Development and Diagnosis of a 1-kW Self-Sustainable Proton Exchange Membrane Fuel Cell System With a Methanol Reformer

[1]  L. Zhixiang,et al.  The development and performance analysis of all-China-made PEM fuel cell unit and 1 kW level fuel cell stack , 2012 .

[2]  L. F. Brown.  A comparative study of fuels for on-board hydrogen production for fuel-cell-powered automobiles , 2001 .

[3]  Hsin-Ping Chang,et al.  The design and cost analysis of a portable PEMFC UPS system , 2007 .

[4]  Ronghuan He,et al.  Integration of high temperature PEM fuel cells with a methanol reformer , 2005 .

[5]  M. Gençoglu,et al.  Design of a PEM fuel cell system for residential application , 2009 .

[6]  S. Kandlikar,et al.  A critical review of cooling techniques in proton exchange membrane fuel cell stacks , 2012 .

[7]  Eugenio Calò,et al.  Small stationary reformers for H2 production from hydrocarbons , 2010 .

[8]  Angela Psoma,et al.  Fuel cell systems for submarines: from the first idea to serial production , 2002 .

[9]  Takanobu Kosugi,et al.  Forecasting development of elemental technologies and effect of R&D investments for polymer electrolyte fuel cells in Japan , 2004 .

[10]  Antonio Vita,et al.  Performance of a 5 kWe fuel processor for polymer electrolyte fuel cells , 2008 .

[11]  Mario Zedda,et al.  An impedance-based predictive control strategy for the state-of-health of PEM fuel cell stacks , 2008 .

[12]  Daniel M. Kammen,et al.  Fuel cell system economics: comparing the costs of generating power with stationary and motor vehicle PEM fuel cell systems , 2004 .

[13]  Jenn-Jiang Hwang,et al.  Development of a lightweight fuel cell vehicle , 2005 .

[14]  Chiun-Hsun Chen,et al.  Development of an air bleeding technique and specific duration to improve the CO tolerance of proton-exchange membrane fuel cells , 2009 .

[15]  G. Gigliucci,et al.  Demonstration of a residential CHP system based on PEM fuel cells , 2004 .

[16]  P. Rodatz,et al.  Operational aspects of a large PEFC stack under practical conditions , 2004 .

[17]  Liyan Sun,et al.  The study on transient characteristic of proton exchange membrane fuel cell stack during dynamic loading , 2007 .

[18]  E. Gonzalez,et al.  Effect of membrane characteristics and humidification conditions on the impedance response of polymer electrolyte fuel cells , 2001 .

[19]  Volkmar M. Schmidt,et al.  Performance Data of a Proton Exchange Membrane Fuel Cell Using H 2 / CO as Fuel Gas , 1996 .

[20]  Sukhvinder P.S. Badwal,et al.  Design, assembly and operation of polymer electrolyte membrane fuel cell stacks to 1 kWe capacity , 2004 .

[21]  Donald R. Cahela,et al.  Uniformity analysis at MEA and stack Levels for a Nexa PEM fuel cell system , 2004 .

[22]  Ta-Jen Huang,et al.  Hydrogen production via steam reforming of methanol over Cu/(Ce,Gd)O2−x catalysts , 2010 .

[23]  K. Lee,et al.  Overview of the development of CO-tolerant anode electrocatalysts for proton-exchange membrane fuel cells , 2006 .

[24]  G. Olah.  Beyond oil and gas: the methanol economy. , 2006, Angewandte Chemie.

[25]  A. Mujumdar,et al.  Numerical evaluation of various thermal management strategies for polymer electrolyte fuel cell stac , 2011 .

[26]  R. Horng,et al.  Characteristics of hydrogen produced by partial oxidation and auto-thermal reforming in a small methanol reformer , 2006 .

[27]  Luciano Cardinali,et al.  Design and realization of a 300 W fuel cell generator on an electric bicycle , 2002 .

[28]  J. C. Schouten,et al.  Exergy analysis of an integrated fuel processor and fuel cell (FP–FC) system , 2006 .

[29]  Suman Roy Choudhury,et al.  Methanol reformer integrated phosphoric acid fuel cell (PAFC) based compact plant for field deployme , 2011 .

[30]  Gunther Kolb,et al.  Self-sustained operation and durability testing of a 300 W-class micro-structured LPG fuel processor , 2011 .

[31]  Ay Su,et al.  Design, fabrication and performance analysis of a 200 W PEM fuel cell short stack , 2007 .

[32]  Daisie D. Boettner,et al.  Proton exchange membrane (PEM) fuel cell-powered vehicle performance using direct-hydrogen fueling and on-board methanol reforming , 2004 .

[33]  B. Yi,et al.  A 75-kW methanol reforming fuel cell system , 2006 .

[34]  David J. Hart,et al.  Environmental benefits of transport and stationary fuel cells , 1998 .

[35]  B. Höhlein,et al.  Fuel cell drive system with hydrogen generation in test , 2000 .

[36]  Huiyong Huang,et al.  Reforming performance of a plasma-catalyst hybrid converter using low carbon fuels , 2009 .

[37]  Patrick Achard,et al.  Study of a small heat and power PEM fuel cell system generator , 2004 .

[38]  Chang-Soo Kim,et al.  Operating characteristics of an air-cooling PEMFC for portable applications , 2005 .

[39]  Biao Zhou,et al.  Diagnosis of PEM fuel cell stack dynamic behaviors , 2008 .

[40]  Jung-Ho Wee,et al.  Applications of proton exchange membrane fuel cell systems , 2007 .

[41]  Iain Staffell,et al.  Estimating future prices for stationary fuel cells with empirically derived experience curves , 2009 .

[42]  Thomas Aicher,et al.  A portable fuel processor for hydrogen production from ethanol in a 250 Wel fuel cell system , 2009 .

[43]  Shudong Wang,et al.  Modeling of a compact plate-fin reformer for methanol steam reforming in fuel cell systems , 2005 .

[44]  Jenn-Jiang Hwang,et al.  Development of fuel-cell-powered electric bicycle , 2004 .

[45]  W. Lai,et al.  Effects of temperature and humidity on the cell performance and resistance of a phosphoric acid doped polybenzimidazole fuel cell , 2010 .

[46]  S. G. Choi,et al.  Development of 1 kW class polymer electrolyte membrane fuel cell power generation system , 2002 .

[47]  Jinfeng Wu,et al.  An air-cooled proton exchange membrane fuel cell with combined oxidant and coolant flow , 2009 .

[48]  Félix Barreras,et al.  Design and development of the cooling system of a 2 kW nominal power open-cathode polymer electrolyte fuel cell stack , 2012 .

[49]  Yutaek Seo,et al.  Development of compact fuel processor for 2 kW class residential PEMFCs , 2006 .

[50]  Linda Barelli,et al.  An energetic–exergetic analysis of a residential CHP system based on PEM fuel cell , 2011 .

[51]  Huiyong Huang,et al.  Characteristics of hydrogen production by a plasma–catalyst hybrid converter with energy saving schemes under atmospheric pressure , 2008 .

[52]  Ay Su,et al.  Development of a small vehicular PEM fuel cell system , 2008 .

[53]  M. Dokupil,et al.  On-board fuel cell power supply for sailing yachts , 2005 .