A 60GHz CMOS phased-array transceiver pair for multi-Gb/s wireless communications

Recent advances in silicon technology, mm-Wave integrated circuit/antenna/package design, and beam-forming techniques at 60GHz, together with the emergence of suitable wireless standards, have enabled consumer electronics products to support wireless transmission of multi-Gb/s data such as high-definition (HD) audio/video content [1,2]. Further expansion into portable and mobile platforms will require lower power consumption, smaller form factor, and lower cost. This paper describes a fully integrated, low-cost 60GHz phased-array transceiver pair, implemented in 65nm standard digital CMOS and packaged with an embedded antenna array, capable of robust 10m non-line of sight (NLOS) communication. The array is configurable from 32 elements to 8 or fewer elements, making the transceiver pair suitable for both fixed, high-data-rate and portable, low-power applications. To enhance the robustness of the multi-element design, dynamic phase shifters allow the beam direction to be changed in real time to adapt to changing environments without interruption of the multi-Gb/s data stream. The transceiver pair supports the WirelessHD and draft 802.11ad (WiGig) standards at maximum data rates of 7.14Gb/s and 6.76Gb/s, respectively.

[1]  Alberto Valdes-Garcia,et al.  A SiGe BiCMOS 16-element phased-array transmitter for 60GHz communications , 2010, 2010 IEEE International Solid-State Circuits Conference - (ISSCC).

[2]  Jeffrey M. Gilbert,et al.  A 4-Gbps Uncompressed Wireless HD A/V Transceiver Chipset , 2008, IEEE Micro.

[3]  R.W. Brodersen,et al.  Millimeter-wave CMOS design , 2005, IEEE Journal of Solid-State Circuits.