Effect of fiber diameter on tensile properties of electrospun poly(ɛ-caprolactone)

Abstract The tensile properties of electrospun fibers have not been widely investigated due to the difficulties in handling nanofibers and measuring low load for deformation. In this study, the effect of dimensional confinement on free standing biodegradable poly(ɛ-caprolactone) (PCL) is investigated using electrospinning-enabled techniques and a nanoforce tensile tester. The structural properties such as crystallinity and molecular orientation of the spun fibers are examined using wide angle X-ray diffraction (WAXD). The degree of crystallinity and molecular orientation of fibers are enhanced when the diameter of spun fibers is reduced, resulting in improved mechanical strength and stiffness. It is evident that PCL fibers with decreasing fiber diameter exhibit an abrupt shift in tensile performance in comparison to those derived from non-spun systems. The abrupt shift in tensile strength and stiffness of electrospun PCL fibers occurs at around 700 nm in diameter and illustrates the importance of studying the mechanical behavior of the nanofibers, for the first time, systematically with the aid from electrospinning techniques. This shift cannot be otherwise explained by a noticeable change in T g , and the gradual increase in crystallinity and molecular orientation.

[1]  Irving Brazinsky,et al.  The dry spinning process: Comparison of theory with experiment , 1975 .

[2]  A. Mikos,et al.  Electrospun poly(epsilon-caprolactone) microfiber and multilayer nanofiber/microfiber scaffolds: characterization of scaffolds and measurement of cellular infiltration. , 2006, Biomacromolecules.

[3]  K. Ngai Mobility in thin polymer films ranging from local segmental motion, Rouse modes to whole chain motion: A coupling model consideration , 2002, The European physical journal. E, Soft matter.

[4]  K. Ngai Interpreting the dynamics of nano‐confined glass‐formers and thin polymer films: Importance of starting from a viable theory for the bulk , 2006 .

[5]  Oleg Gendelman,et al.  Effect of supramolecular structure on polymer nanofibre elasticity. , 2007, Nature nanotechnology.

[6]  Y. Cohen,et al.  Tensile deformation of electrospun nylon‐6,6 nanofibers , 2006 .

[7]  John D. Currey,et al.  Mechanical properties of mother of pearl in tension , 1977, Proceedings of the Royal Society of London. Series B. Biological Sciences.

[8]  Darrell H. Reneker,et al.  Electrospinning process and applications of electrospun fibers , 1995 .

[9]  K. Kendall The impossibility of comminuting small particles by compression , 1978, Nature.

[10]  A. A. Griffith The Phenomena of Rupture and Flow in Solids , 1921 .

[11]  Xue-chao Hu,et al.  Structure of silk fibroin fibers made by an electrospinning process from a silk fibroin aqueous solution , 2006 .

[12]  Studies on confined crystallization behavior of polycaprolactone thin films , 2007 .

[13]  Yu Wang,et al.  Substrate-induced strain effect in La[sub 0.875]Ba[sub 0.125]MnO₃ thin films grown on ferroelectric single-crystal substrates , 2008 .

[14]  Y. Mai,et al.  The essential fracture work concept for toughness measurement of ductile polymers , 1996 .

[15]  R. Farris,et al.  Fabrication of aligned and molecularly oriented electrospun polyacrylonitrile nanofibers and the mechanical behavior of their twisted yarns , 2004 .

[16]  D. Reneker,et al.  Nanometre diameter fibres of polymer, produced by electrospinning , 1996 .

[17]  K. Katti,et al.  Why is nacre so tough and strong , 2006 .

[18]  C. Lim,et al.  Mechanical properties of single electrospun drug-encapsulated nanofibres , 2006, Nanotechnology.

[19]  W. Oh,et al.  Grazing-incidence small-angle X-ray scattering studies on templating nanopores in networked polymer thin films with a multi-armed porogen , 2007 .

[20]  Zhigang Suo,et al.  Model for the robust mechanical behavior of nacre , 2001 .

[21]  R. Marchessault,et al.  Crystal structure of poly-ε-caprolactone , 1970 .

[22]  James L. White,et al.  Fundamental analysis of the dynamics, mass transfer, and coagulation in wet spinning of fibers , 1981 .

[23]  Julian Vincent,et al.  The mechanical properties of biological materials , 1979 .

[24]  R O Ritchie,et al.  Mechanistic aspects of fracture and R-curve behavior in human cortical bone. , 2005, Biomaterials.