A Comprehensive Spatial-Temporal Channel Propagation Model for the Ultrawideband Spectrum 2–8 GHz

Despite the potential for high-speed communications, stringent regulatory mandates on ultrawideband (UWB) emission have hindered its commercial success. By combining resolvable UWB multipath from different directions, multiple-input multiple-output (MIMO) technology can drastically improve link robustness or range. In fact, a plethora of algorithms and coding schemes already exist for UWB-MIMO systems, however these papers use simplistic channel models in simulation and testing. While the temporal characteristics of the UWB propagation channel have been well documented, surprisingly there currently exists but a handful of spatial-temporal models to our knowledge, and only two for bandwidths in excess of 500 MHz. This paper proposes a comprehensive spatial-temporal channel propagation model for the frequency spectrum 2-8 GHz, featuring a host of novel parameters. In order to extract the parameters, we conduct an extensive measurement campaign using a vector network analyzer coupled to a virtual circular antenna array. The campaign includes 160 experiments up to a non line-of-sight range of 35 meters in four buildings with construction material varying from sheetrock to steel.

[1]  S. Zwierzchowski,et al.  A systems and network analysis approach to antenna design for UWB communications , 2003, IEEE Antennas and Propagation Society International Symposium. Digest. Held in conjunction with: USNC/CNC/URSI North American Radio Sci. Meeting (Cat. No.03CH37450).

[2]  Chia-Chin Chong,et al.  A comprehensive model for ultrawideband propagation channels , 2005, GLOBECOM '05. IEEE Global Telecommunications Conference, 2005..

[3]  Camillo Gentile,et al.  A Comprehensive Evaluation of Indoor Ranging Using Ultra-Wideband Technology , 2007, EURASIP J. Wirel. Commun. Netw..

[4]  A.A.M. Saleh,et al.  A Statistical Model for Indoor Multipath Propagation , 1987, IEEE J. Sel. Areas Commun..

[5]  T. Vu Side-lobe control in circular ring array , 1993 .

[6]  Alain Sibille Time-Domain Diversity in Ultra-Wideband MIMO Communications , 2005, EURASIP J. Adv. Signal Process..

[7]  Camillo Gentile,et al.  A Comprehensive Evaluation of Joint Range and Angle Estimation in Ultra-Wideband Location Systems for Indoors , 2008, 2008 IEEE International Conference on Communications.

[8]  Moe Z. Win,et al.  The ultra-wide bandwidth indoor channel: from statistical model to simulations , 2002, IEEE J. Sel. Areas Commun..

[9]  Z. Irahhauten,et al.  An overview of ultra wide band indoor channel measurements and modeling , 2004, IEEE Microwave and Wireless Components Letters.

[10]  J. Kunisch,et al.  Measurement results and modeling aspects for the UWB radio channel , 2002, 2002 IEEE Conference on Ultra Wideband Systems and Technologies (IEEE Cat. No.02EX580).

[11]  Moe Z. Win,et al.  Evaluation of an ultra-wide-band propagation channel , 2002 .

[12]  Kai Yu,et al.  On the tap and cluster angular spreads of indoor WLAN channels , 2004, 2004 IEEE 59th Vehicular Technology Conference. VTC 2004-Spring (IEEE Cat. No.04CH37514).

[13]  Jonas Medbo,et al.  Spatio-temporal channel characteristics at 5 GHz in a typical office environment , 2001, IEEE 54th Vehicular Technology Conference. VTC Fall 2001. Proceedings (Cat. No.01CH37211).

[14]  Dajana Cassioli,et al.  The role of path loss on the selection of the operating bands of UWB systems , 2004, 2004 IEEE 15th International Symposium on Personal, Indoor and Mobile Radio Communications (IEEE Cat. No.04TH8754).

[15]  J. Keignart,et al.  Subnanosecond UWB channel sounding in frequency and temporal domain , 2002, 2002 IEEE Conference on Ultra Wideband Systems and Technologies (IEEE Cat. No.02EX580).

[16]  Ada S. Y. Poon,et al.  Indoor multiple-antenna channel characterization from 2 to 8 GHz , 2003, IEEE International Conference on Communications, 2003. ICC '03..

[17]  R.M. Buehrer,et al.  A new spatial model for impulse-based ultra-wideband channels , 2005, VTC-2005-Fall. 2005 IEEE 62nd Vehicular Technology Conference, 2005..

[18]  J. Takada,et al.  Cluster Properties Investigated From a Series of Ultrawideband Double Directional Propagation Measurements in Home Environments , 2006, IEEE Transactions on Antennas and Propagation.

[19]  Thushara D. Abhayapala,et al.  UWB Spatia - Frequency Channel Characterization , 2006, 2006 IEEE 63rd Vehicular Technology Conference.

[20]  Michael A. Jensen,et al.  Modeling the statistical time and angle of arrival characteristics of an indoor multipath channel , 2000, IEEE Journal on Selected Areas in Communications.

[21]  Scott M. Yano Investigating the ultra-wideband indoor wireless channel , 2002, Vehicular Technology Conference. IEEE 55th Vehicular Technology Conference. VTC Spring 2002 (Cat. No.02CH37367).

[22]  Chia-Chin Chong,et al.  A new statistical wideband spatio-temporal channel model for 5-GHz band WLAN systems , 2003, IEEE J. Sel. Areas Commun..

[23]  D. Cheung,et al.  Spatial correlation of UWB signals in a home environment , 2002, 2002 IEEE Conference on Ultra Wideband Systems and Technologies (IEEE Cat. No.02EX580).

[24]  H.A. Khan,et al.  Ultra wideband multiple-input multiple-output radar , 2005, IEEE International Radar Conference, 2005..

[25]  Camillo Gentile,et al.  A Frequency-Dependence Model for the Ultrawideband Channel Based on Propagation Events , 2007, IEEE Transactions on Antennas and Propagation.

[26]  Rodney G. Vaughan,et al.  Channels, Propagation and Antennas for Mobile Communications , 2003 .

[27]  Liuqing Yang,et al.  Analog space-time coding for multiantenna ultra-wideband transmissions , 2004, IEEE Transactions on Communications.

[28]  Xuefeng Yin,et al.  Cluster Characteristics in a MIMO Indoor Propagation Environment , 2007, IEEE Transactions on Wireless Communications.

[29]  K. J. Ray Liu,et al.  Multiband-OFDM MIMO coding framework for UWB communication systems , 2006, IEEE Transactions on Signal Processing.

[30]  Constantine A. Balanis,et al.  Antenna Theory: Analysis and Design , 1982 .

[31]  Dajana Cassioli,et al.  UWB propagation measurements by PN-sequence channel sounding , 2004, 2004 IEEE International Conference on Communications (IEEE Cat. No.04CH37577).

[32]  D. Cassioli,et al.  A multi-wall path loss model for indoor UWB propagation , 2005, 2005 IEEE 61st Vehicular Technology Conference.

[33]  Kaveh Pahlavan,et al.  Super-resolution TOA estimation with diversity for indoor geolocation , 2004, IEEE Transactions on Wireless Communications.

[34]  H. Hashemi,et al.  The indoor radio propagation channel , 1993, Proc. IEEE.

[35]  Larry J. Greenstein,et al.  UWB delay profile models for residential and commercial indoor environments , 2005, IEEE Transactions on Vehicular Technology.