Effect of TiO2 nanoparticles on fouling mitigation of ultrafiltration membranes for activated sludge filtration

Abstract Membrane bioreactors (MBRs) have been widely used as advanced wastewater treatment process in recent years. However, MBR system has a membrane fouling problem, which makes the system less competitive. Thus there have been great efforts for fouling mitigation. In this study, two types of TiO 2 immobilized ultrafiltration membranes (TiO 2 entrapped and deposited membranes) were prepared and applied to activated sludge filtration in order to evaluate their fouling mitigation effect. Membrane performances were changed by addition of TiO 2 nanoparticles to the casting solution. TiO 2 entrapped membrane showed lower flux decline compared to that of neat polymeric membrane. Fouling mitigation effect increased with nanoparticle content, but it reached limit content above which fouling mitigation did not increase. Regardless of polymeric materials, membrane fouling was mitigated by TiO 2 immobilization. TiO 2 deposited membrane showed greater fouling mitigation effect compared to that of TiO 2 entrapped membrane, since larger amount of nanoparticle was located on membrane surface. It can be concluded that TiO 2 immobilized membranes are simple and powerful alternative for fouling mitigation in MBR application.

[1]  Marcel Mulder,et al.  Basic Principles of Membrane Technology , 1991 .

[2]  Tai Hyun Park,et al.  Design of TiO2 nanoparticle self-assembled aromatic polyamide thin-film-composite (TFC) membrane as an approach to solve biofouling problem , 2003 .

[3]  W. Xi,et al.  Separation of titanium dioxide from photocatalytically treated water by cross-flow microfiltration. , 2001, Water research.

[4]  S. Kwak,et al.  Hybrid organic/inorganic reverse osmosis (RO) membrane for bactericidal anti-fouling. 1. Preparation and characterization of TiO2 nanoparticle self-assembled aromatic polyamide thin-film-composite (TFC) membrane. , 2001, Environmental science & technology.

[5]  E. Drioli,et al.  Study on a photocatalytic membrane reactor for water purification , 2000 .

[6]  Hang-Sik Shin,et al.  Sludge characteristics and their contribution to microfiltration in submerged membrane bioreactors , 2003 .

[7]  Jungwon Choi,et al.  The behavior of membrane fouling initiation on the crossflow membrane bioreactor system , 2002 .

[8]  Sungpyo Hong,et al.  Fouling control in activated sludge submerged hollow fiber membrane bioreactors , 2002 .

[9]  Alain Grasmick,et al.  Hydrodynamic control of bioparticle deposition in a MBR applied to wastewater treatment , 1998 .

[10]  I Kim,et al.  Preparation and characterization of integrally skinned uncharged polyetherimide asymmetric nanofiltration membrane , 2001 .

[11]  Z. Baolong.  Preparation and characterization of nanocrystal grain TiO2 porous microspheres , 2003 .

[12]  Enrico Drioli,et al.  Studies on various reactor configurations for coupling photocatalysis and membrane processes in water purification , 2002 .

[13]  Ho-In Lee,et al.  Use of Ultrafiltration Membranes for the Separation of TiO2 Photocatalysts in Drinking Water Treatment , 2001 .

[14]  In-Soung Chang,et al.  Membrane filtration characteristics in membrane-coupled activated sludge system -- the effect of physiological states of activated sludge on membrane fouling , 1998 .

[15]  Enrico Drioli,et al.  Photocatalytic membrane reactors for degradation of organic pollutants in water , 2001 .

[16]  A. Grasmick,et al.  Influence of hydrodynamics on fouling velocity in a recirculated MBR for wastewater treatment , 1999 .