Performance enhancement in proton exchange membrane cell - numerical modeling and optimisation

[1]  V. Antonucci,et al.  Technology up date and new strategies on fuel cells , 2001 .

[2]  Sirivatch Shimpalee,et al.  Numerical studies on rib & channel dimension of flow-field on PEMFC performance , 2007 .

[3]  Nigel M. Sammes,et al.  Fuel cell technology : reaching towards commercialization , 2006 .

[4]  N. Stander,et al.  A dynamic penalty function method for the solution of structural optimization problems , 1994 .

[5]  Weeratunge Malalasekera,et al.  An introduction to computational fluid dynamics - the finite volume method , 2007 .

[6]  Ned Djilali,et al.  THREE-DIMENSIONAL COMPUTATIONAL ANALYSIS OF TRANSPORT PHENOMENA IN A PEM FUEL CELL , 2002 .

[7]  A. Parthasarathy,et al.  Pressure Dependence of the Oxygen Reduction Reaction at the Platinum Microelectrode/Nafion Interface: Electrode Kinetics and Mass Transport , 1992 .

[8]  Ralph E. White,et al.  A water and heat management model for proton-exchange-membrane fuel cells , 1993 .

[9]  Roongrojana Songprakorp,et al.  Investigation of transient phenomena of proton exchange membrane fuel cells , 2008 .

[10]  Hongtan Liu,et al.  Modelling of performance of PEM fuel cells with conventional and interdigitated flow fields , 1999 .

[11]  Loreto Daza,et al.  Optimisation of flow-field in polymer electrolyte membrane fuel cells using computational fluid dynamics techniques , 2000 .

[12]  G. Lindbergh,et al.  Investigation of Mass-Transport Limitations in the Solid Polymer Fuel Cell Cathode II. Experimental , 2002 .

[13]  I. Dincer,et al.  A worldwide perspective on energy, environment and sustainable development , 1998 .

[14]  Giovanni Tanda,et al.  Heat transfer and pressure drop in a rectangular channel with diamond-shaped elements , 2001 .

[15]  Markku J. Lampinen,et al.  A mathematical model and optimization of the structure for porous air electrodes , 1990 .

[16]  J. Adin Mann,et al.  Two-Phase Transport in PEM Fuel Cell Cathodes , 2008 .

[17]  G. Janssen,et al.  A Phenomenological Model of Water Transport in a Proton Exchange Membrane Fuel Cell , 2001 .

[18]  Søren Knudsen Kær,et al.  Flow and Pressure Distribution in Fuel Cell Manifolds , 2010 .

[19]  Wei-Mon Yan,et al.  Analysis of reactant gas transport in a PEM fuel cell with partially blocked fuel flow channels , 2005 .

[20]  Karen A. Thole,et al.  Heat Transfer From Low Aspect Ratio Pin Fins , 2007 .

[21]  Wei-Mon Yan,et al.  Effects of flow distributor geometry and diffusion layer porosity on reactant gas transport and performance of proton exchange membrane fuel cells , 2004 .

[22]  Frano Barbir,et al.  PEM Fuel Cells: Theory and Practice , 2012 .

[23]  Gen Inoue,et al.  Effect of gas channel depth on current density distribution of polymer electrolyte fuel cell by numerical analysis including gas flow through gas diffusion layer , 2006 .

[24]  J. Snyman.  A new and dynamic method for unconstrained minimization , 1982 .

[25]  Peter Eberhard,et al.  Some advantages of stochastic methods in multicriteria optimization of multibody systems , 1999 .

[26]  Chao-Yang Wang,et al.  Electron Transport in PEFCs , 2004 .

[27]  Oguz Uzol,et al.  Heat Transfer, Pressure Loss and Flow Field Measurements Downstream of Staggered Two-Row Circular and Elliptical Pin Fin Arrays , 2005 .

[28]  P. Rodatz,et al.  Operational aspects of a large PEFC stack under practical conditions , 2004 .

[29]  Chao-Yang Wang,et al.  Fundamental models for fuel cell engineering. , 2004, Chemical reviews.

[30]  Tianshou Zhao,et al.  A new flow field design for polymer electrolyte-based fuel cells , 2007 .

[31]  J. Kerres,et al.  Blended and Cross‐Linked Ionomer Membranes for Application in Membrane Fuel Cells , 2005 .

[32]  Daniel S. Hussey,et al.  PEM fuel cell membrane hydration measurement by neutron imaging , 2006 .

[33]  San Ping Jiang,et al.  A mathematical model of polymer electrolyte fuel cell with anode CO kinetics , 2003 .

[34]  Dawn Bernardi,et al.  Water‐Balance Calculations for Solid‐Polymer‐Electrolyte Fuel Cells , 1990 .

[35]  P. Stonehart,et al.  Further development of an approximate model for mass transfer with reaction in porous gas-diffusion electrodes to include substrate effects , 1989 .

[36]  Chaoyang Wang,et al.  Two-Phase Modeling and Flooding Prediction of Polymer Electrolyte Fuel Cells , 2005 .

[37]  Ouyang Minggao,et al.  Mathematical Modeling of Vehicle Fuel Cell Power System Thermal Management , 2003 .

[38]  Josua P. Meyer,et al.  Jets in Crossflow Mixing Analysis Using Computational Fluid Dynamics and Mathematical Optimization , 2007 .

[39]  Jin Hyun Nam,et al.  Effective diffusivity and water-saturation distribution in single- and two-layer PEMFC diffusion medium , 2003 .

[40]  T. N. Stevenson,et al.  Fluid Mechanics , 2021, Nature.

[41]  H. Toghiani,et al.  Steady state and dynamic performance of proton exchange membrane fuel cells (PEMFCs) under various operating conditions and load changes , 2006 .

[42]  Wei Jiang,et al.  Parameter sensitivity examination and discussion of PEM fuel cell simulation model validation. Part I. Current status of modeling research and model development , 2006 .

[43]  Atilla Biyiko,et al.  Review of proton exchange membrane fuel cell models , 2005 .

[44]  Geping Yin,et al.  Effective protonic and electronic conductivity of the catalyst layers in proton exchange membrane fuel cells , 2004 .

[45]  J. Painuly.  Barriers to renewable energy penetration; a framework for analysis , 2001 .

[46]  J. Snyman,et al.  The Dynamic-Q optimization method: An alternative to SQP? , 2002 .

[47]  S. Dutta,et al.  Predicting the Effect of Gas-Flow Channel Spacing on Current Density in PEM Fuel Cells , 1999, Advanced Energy Systems.

[48]  Lin Wang,et al.  Performance studies of PEM fuel cells with interdigitated flow fields , 2004 .

[49]  Shou-Shing Hsieh,et al.  Channel and rib geometric scale effects of flowfield plates on the performance and transient thermal behavior of a micro-PEM fuel cell , 2007 .

[50]  Petr Schneider,et al.  Dynamic transport of multicomponent mixtures of gases in porous solids , 1995 .

[51]  Sreenivas Jayanti,et al.  Flow distribution and pressure drop in parallel-channel configurations of planar fuel cells , 2005 .

[52]  P. Stonehart,et al.  Simulation and optimization of porous gas-diffusion electrodes used in hydrogen/oxygen phosphoric acid fuel cells—I. Application of cathode model simulation and optimization to PAFC cathode development , 1990 .

[53]  Trung Van Nguyen,et al.  A Gas Distributor Design for Proton‐Exchange‐Membrane Fuel Cells , 1996 .

[54]  Adrian Bejan,et al.  Constructal PEM fuel cell stack design , 2005 .

[55]  Luca A. Tagliafico,et al.  A Thermodynamic Method for the Comparison of Plate-Fin Heat Exchanger Performance , 1996 .

[56]  C. J. Aldridge,et al.  Mathematical Modelling of Two-Phase Flow in Boilers , 1991 .

[57]  Tae-Hee Lee,et al.  A study on the characteristics of the diffusion layer thickness and porosity of the PEMFC , 2004 .

[58]  Ramana G. Reddy,et al.  Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells , 2003 .

[59]  Andrew B. Bocarsly,et al.  Mechanical properties of Nafion and titania/Nafion composite membranes for polymer electrolyte membrane fuel cells , 2006 .

[60]  Xuan Liu,et al.  Water flooding and pressure drop characteristics in flow channels of proton exchange membrane fuel cells , 2007 .

[61]  Ramana G. Reddy,et al.  Modeling of polymer electrolyte membrane fuel cell with metal foam in the flow-field of the bipolar/end plates , 2003 .

[62]  Josua P. Meyer,et al.  Optimization of Gas Turbine Combustor Mixing for Improved Exit Temperature Profile , 2010 .

[63]  Xianguo Li,et al.  A flow channel design procedure for PEM fuel cells with effective water removal , 2007 .

[64]  J P Meyer,et al.  Constructal law in technology, thermofluid and energy systems, and in design education: comment on "The constructal law and the evolution of design in nature" by A. Bejan and S. Lorente. , 2011, Physics of life reviews.

[65]  Adam Z. Weber,et al.  Transport in Polymer-Electrolyte Membranes III. Model Validation in a Simple Fuel-Cell Model , 2004 .

[66]  Latif M. Jiji.  HEAT TRANSFER IN CHANNEL FLOW , 2009 .

[67]  D. Stolten,et al.  Modeling of Mass and Heat Transport in Planar Substrate Type SOFCs , 2003 .

[68]  M. Deluchi,et al.  Hydrogen vehicles: an evaluation of fuel storage, performance, safety, environmental impacts, and cost , 1989 .

[69]  T. Nguyen,et al.  Multicomponent transport in porous electrodes of proton exchange membrane fuel cells using the interdigitated gas distributors , 1999 .

[70]  Hyunchul Ju,et al.  A single-phase, non-isothermal model for PEM fuel cells , 2005 .

[71]  J. Giner,et al.  The Mechanism of Operation of the Teflon‐Bonded Gas Diffusion Electrode: A Mathematical Model , 1969 .

[72]  Wei-Mon Yan,et al.  Local transport phenomena and cell performance of PEM fuel cells with various serpentine flow field designs , 2008 .

[73]  O. N. Şara,et al.  Performance analysis of rectangular ducts with staggered square pin fins , 2003 .

[74]  T. Muneer,et al.  Energy supply, its demand and security issues for developed and emerging economies , 2007 .

[75]  Chris Hendry,et al.  An emerging market in fuel cells? Residential combined heat and power in four countries , 2007 .

[76]  T. Papanastasiou,et al.  Viscous Fluid Flow , 1999 .

[77]  Wei-Mon Yan,et al.  Numerical study of cell performance and local transport phenomena in PEM fuel cells with various flow channel area ratios , 2007 .

[78]  Ranga Pitchumani,et al.  Analysis and design of PEM fuel cells , 2005 .

[79]  Song-Yul Choe,et al.  A high dynamic PEM fuel cell model with temperature effects , 2005 .

[80]  Wei-Mon Yan,et al.  Numerical study of reactant gas transport phenomena and cell performance of proton exchange membrane fuel cells , 2006 .

[81]  Z. H. Wang,et al.  Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells , 2000 .

[82]  Kwang‐Yong Kim,et al.  Shape Optimization of Micro-Channel Heat Sink for Micro-Electronic Cooling , 2008, IEEE Transactions on Components and Packaging Technologies.

[83]  Edward A. Grens,et al.  A model for analysis of porous gas electrodes , 1964 .

[84]  A. Weber,et al.  Modeling transport in polymer-electrolyte fuel cells. , 2004, Chemical reviews.

[85]  Edson A. Ticianelli,et al.  Development and electrochemical studies of gas diffusion electrodes for polymer electrolyte fuel cells , 1996 .

[86]  Wei Yuan,et al.  Model prediction of effects of operating parameters on proton exchange membrane fuel cell performance , 2010 .

[87]  Qingfeng Li,et al.  Approaches and Recent Development of Polymer Electrolyte Membranes for Fuel Cells Operating above 100 °C , 2003 .

[88]  Young-Bae Kim,et al.  Study on the effect of humidity and stoichiometry on the water saturation of PEM fuel cells , 2012 .

[89]  James F. Miller,et al.  Challenges for fuel cells in transport applications , 2000 .

[90]  Chao-Yang Wang,et al.  Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells , 2000 .

[91]  Jack C. Parker,et al.  A parametric model for constitutive properties governing multiphase flow in porous media , 1987 .

[92]  Jan A Snyman,et al.  Practical Mathematical Optimization: An Introduction to Basic Optimization Theory and Classical and New Gradient-Based Algorithms , 2005 .

[93]  P. Stonehart,et al.  Simulation and optimization of porous gas-diffusion electrodes used in hydrogen oxygen phosphoric acid fuel cells. II, Development of a detailed anode model , 1991 .

[94]  Jan A. Snyman,et al.  The LFOPC leap-frog algorithm for constrained optimization , 2000 .

[95]  Gary W. Frey,et al.  Hydropower as a renewable and sustainable energy resource meeting global energy challenges in a reasonable way , 2002 .

[96]  Titichai Navessin,et al.  A mathematical model and optimization of the cathode catalyst layer structure in PEM fuel cells , 2004 .

[97]  Jenn-Jiang Hwang,et al.  Effect of flow orientation on thermal-electrochemical transports in a PEM fuel cell , 2006 .

[98]  Werner Lehnert,et al.  Diffusion media materials and characterisation , 2010 .

[99]  Thomas A. Trabold,et al.  Effects of Flow Field and Diffusion Layer Properties on Water Accumulation in a PEM Fuel Cell , 2007 .

[100]  Sadik Kakac,et al.  Two‐dimensional model for proton exchange membrane fuel cells , 1998 .

[101]  Chang-Gi Kim,et al.  Numerical analysis of a polymer electrolyte fuel cell , 2004 .

[102]  Cheng-Ching Yu,et al.  Operation-relevant modeling of an experimental proton exchange membrane fuel cell , 2007 .

[103]  Matthew M. Mench,et al.  Fuel Cell Engines , 2008 .

[104]  Wei-Mon Yan,et al.  Humidity of reactant fuel on the cell performance of PEM fuel cell with baffle-blocked flow field designs , 2006 .

[105]  S. O. Obayopo,et al.  Performance enhancement of a PEM fuel cell through reactant gas channel and gas diffusion layer optimisation , 2011 .

[106]  Young-Min Kang,et al.  The effect of channel flow pattern on internal properties distribution of a proton exchange membrane fuel cell for cathode starvation conditions , 2010 .

[107]  Ibrahim Dincer,et al.  Environmental and sustainability aspects of hydrogen and fuel cell systems , 2007 .

[108]  Jürgen Mergel,et al.  Interaction between the diffusion layer and the flow field of polymer electrolyte fuel cells—experiments and simulation studies , 2003 .

[109]  Xianguo Li,et al.  Review of bipolar plates in PEM fuel cells: Flow-field designs , 2005 .

[110]  ARTHUR SCHUSTER,et al.  The Kinetic Theory of Gases , 1895, Nature.

[111]  Mark W. Verbrugge,et al.  Analysis of Promising Perfluorosulfonic Acid Membranes for Fuel‐Cell Electrolytes , 1990 .

[112]  Alexander Morrison Hay.  Optimal dimensional synthesis of planar parallel manipulators with respect to workspaces. , 2004 .

[113]  S. H. Chan,et al.  Catalyst Layer Models for Proton Exchange Membrane Fuel Cells , 2001 .

[114]  P. Moseley.  Fuel Cell Systems Explained , 2001 .

[115]  Jenn-Kun Kuo,et al.  Study of operational parameters on the performance of micro PEMFCs with different flow fields , 2006 .

[116]  James J. McGuirk,et al.  2D and 3D Modeling of a PEMFC Cathode with Interdigitated Gas Distributors , 2005 .

[117]  Ned Djilali,et al.  A 3D, Multiphase, Multicomponent Model of the Cathode and Anode of a PEM Fuel Cell , 2003 .

[118]  Loyalka.  Gas transport in porous media: The dusty gas model By . Elsevier, Amsterdam/New York, 1983, viii + 194 pp. $53.25 , 1984 .

[119]  Wei-Mon Yan,et al.  Analysis of thermal and water management with temperature-dependent diffusion effects in membrane of proton exchange membrane fuel cells , 2004 .

[120]  Zongqiang Mao,et al.  The effects of pinholes on proton exchange membrane fuel cell performance , 2011 .

[121]  S. O. Obayopo,et al.  Thermodynamic Optimization of Proton Exchange Membrane Fuel Cell System , 2010 .

[122]  N. Stander,et al.  New Successive Approximation Method for Optimum Structural Design , 1994 .

[123]  Biao Zhou,et al.  Water and pressure effects on a single PEM fuel cell , 2006 .

[124]  Brant A. Peppley,et al.  Modeling the Influence of GDL and flow-field plate parameters on the reaction distribution in the PEMFC cathode catalyst layer , 2005 .

[125]  A. Mawardi,et al.  Effects of parameter uncertainty on the performance variability of proton exchange membrane (PEM) fuel cells , 2006 .

[126]  Spyros Sklavounos,et al.  Evaluation of hazards associated with hydrogen storage facilities , 2005 .

[127]  Arthur W. Rose,et al.  Porous media: Fluid transport and pore structure (2nd Ed.) , 1993 .

[128]  Nathan P. Siegel,et al.  On the influence of temperature on PEM fuel cell operation , 2006 .

[129]  Jun Ni,et al.  Flow channel shape optimum design for hydroformed metal bipolar plate in PEM fuel cell , 2008 .

[130]  Ayoub Kazim,et al.  Effects of cathode operating conditions on performance of a PEM fuel cell with interdigitated flow fields , 2003 .

[131]  Soosan Rowshanzamir,et al.  Effects of operating parameters on performance of a proton exchange membrane fuel cell , 2006 .

[132]  Falin Chen,et al.  Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell , 2003 .

[133]  S. Dutta,et al.  NUMERICAL PREDICTION OF TEMPERATURE DISTRIBUTION IN PEM FUEL CELLS , 2000 .

[134]  S. Dutta,et al.  Numerical prediction of mass-exchange between cathode and anode channels in a PEM fuel cell , 2001 .

[135]  Trung Van Nguyen,et al.  Three-dimensional effects of liquid water flooding in the cathode of a PEM fuel cell , 2003 .

[136]  Brant A. Peppley,et al.  A Review of Mathematical Models for Hydrogen and Direct Methanol Polymer Electrolyte Membrane Fuel Cells , 2004 .

[137]  Mark A.J Cropper,et al.  Fuel cells: a survey of current developments , 2004 .

[138]  M. Verbrugge,et al.  Mathematical model of a gas diffusion electrode bonded to a polymer electrolyte , 1991 .

[139]  Chao-Yang Wang,et al.  Multiphase flow and heat transfer in porous media , 1997 .

[140]  Biao Zhou,et al.  Water and thermal management for Ballard PEM fuel cell stack , 2005 .

[141]  S. F. Lee,et al.  Oxygen mass transfer in PEM fuel cell gas diffusion layers , 2004 .

[142]  T. Zhou,et al.  A 3D model for PEM fuel cells operated on reformate , 2004 .

[143]  Wei-Mon Yan,et al.  Reactant gas transport and cell performance of proton exchange membrane fuel cells with tapered flow field design , 2006 .

[144]  G. Peterson,et al.  Geometric optimization of a micro heat sink with liquid flow , 2006, IEEE Transactions on Components and Packaging Technologies.

[145]  Xianguo Li,et al.  Modeling and Simulation of PEM Fuel Cells With CO Poisoning , 2003 .

[146]  T. Springer,et al.  Polymer Electrolyte Fuel Cell Model , 1991 .

[147]  Frano Barbir,et al.  An Analytical Solution of a Half‐Cell Model for PEM Fuel Cells , 2000 .

[148]  D. Maillet,et al.  Modelling of heat, mass and charge transfer in a PEMFC single cell , 2005 .

[149]  Kyoungdoug Min,et al.  Configuration effects of air, fuel, and coolant inlets on the performance of a proton exchange membrane fuel cell for automotive applications , 2009 .

[150]  T. Nguyen,et al.  Two-phase flow model of the cathode of PEM fuel cells using interdigitated flow fields , 2000 .

[151]  Sirivatch Shimpalee,et al.  The impact of channel path length on PEMFC flow-field design , 2006 .

[152]  T. Bello-Ochende,et al.  Mathematical Optimization: Application to the Design of Optimal Micro-channel Heat Sinks , 2009, 2009 3rd Southern Conference on Computational Modeling.

[153]  Ghazi A. Karim,et al.  Hydrogen as a spark ignition engine fuel , 2003 .

[154]  Xianguo Li,et al.  Mathematical modeling of proton exchange membrane fuel cells , 2001 .

[155]  Mark W. Verbrugge,et al.  A Mathematical Model of the Solid‐Polymer‐Electrolyte Fuel Cell , 1992 .

[156]  Edward S. Grens,et al.  Analysis of Operation of Porous Gas Electrodes with Two Superimposed Scales of Pore Structure , 1966 .

[157]  Josua P. Meyer,et al.  Operating conditions of an open and direct solar thermal Brayton cycle with optimised cavity receive , 2011 .

[158]  A. Bejan,et al.  Constructal multi-scale pin fins , 2010 .

[159]  P. E. Uys,et al.  Investigation of the applicability of the dynamic-Q optimisation algorithm to vehicle suspension design , 2003 .