On implementation of a nonlinear four node shell finite element for thin multilayered elastic shells

A simple non-linear stress resultant four node shell finite element is presented. The underlying shell theory is developed from the three dimensional continuum theory via standard assumptions on the displacement field. A model for thin shells is obtained by approximating terms describing the shell geometry. In this work the rotation of the shell director is parameterized by the two Euler angles, although other approaches can be easily accomodated. A procedure is provided to extend the presented approach by including the through-thickness variable material properties. These may include a general non-linear elastic material with varied degree of orthotropy, which is typical for fibre reinforced composites. Thus a simple and efficient model suitable for analysis of multilayered composite shells is attained. Shell kinematics is consistently linearized, leading to the Newton-Raphson numerical procedure, which preserves quadratic rate of asymptotic convergence. A range of linear and non-linear tests is provided and compared with available solutions to illustrate the approach.

[1]  Yavuz Başar,et al.  Theory and Finite-Element Formulation for Shell Structures Undergoing Finite Rotations , 1990 .

[2]  J. C. Simo,et al.  On a stress resultant geometrically exact shell model. Part II: the linear theory; computational aspects , 1989 .

[3]  J. C. Simo,et al.  On stress resultant geometrically exact shell model. Part I: formulation and optimal parametrization , 1989 .

[4]  Carlo Sansour,et al.  An exact finite rotation shell theory, its mixed variational formulation and its finite element implementation , 1992 .

[5]  Rakesh K. Kapania,et al.  Geometrically Nonlinear Finite Element Analysis of Imperfect Laminated Shells , 1986 .

[6]  Peter Wriggers,et al.  A general procedure for the direct computation of turning and bifurcation points , 1990 .

[7]  Peter Wriggers,et al.  Thin shells with finite rotations formulated in biot stresses : theory and finite element formulation , 1993 .

[8]  E. Ramm,et al.  Shell theory versus degeneration—a comparison in large rotation finite element analysis , 1992 .

[9]  J. C. Simo,et al.  On the Variational Foundations of Assumed Strain Methods , 1986 .

[10]  J. C. Simo,et al.  On a stress resultant geometrically exact shell model. Part III: computational aspects of the nonlinear theory , 1990 .

[11]  H. Parisch,et al.  An investigation of a finite rotation four node assumed strain shell element , 1991 .

[12]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[13]  Ekkehard Ramm,et al.  EAS‐elements for two‐dimensional, three‐dimensional, plate and shell structures and their equivalence to HR‐elements , 1993 .

[14]  B. Brank,et al.  A Nonlinear Four Node Shell Element with Explicit Integration and Elementary Rotations , 1993 .

[15]  K. Bathe,et al.  A four‐node plate bending element based on Mindlin/Reissner plate theory and a mixed interpolation , 1985 .

[16]  Cv Clemens Verhoosel,et al.  Non-Linear Finite Element Analysis of Solids and Structures , 1991 .

[17]  Gottfried Laschet,et al.  Postbuckling finite element analysis of composite panels , 1990 .

[18]  K. Bathe,et al.  A continuum mechanics based four‐node shell element for general non‐linear analysis , 1984 .

[19]  T. Pian,et al.  Rational approach for assumed stress finite elements , 1984 .

[20]  K. Schweizerhof,et al.  Interpolation of curved shell geometries by low order finite elements—errors and modifications , 1993 .

[21]  F. L. Matthews,et al.  Composite Materials : Engineering and Science , 1993 .

[22]  Ekkehard Ramm,et al.  An assessment of assumed strain methods in finite rotation shell analysis , 1989 .