Optimal design of a heat exchanger for automotive thermoelectric generator systems applied to a passenger car
暂无分享,去创建一个
Ruochen Wang | Yuying Yan | D. Luo | Ziming Cheng | Dongxu Ji | Ying Li | Zihao Wu | Xu Yang
[1] Ruochen Wang,et al. A hybrid transient CFD-thermoelectric numerical model for automobile thermoelectric generator systems , 2023, Applied Energy.
[2] Yuying Yan,et al. Thermal and electrical contact resistances of thermoelectric generator: Experimental study and artificial neural network modelling , 2023, Applied Thermal Engineering.
[3] Ruochen Wang,et al. Development of two transient models for predicting dynamic response characteristics of an automobile thermoelectric generator system , 2022, Applied Thermal Engineering.
[4] Lulu Zhang,et al. Recent advances in modeling and simulation of thermoelectric power generation , 2022, Energy Conversion and Management.
[5] Yulong Zhao,et al. Numerical investigation of an exhaust thermoelectric generator with a perforated plate , 2022, Energy.
[6] Yulong Zhao,et al. Experimental study of thermoelectric generator with different numbers of modules for waste heat recovery , 2022, Applied Energy.
[7] Xun Liu,et al. Thermal performance of battery thermal management system using fins to enhance the combination of thermoelectric Cooler and phase change Material , 2022, Applied Energy.
[8] R. Stobart,et al. Performance comparison of a thermoelectric generator applied in conventional vehicles and extended-range electric vehicles , 2022, Energy Conversion and Management.
[9] Yuying Yan,et al. Transient numerical modelling of a thermoelectric generator system used for automotive exhaust waste heat recovery , 2021 .
[10] W. Yan,et al. A novel super-cooling enhancement method for a two-stage thermoelectric cooler using integrated triangular-square current pulses , 2020 .
[11] W. Yan,et al. Thermal management of a flexible controlled thermoelectric energy conversion-utilization system using a multi-objective optimization , 2020 .
[12] Luo Ding,et al. Performance optimization of a converging thermoelectric generator system via multiphysics simulations , 2020 .
[13] Hamed Sadighi Dizaji,et al. Performance and profit analysis of thermoelectric power generators mounted on channels with different cross-sectional shapes , 2020 .
[14] Luo Ding,et al. Parametric study of a thermoelectric module used for both power generation and cooling , 2020 .
[15] Yu Li Lin,et al. A computational fluid dynamics (CFD) approach of thermoelectric generator (TEG) for power generation , 2020 .
[16] F. Brito,et al. Compact automotive thermoelectric generator with embedded heat pipes for thermal control , 2020 .
[17] Wei-Lung Yu,et al. A novel optimization method for thermoelectric module used in waste heat recovery , 2020 .
[18] Wei-Lung Yu,et al. Comparison and parametric study of two theoretical modeling approaches based on an air-to-water thermoelectric generator system , 2019, Journal of Power Sources.
[19] Zu-Guo Shen,et al. Automotive exhaust thermoelectric generators: Current status, challenges and future prospects , 2019, Energy Conversion and Management.
[20] C. Su,et al. Thermal and acoustic performance of an integrated automotive thermoelectric generation system , 2019, Applied Thermal Engineering.
[21] Zhiheng Xu,et al. Preparation and optimization of miniaturized radioisotope thermoelectric generator based on concentric filament architecture , 2018, Journal of Power Sources.
[22] G. Shu,et al. Optimization of thermoelectric generator (TEG) integrated with three-way catalytic converter (TWC) for harvesting engine’s exhaust waste heat , 2018, Applied Thermal Engineering.
[23] Pablo Fernández-Yáñez,et al. Thermal analysis of a thermoelectric generator for light-duty diesel engines , 2018, Applied Energy.
[24] Roop L. Mahajan,et al. Evaluation of metal foam based thermoelectric generators for automobile waste heat recovery , 2018, International Journal of Heat and Mass Transfer.
[25] Yanliang Zhang. Thermoelectric Advances to Capture Waste Heat in Automobiles , 2018, ACS Energy Letters.
[26] C. Su,et al. Performance evaluation of an automotive thermoelectric generator with inserted fins or dimpled-surface hot heat exchanger , 2018 .
[27] Yongjia Wu,et al. Thermo-element geometry optimization for high thermoelectric efficiency , 2018 .
[28] Taeyoung Kim,et al. Energy harvesting performance of hexagonal shaped thermoelectric generator for passenger vehicle applications: An experimental approach , 2018 .
[29] Shixue Wang,et al. Experimental study of the effects of the thermal contact resistance on the performance of thermoelectric generator , 2018 .
[30] Weiling Luan,et al. Performance enhancement of heat pipes assisted thermoelectric generator for automobile exhaust heat recovery , 2018 .
[31] H. Nee,et al. Electrical Power Conditioning System for Thermoelectric Waste Heat Recovery in Commercial Vehicles , 2018, IEEE Transactions on Transportation Electrification.
[32] Zhijia Yang,et al. A dynamic model for thermoelectric generator applied to vehicle waste heat recovery , 2018 .
[33] Ting Ma,et al. Experimental investigation on thermoelectric generator with non-uniform hot-side heat exchanger for waste heat recovery , 2017 .
[34] Sónia Vale,et al. Parametric study of a thermoelectric generator system for exhaust gas energy recovery in diesel road freight transportation , 2017 .
[35] Jie Zhu,et al. A comprehensive review of thermoelectric technology: materials, applications, modelling and performance improvement , 2016 .
[36] Jinyue Yan,et al. Performance enhancement of thermoelectric waste heat recovery system by using metal foam inserts , 2016 .
[37] Yanliang Zhang,et al. Design and Optimization of Automotive Thermoelectric Generators for Maximum Fuel Efficiency Improvement , 2016 .
[38] Andrés Agudelo,et al. Potential for exhaust gas energy recovery in a diesel passenger car under European driving cycle , 2016 .
[39] Y. D. Deng,et al. Simulation and Optimization of the Heat Exchanger for Automotive Exhaust-Based Thermoelectric Generators , 2016, Journal of Electronic Materials.
[40] Shengqiang Bai,et al. Numerical and experimental analysis for exhaust heat exchangers in automobile thermoelectric generators , 2014 .
[41] Doug Crane,et al. TEG On-Vehicle Performance and Model Validation and What It Means for Further TEG Development , 2013, Journal of Electronic Materials.
[42] Gequn Shu,et al. Simulation and thermodynamic analysis of a bottoming Organic Rankine Cycle (ORC) of diesel engine (DE) , 2013 .
[43] Wei-Hsin Chen,et al. Experimental study on thermoelectric modules for power generation at various operating conditions , 2012 .
[44] M. A. Karri,et al. Exhaust energy conversion by thermoelectric generator: Two case studies , 2011 .
[45] K. B. Wipke,et al. ADVISOR 2.1: a user-friendly advanced powertrain simulation using a combined backward/forward approach , 1999 .
[46] Ruochen Wang,et al. Experimental Test and Estimation of the Equivalent Thermoelectric Properties for a Thermoelectric Module , 2021 .
[47] F. Brito,et al. Efficiency improvement of vehicles using temperature controlled exhaust thermoelectric generators , 2020 .
[48] Pedro J. Coelho,et al. Optimization of a thermoelectric generator for heavy-duty vehicles , 2019, Energy Conversion and Management.