Energy Capture from Thermolytic Solutions in Microbial Reverse-Electrodialysis Cells

Waste Not The organic matter in wastewater is a potentially vast and sustainable energy source; however, most wastewater treatment plants consume energy. Cusick et al. (p. 1474, published online 1 March) combined a microbial fuel cell with a reverse-electrodialysis system to boost the voltage output and the power density over a simple microbial fuel cell. The use of ammonium bicarbonate as a fuel for reverse electrodialysis while microorganisms simultaneously turn organic matter into electricity not only allows for the capturing of waste heat, but could eventually produce enough energy to offset the energy used in conventional wastewater treatment systems. Thermally induced salt gradients could augment the electricity generated by microbial fuel cells from wastewater. Reverse electrodialysis allows for the capture of energy from salinity gradients between salt and fresh waters, but potential applications are currently limited to coastal areas and the need for a large number of membrane pairs. Using salt solutions that could be continuously regenerated with waste heat (≥40°C) and conventional technologies would allow much wider applications of salinity-gradient power production. We used reverse electrodialysis ion-exchange membrane stacks in microbial reverse-electrodialysis cells to efficiently capture salinity-gradient energy from ammonium bicarbonate salt solutions. The maximum power density using acetate reached 5.6 watts per square meter of cathode surface area, which was five times that produced without the dialysis stack, and 3.0 ± 0.05 watts per square meter with domestic wastewater. Maximum energy recovery with acetate reached 30 ± 0.5%.