Hovering of MAV by using magnetic adhesion and winch mechanisms

We propose a method by which a micro air vehicle (MAV) can hover without propulsion power. In this paper, we describe the design of a magnetic adhesion mechanism and a winch mechanism for an MAV that is used to perform search operations inside buildings. An MAV equipped with these mechanisms can adhere to an iron ceiling and search for a long time from an appropriate position. We designed a magnetic adhesion mechanism with an adhesion force of over 20 N. The magnetic adhesion mechanism comprises a magnet, dual coil springs, and a switching mechanism. Using models of MAV and the adhesion mechanism, we determined the parameters of the mechanism. The magnetic adhesion mechanism can be detached easily by a force less than the magnetic adhesion force. The winch mechanism comprises a structure to retrieve the adhesion mechanism, a strong, lightweight tether and a servo-motor that produces enough torque to lift the MAV by the tether. We confirmed that the MAV can hover without propulsion power by using these mechanisms.

[1]  Roy Kornbluh,et al.  Electroadhesive robots—wall climbing robots enabled by a novel, robust, and electrically controllable adhesion technology , 2008, 2008 IEEE International Conference on Robotics and Automation.

[2]  Lijun Wu,et al.  Design of a sliding wall climbing robot with a novel negative adsorption device , 2011, 2011 8th International Conference on Ubiquitous Robots and Ambient Intelligence (URAI).

[3]  Metin Sitti,et al.  Waalbot: An Agile Small-Scale Wall Climbing Robot Utilizing Pressure Sensitive Adhesives , 2006, 2006 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[4]  Kan Yoneda,et al.  Deformation compensation for continuous force control of a wall climbing quadruped with reduced-DOF , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[5]  Metin Sitti,et al.  Geckobot: a gecko inspired climbing robot using elastomer adhesives , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[6]  Shigeo Hirose.  A new design criterion in robotic mechanism (prevention of negative power consumption) , 1993, Proceedings of 1993 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS '93).

[7]  Kellar Autumn,et al.  Properties, Principles, and Parameters of the Gecko Adhesive System , 2006 .

[8]  Carlo Menon,et al.  Characterization of electro-adhesives for robotic applications , 2011, 2011 IEEE International Conference on Robotics and Biomimetics.

[9]  Aaron Parness,et al.  Gravity-independent mobility and drilling on natural rock using microspines , 2012, 2012 IEEE International Conference on Robotics and Automation.

[10]  Peisun Ma,et al.  A wall-climbing robot for labelling scale of oil tank's volume , 2002, Robotica.

[11]  Mark R. Cutkosky,et al.  Whole body adhesion: hierarchical, directional and distributed control of adhesive forces for a climbing robot , 2007, Proceedings 2007 IEEE International Conference on Robotics and Automation.

[12]  Kazuya Yoshida,et al.  Collaborative mapping of an earthquake‐damaged building via ground and aerial robots , 2012, J. Field Robotics.

[13]  Zhenmin Tang,et al.  A bat-like switched flying and adhesive robot , 2012, 2012 IEEE International Conference on Cyber Technology in Automation, Control, and Intelligent Systems (CYBER).

[14]  Dario Floreano,et al.  Energy management for indoor hovering robots , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[15]  William R. Provancher,et al.  ROCR: Dynamic vertical wall climbing with a pendular two-link mass-shifting robot , 2008, 2008 IEEE International Conference on Robotics and Automation.