Preserving rapid prototypes: a review

Rapid Prototyping (RP) has revolutionized the world of manufacturing. It has gained popularity among designers and artists, having developed from a visualization tool to a manufacturing tool for end-use products. Rapid-prototyped objects are being accessed by museums and the technology is being adopted for conservation applications. The review identifies the current most commonly used polymer based RP technologies and materials that are likely to enter museum collections, and formulates informed research topics related to their conservation. A knowledge exchange project was conducted with artists and designers using the technology via an online survey and interviews. The main technologies and materials used by artists and designers were identified and investigated including research that has been done into the stability of RP manufactured objects. Since these may be uniquely post-processed by artists and designers, RP objects are often irreplaceable, i.e. cannot simply be reprinted. The evolution from rapid prototyping (RP) to additive manufacturing (AM) has resulted in extensive research into the mechanical properties and short-term stability of prototypes. However, very little research has been conducted into RP from the conservation perspective particularly long-term stability studies. Since RP technology is rapidly developing, it is crucial that conservators and scientists follow and inform these developments.Graphical abstractSix prints executed in different polymers of an RP artwork “Out of the Cauldron” by the artist Tom Lomax, before and after a photodegradation experiment

[1]  Tuan Quoc Nguyen,et al.  Polymer Degradation and Stabilization , 2008 .

[2]  Srinivasa Prakash Regalla,et al.  Multi-objective optimisation of strength and volumetric shrinkage of FDM parts , 2014 .

[3]  R. Hague,et al.  A study of the impact of short-term ageing on the mechanical properties of a stereolithography resin , 2007 .

[4]  Terry Wohlers,et al.  Wohlers report 2016 , 2016 .

[5]  Jon Gray,et al.  The Work of Art in the Age of Mechanical Reproduction , 2013 .

[6]  Yong Liu,et al.  3D printing of smart materials: A review on recent progresses in 4D printing , 2015 .

[7]  C. H. Ahrens,et al.  Stereolithography Somos 7110 photosensitive resin: study of curing kinetic and thermal degradation , 2005 .

[8]  Donald Garlotta,et al.  A Literature Review of Poly(Lactic Acid) , 2001 .

[9]  L. Lim,et al.  Poly(Lactic Acid): Synthesis, Structures, Properties, Processing, and Applications , 2010 .

[10]  Diana Gregor Svetec,et al.  Colorimetric Properties and Stability of 3D Prints , 2012 .

[11]  Y. Shashoua.  Conservation of plastics : materials science, degradation and preservation , 2008 .

[12]  Rachel A. Tomlinson,et al.  Anisotropy, homogeneity and ageing in an SLS polymer , 2011 .

[13]  Johannes Wortberg,et al.  Influence of surface characteristics on fatigue behaviour of laser sintered plastics , 2012 .

[14]  Andreas Reichinger,et al.  3D Printing for Cultural Heritage: Preservation, Accessibility, Research and Education , 2014, 3D Research Challenges in Cultural Heritage.

[15]  R. Wicker,et al.  Effects of environmental conditions, aging, and build orientations on the mechanical properties of ASTM type I specimens manufactured via stereolithography , 2012 .

[16]  Francesca De Crescenzio,et al.  3D restitution, restoration and prototyping of a medieval damaged skull , 2008 .

[17]  Xue Yan,et al.  PII: 0010-4485(95)00035-6 , 2003 .

[18]  Torsten Rauch,et al.  Advanced UV Lasers Enable Precision Processing , 2009 .

[19]  Joseph Pegna,et al.  Environmental impacts of rapid prototyping: an overview of research to date , 2006 .

[20]  Neil Hopkinson,et al.  Effect of section thickness and build orientation on tensile properties and material characteristics of laser sintered nylon‐12 parts , 2011 .

[21]  D. Dimitrov,et al.  Advances in three dimensional printing – state of the art and future perspectives , 2006 .

[22]  Simona Bronco,et al.  Thermal degradation of poly(lactic acid) (PLA) and poly(butylene adipate-co-terephthalate) (PBAT) and their blends upon melt processing , 2009 .

[23]  R. Hague,et al.  Laser sintering of polyamides and other polymers , 2012 .

[24]  Rafiq Noorani,et al.  Rapid prototyping : principles and applications , 2006 .

[25]  M. Celina.  Review of polymer oxidation and its relationship with materials performance and lifetime prediction , 2013 .

[26]  Duc Truong Pham,et al.  A comparison of rapid prototyping technologies , 1998 .

[27]  Bruno Arnaldi,et al.  Preservative Approach to Study Encased Archaeological Artefacts , 2014, EuroMed.

[28]  John Scheirs,et al.  Compositional and Failure Analysis of Polymers: A Practical Approach , 2000 .

[29]  Daniel Roy Eyers,et al.  Additive manufacturing for archaeological reconstruction of a medieval ship , 2012 .

[30]  Chee Kai Chua,et al.  3D printing and additive manufacturing : principles and applications , 2015 .

[31]  Stephan Irsen,et al.  Ageing of acrylate‐based resins for stereolithography: thermal and humidity ageing behaviour studies , 2008 .

[32]  Massimo Lazzari,et al.  Plastic matters: an analytical procedure to evaluate the degradability of contemporary works of art , 2011, Analytical and bioanalytical chemistry.

[33]  Cary Karp.  Digital Heritage in Digital Museums , 2014 .

[34]  J. Usher,et al.  The effect of process conditions on mechanical properties of laser‐sintered nylon , 2011 .

[35]  P. Wright,et al.  Anisotropic material properties of fused deposition modeling ABS , 2002 .

[36]  J. Partanen.  Solid state lasers for stereolithography , 1996 .

[37]  P. Tarantili,et al.  Stability of ABS Compounds Subjected to Repeated Cycles of Extrusion Processing , 2009 .

[38]  R. Knitter,et al.  Rapid Prototyping and Rapid Tooling Techniques for the Manufacturing of Silicon, Polymer, Metal and Ceramic Microdevices , 2006 .

[39]  Cary Karp.  Digital Heritage in Digital Museums , 2004 .

[40]  Tom Learner,et al.  Preserving Plastics: An Evolving Material, a Maturing Profession , 2014 .

[41]  Carlos Alberto Costa,et al.  Rapid Prototyping Material Degradation: a Study of Mechanical Properties , 2013 .

[42]  Gerald Scott,et al.  Polymer Degradation and Stabilisation , 1988 .

[43]  Uwe Berger,et al.  Aspects of accuracy and precision in the additive manufacturing of plastic gears , 2015 .

[44]  R. E. Colborn,et al.  Acrylonitrile-Butadiene-Styrene , 1993 .

[45]  Wai Yee Yeong,et al.  Shape recovery effect of 3D printed polymeric honeycomb , 2015 .

[46]  Krassimir Dotchev,et al.  Recycling of polyamide 12 based powders in the laser sintering process , 2009 .

[47]  Valdir Soldi,et al.  Investigations on cure kinetics and thermal degradation of stereolithography Renshape™ 5260 photosensitive resin , 2008 .

[48]  Gideon Levy,et al.  RAPID MANUFACTURING AND RAPID TOOLING WITH LAYER MANUFACTURING (LM) TECHNOLOGIES, STATE OF THE ART AND FUTURE PERSPECTIVES , 2003 .