Enhanced Photocurrent in BiFeO3 Materials by Coupling Temperature and Thermo-Phototronic Effects for Self-Powered Ultraviolet Photodetector System.

Ferroelectric materials can be utilized for fabricating photodetectors because of the photovoltaic effect. Enhancing the photovoltaic performance of ferroelectric materials is still a challenge. Here, a self-powered ultraviolet (UV) photodetector is designed based on the ferroelectric BiFeO3 (BFO) material, exhibiting a high current/voltage response to 365 nm light in heating/cooling states. The photovoltaic performance of the BFO-based device can be well modulated by applying different temperature variations, where the output current and voltage can be enhanced by 60 and 75% in heating and cooling states, respectively. The enhancement mechanism of the photocurrent is associated with both temperature effect and thermo-phototronic effect in the photovoltaic process. Moreover, a 4 × 4 matrix photodetector array has been designed for detecting the 365 nm light distribution in the cooling state by utilizing photovoltage signals. This study clarifies the role of the temperature effect and the thermo-phototronic effect in the photovoltaic process of the BFO material and provides a feasible route for pushing forward practical applications of self-powered UV photodetectors.

[1]  Pingping Yu,et al.  Scalable-Production, Self-Powered TiO2 Nanowell-Organic Hybrid UV Photodetectors with Tunable Performances. , 2016, ACS applied materials & interfaces.

[2]  P Shafer,et al.  Above-bandgap voltages from ferroelectric photovoltaic devices. , 2010, Nature nanotechnology.

[3]  M. Alexe,et al.  Tip-enhanced photovoltaic effects in bismuth ferrite , 2011 .

[4]  R. Bertacco,et al.  Selecting Steady and Transient Photocurrent Response in BaTiO3 Films , 2015, 1507.01492.

[5]  Huibin Lu,et al.  Switchable diode effect and ferroelectric resistive switching in epitaxial BiFeO3 thin films , 2011 .

[6]  Lu You,et al.  Non-volatile memory based on the ferroelectric photovoltaic effect , 2013, Nature Communications.

[7]  Bin Zhao,et al.  Large scale, highly efficient and self-powered UV photodetectors enabled by all-solid-state n-TiO2 nanowell/p-NiO mesoporous nanosheet heterojunctions , 2016 .

[8]  Y. Bando,et al.  An Efficient Way to Assemble ZnS Nanobelts as Ultraviolet‐Light Sensors with Enhanced Photocurrent and Stability , 2010 .

[9]  Linfeng Hu,et al.  General Fabrication of Monolayer SnO2 Nanonets for High‐Performance Ultraviolet Photodetectors , 2012 .

[10]  Guifu Zou,et al.  Enlarging photovoltaic effect: combination of classic photoelectric and ferroelectric photovoltaic effects , 2013, Scientific Reports.

[11]  Marin Alexe,et al.  Role of domain walls in the abnormal photovoltaic effect in BiFeO3 , 2013, Nature Communications.

[12]  E. Guo,et al.  High-sensitive switchable photodetector based on BiFeO3 film with in-plane polarization , 2015 .

[13]  Kewei Zhang,et al.  Thermo‐Phototronic Effect Enhanced InP/ZnO Nanorod Heterojunction Solar Cells for Self‐Powered Wearable Electronics , 2017 .

[14]  Yuanhua Lin,et al.  Controlled Fabrication of BiFeO3 Uniform Microcrystals and Their Magnetic and Photocatalytic Behaviors , 2010 .

[15]  Yiping Guo,et al.  Evidence for oxygen vacancy or ferroelectric polarization induced switchable diode and photovoltaic effects in BiFeO3 based thin films , 2013, Nanotechnology.

[16]  M. Guennou,et al.  Photovoltaics with Ferroelectrics: Current Status and Beyond , 2016, Advanced materials.

[17]  C. Soci,et al.  ZnO nanowire UV photodetectors with high internal gain. , 2007, Nano letters.

[18]  H. Yi,et al.  Mechanism of the Switchable Photovoltaic Effect in Ferroelectric BiFeO3 , 2011, Advanced materials.

[19]  Zhong Lin Wang,et al.  Enhancing sensitivity of a single ZnO micro-/nanowire photodetector by piezo-phototronic effect. , 2010, ACS nano.

[20]  F. Zhuge,et al.  Effect of top electrodes on photovoltaic properties of polycrystalline BiFeO3 based thin film capacitors , 2011, Nanotechnology.

[21]  Jinsong Huang,et al.  Arising applications of ferroelectric materials in photovoltaic devices , 2014 .

[22]  Sang Jin Park,et al.  Flexible and Wavelength-Selective MoS2 Phototransistors with Monolithically Integrated Transmission Color Filters , 2017, Scientific Reports.

[23]  N. Marzari,et al.  Ultraviolet Photodetectors Based on Anodic TiO2 Nanotube Arrays , 2010 .