Quantum Physics and Deep Learning to Reveal Multiple Dimensional Modified Regulation by Ternary Substitution of Iron, Manganese, and Cobalt on Na3V2(PO4)3 for Superior Sodium Storage

[1]  Xing-long Wu,et al.  An Advanced High‐Entropy Fluorophosphate Cathode for Sodium‐Ion Batteries with Increased Working Voltage and Energy Density , 2022, Advanced materials.

[2]  Xuebin Wang,et al.  Atomically Dispersed, Low-Coordinate Co-N Sites on Carbon Nanotubes as Inexpensive and Efficient Electrocatalysts for Hydrogen Evolution. , 2021, Small.

[3]  K. Yuan,et al.  Optimizing Microenvironment of Asymmetric N,S-Coordinated Single-Atom Fe via Axial Fifth Coordination toward Efficient Oxygen Electroreduction. , 2021, Small.

[4]  Que Huang,et al.  Simultaneous optimization of K/Co co-substituted Na3V2(PO4)3/C nano particles enwrapped on lamellar rGO substrate with high performance for asymmetric sodium ion full cell , 2021, Applied Surface Science.

[5]  Yichun Liu,et al.  Air/water/temperature-stable cathode for all-climate sodium-ion batteries , 2021, Cell Reports Physical Science.

[6]  Que Huang,et al.  Constructing hierarchical porous Fe/F-codoped Na3V2(PO4)3/C composite enwrapped with carbon nanotubes as high-performance cathode for symmetric sodium ion batteries , 2021, Journal of Power Sources.

[7]  N. R. Shiju,et al.  Control over Electrochemical CO2 Reduction Selectivity by Coordination Engineering of Tin Single‐Atom Catalysts , 2021, Advanced science.

[8]  F. Pan,et al.  Nitrogen Vacancy Induced Coordinative Reconstruction of Single‐Atom Ni Catalyst for Efficient Electrochemical CO2 Reduction , 2021, Advanced Functional Materials.

[9]  Chao Wang,et al.  Constructing dimensional gradient structure of Na3V2(PO4)3/C@CNTs-WC by wolfram substitution for superior sodium storage , 2021 .

[10]  Fei Li,et al.  A Tandem Strategy for Enhancing Electrochemical CO2 Reduction Activity of Single-Atom Cu-S1N3 Catalysts via Integration with Cu Nanoclusters. , 2021, Angewandte Chemie.

[11]  Y. Lai,et al.  Engineering Fe–N Coordination Structures for Fast Redox Conversion in Lithium–Sulfur Batteries , 2021, Advanced materials.

[12]  Geoffrey I N Waterhouse,et al.  MIL‐101‐Derived Mesoporous Carbon Supporting Highly Exposed Fe Single‐Atom Sites as Efficient Oxygen Reduction Reaction Catalysts , 2021, Advanced materials.

[13]  Xiaofeng Shi,et al.  Boosting the rate capability and working lifespan of K/Co co-doped Na3V2(PO4)3/C for sodium ion batteries , 2021 .

[14]  V. Mathew,et al.  Chromium doping into NASICON-structured Na3V2(PO4)3 cathode for high-power Na-ion batteries , 2021 .

[15]  Junmei Zhao,et al.  A Novel NASICON‐Typed Na4VMn0.5Fe0.5(PO4)3 Cathode for High‐Performance Na‐Ion Batteries , 2021, Advanced Energy Materials.

[16]  C. Yuan,et al.  Construction and Operating Mechanism of High‐Rate Mo‐Doped Na3V2(PO4)3@C Nanowires toward Practicable Wide‐Temperature‐Tolerance Na‐Ion and Hybrid Li/Na‐Ion Batteries , 2021, Advanced Energy Materials.

[17]  Erik A. Wu,et al.  A stable cathode-solid electrolyte composite for high-voltage, long-cycle-life solid-state sodium-ion batteries , 2021, Nature Communications.

[18]  V. Mathew,et al.  C-Na3V1.96Fe0.04(PO4)3/Fe2P nanoclusters with stable charge-transfer interface for high-power sodium ion batteries , 2021 .

[19]  Jun Lu,et al.  Counter‐Intuitive Structural Instability Aroused by Transition Metal Migration in Polyanionic Sodium Ion Host , 2020, Advanced Energy Materials.

[20]  Xu Yang,et al.  Enhanced electrode kinetics and properties via anionic regulation in polyanionic Na3+xV2(PO4)3−x(P2O7)x cathode material , 2020 .

[21]  Subham Ghosh,et al.  Impact of Mg2+ and Al3+ Substitutions on the Structural and Electrochemical Properties of NASICON-Nax VMn0.75 M0.25 (PO4 )3 (M = Mg and Al) Cathodes for Sodium-Ion Batteries. , 2020, Small.

[22]  V. Thangadurai,et al.  Understanding the Na-Ion Storage Mechanism in Na3+xV2–xMx(PO4)3 (M = Ni2+, Co2+, Mg2+; x = 0.1–0.5) Cathodes , 2020 .

[23]  Zhongzhen Yu,et al.  Freestanding Na3V2O2(PO4)2F/Graphene Aerogels as High-Performance Cathodes of Sodium-Ion Full Batteries. , 2020, ACS applied materials & interfaces.

[24]  A. Abouimrane,et al.  Temperature-dependent battery performance of a Na3V2(PO4)2F3 cathode and in-situ heat generation on cycling. , 2020, ChemSusChem.

[25]  H. Yao,et al.  Na3V2(PO4)3/Porous Carbon Skeleton Embellished with ZIF-67 for Sodium-Ion Storage. , 2020, Inorganic chemistry.

[26]  F. Colò,et al.  Na 3 V 2 (PO 4 ) 3 ‐Supported Electrospun Carbon Nanofiber Nonwoven Fabric as Self‐Standing Na‐Ion Cell Cathode , 2020 .

[27]  Jesse S. Ko,et al.  NASICON Na3V2(PO4)3 Enables Quasi-Two-Stage Na+ and Zn2+ Intercalation for Multivalent Zinc Batteries , 2020 .

[28]  Ling-Ling Xie,et al.  Na3V2(PO4)3@NC composite derived from polyaniline as cathode material for high‐rate and ultralong‐life sodium‐ion batteries , 2020, International Journal of Energy Research.

[29]  H. Zhuo,et al.  Electrospun Na3V2(PO4)3/C nanofibers as self-standing cathode material for high performance sodium ion batteries , 2020, Materials Research Express.

[30]  G. Ceder,et al.  A High‐Energy NASICON‐Type Cathode Material for Na‐Ion Batteries , 2020, Advanced Energy Materials.

[31]  J. Xu,et al.  Fabrication of porous Na3V2(PO4)3/reduced graphene oxide hollow spheres with enhanced sodium storage performance. , 2020, Journal of colloid and interface science.

[32]  Deman Han,et al.  Carbon‐Coated Na 3 V 2 (PO 4 ) 3 Supported on Multiwalled Carbon Nanotubes for Half‐/Full‐Cell Sodium‐Ion Batteries , 2020 .

[33]  Jianjing Li,et al.  Day-ahead power forecasting in a large-scale photovoltaic plant based on weather classification using LSTM , 2019, Energy.

[34]  Cheng Lu,et al.  Manganese acting as a high-performance heterogeneous electrocatalyst in carbon dioxide reduction , 2019, Nature Communications.

[35]  Yonggang Wang,et al.  Improved electrochemical performance of high voltage cathode Na3V2(PO4)2F3 for Na-ion batteries through potassium doping , 2019, Journal of Alloys and Compounds.

[36]  Ruizhi Yu,et al.  The novel P3-type layered Na0.65Mn0.75Ni0.25O2 oxides doped by non-metallic elements for high performance sodium-ion batteries , 2019, Chemical Engineering Journal.

[37]  Zhen-guo Wu,et al.  Insight into Preparation of Fe-Doped Na3V2(PO4)3@C from Aspects of Particle Morphology Design, Crystal Structure Modulation, and Carbon Graphitization Regulation. , 2019, ACS applied materials & interfaces.

[38]  Li-Li Zheng,et al.  Na3V2(PO4)3 with specially designed carbon framework as high performance cathode for sodium-ion batteries , 2019, Ceramics International.

[39]  Haihui Wang,et al.  Ration design of porous Mn-doped Na3V2(PO4)3 cathode for high rate and super stable sodium-ion batteries , 2019, Electrochimica Acta.

[40]  Ki Jae Kim,et al.  Polydopamine-derived N-doped carbon-wrapped Na3V2(PO4)3 cathode with superior rate capability and cycling stability for sodium-ion batteries , 2018, Nano Research.

[41]  Feng Wu,et al.  3D Electronic Channels Wrapped Large-Sized Na3 V2 (PO4 )3 as Flexible Electrode for Sodium-Ion Batteries. , 2018, Small.

[42]  N. Chen,et al.  Computational and experimental understanding of Al-doped Na3V2-xAlx(PO4)3 cathode material for sodium ion batteries: Electronic structure, ion dynamics and electrochemical properties , 2018, Electrochimica Acta.

[43]  M. Casas-Cabanas,et al.  Rate dependence of the reaction mechanism in olivine NaFePO4 Na‐ion cathode material , 2018 .

[44]  Guozhao Fang,et al.  Caging Na3V2(PO4)2F3 Microcubes in Cross‐Linked Graphene Enabling Ultrafast Sodium Storage and Long‐Term Cycling , 2018, Advanced science.

[45]  Yongchang Liu,et al.  Approaching the Downsizing Limit of Maricite NaFePO4 toward High‐Performance Cathode for Sodium‐Ion Batteries , 2018 .

[46]  Ting Liu,et al.  Recent advances in convolutional neural networks , 2015, Pattern Recognit..

[47]  Youlong Xu,et al.  High capacity-favorable tap density cathode material based on three-dimensional carbonous framework supported Na3V2(PO4)2F3 nanoparticles , 2018 .

[48]  Zonghai Chen,et al.  Exploring Highly Reversible 1.5-Electron Reactions (V3+/V4+/V5+) in Na3VCr(PO4)3 Cathode for Sodium-Ion Batteries. , 2017, ACS applied materials & interfaces.

[49]  Yi Cui,et al.  High-performance sodium–organic battery by realizing four-sodium storage in disodium rhodizonate , 2017 .

[50]  Feng Wu,et al.  Controllable synthesis of high-rate and long cycle-life Na 3 V 2 (PO 4 ) 3 for sodium-ion batteries , 2016 .

[51]  S. Dou,et al.  Tuned In Situ Growth of Nanolayered rGO on 3D Na3V2(PO4)3 Matrices: A Step toward Long Lasting, High Power Na‐Ion Batteries , 2016 .

[52]  Hui Li,et al.  Double-Nanocarbon Synergistically Modified Na3V2(PO4)3: An Advanced Cathode for High-Rate and Long-Life Sodium-Ion Batteries. , 2016, ACS applied materials & interfaces.

[53]  T. Shibata,et al.  Fast discharge process of layered cobalt oxides due to high Na+ diffusion , 2015, Scientific Reports.

[54]  A. Rai,et al.  Electrochemical properties of NaxCoO2 (x~0.71) cathode for rechargeable sodium-ion batteries , 2014 .

[55]  Yi Cui,et al.  A high-rate and long cycle life aqueous electrolyte battery for grid-scale energy storage , 2012, Nature Communications.

[56]  Yi Cui,et al.  Copper hexacyanoferrate battery electrodes with long cycle life and high power. , 2011, Nature communications.

[57]  Yi Cui,et al.  Nickel hexacyanoferrate nanoparticle electrodes for aqueous sodium and potassium ion batteries. , 2011, Nano letters.

[58]  C. Masquelier,et al.  α-Na3M2(PO4)3 (M = Ti, Fe): absolute cationic ordering in NASICON-type phases. , 2011, Journal of the American Chemical Society.

[59]  D Carlier,et al.  Electrochemical investigation of the P2–NaxCoO2 phase diagram. , 2011, Nature materials.

[60]  G. Ceder,et al.  Electrochemical Properties of Monoclinic NaNiO2 , 2011 .