Energy Efficiency Improvement via Bus Voltage Control of Inverter for Electric Vehicles
暂无分享,去创建一个
[1] Alireza Khaligh,et al. Optimization of Sizing and Battery Cycle Life in Battery/Ultracapacitor Hybrid Energy Storage Systems for Electric Vehicle Applications , 2014, IEEE Transactions on Industrial Informatics.
[2] Stefan Knoll,et al. Structured Development and Evaluation of Electric/Electronic-Architectures of the Electric Power Train , 2013, 2013 IEEE Vehicle Power and Propulsion Conference (VPPC).
[3] Jorge O. Estima,et al. Thermal evaluation of different drive train topologies for electric/hybrid vehicles , 2014, 2014 International Conference on Electrical Machines (ICEM).
[4] Xi Fang,et al. 3. Full Four-channel 6.3-gb/s 60-ghz Cmos Transceiver with Low-power Analog and Digital Baseband Circuitry 7. Smart Grid — the New and Improved Power Grid: a Survey , 2022 .
[5] Tomonobu Senjyu,et al. An accurate modeling for permanent magnet synchronous motor drives , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).
[6] Stefan Ulbrich,et al. Driving cycle-based design optimization of interior permanent magnet synchronous motor drives for electric vehicle application , 2014, 2014 International Symposium on Power Electronics, Electrical Drives, Automation and Motion.
[7] Sheldon S. Williamson,et al. Power-Electronics-Based Solutions for Plug-in Hybrid Electric Vehicle Energy Storage and Management Systems , 2010, IEEE Transactions on Industrial Electronics.
[8] Andrea Cavagnino,et al. Iron Loss Prediction With PWM Supply Using Low- and High-Frequency Measurements: Analysis and Results Comparison , 2008, IEEE Transactions on Industrial Electronics.
[9] Ranjan Maheshwari,et al. Performance analysis of hybrid energy storage system using hybrid control algorithm with BLDC motor driving a vehicle , 2010, 2010 Joint International Conference on Power Electronics, Drives and Energy Systems & 2010 Power India.
[10] Babak Nahid-Mobarakeh,et al. Optimal Design of Permanent Magnet Motors to Improve Field-Weakening Performances in Variable Speed Drives , 2012, IEEE Transactions on Industrial Electronics.
[11] Joris Jaguemont,et al. Characterization and Modeling of a Hybrid-Electric-Vehicle Lithium-Ion Battery Pack at Low Temperatures , 2016, IEEE Transactions on Vehicular Technology.
[12] Andrew Cruden,et al. Optimizing for Efficiency or Battery Life in a Battery/Supercapacitor Electric Vehicle , 2012, IEEE Transactions on Vehicular Technology.
[13] Ebrahim Arefi Moghadam,et al. Loss Minimization Control of Permanent Magnet Synchronous Motor Drives , 2008 .
[14] Soonwoo Kwon,et al. Loss Minimizing Control of PMSM with the Use of Polynomial Approximations , 2008, 2008 IEEE Industry Applications Society Annual Meeting.
[15] Alireza Khaligh,et al. Influence of Battery/Ultracapacitor Energy-Storage Sizing on Battery Lifetime in a Fuel Cell Hybrid Electric Vehicle , 2009, IEEE Transactions on Vehicular Technology.
[16] Sheldon S. Williamson. Electric and Plug-in Hybrid Electric Vehicle Drive Train Topologies , 2013 .
[17] Hui Zhang,et al. Vehicle Lateral Dynamics Control Through AFS/DYC and Robust Gain-Scheduling Approach , 2016, IEEE Transactions on Vehicular Technology.
[18] Zi-Qiang Zhu,et al. Electrical Machines and Drives for Electric, Hybrid, and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.
[19] Xiaosong Hu,et al. Energy efficiency analysis of a series plug-in hybrid electric bus with different energy management strategies and battery sizes , 2013 .
[20] M. Bertoluzzo,et al. Role and Technology of the Power Split Apparatus in Hybrid Electric Vehicles , 2007, IECON 2007 - 33rd Annual Conference of the IEEE Industrial Electronics Society.
[21] Douglas J. Nelson,et al. Energy Management Power Converters in Hybrid Electric and Fuel Cell Vehicles , 2007, Proceedings of the IEEE.
[22] Xiaosong Hu,et al. Longevity-conscious dimensioning and power management of the hybrid energy storage system in a fuel cell hybrid electric bus , 2015 .
[23] David G. Dorrell,et al. Analysis and Design Techniques Applied to Hybrid Vehicle Drive Machines—Assessment of Alternative IPM and Induction Motor Topologies , 2012, IEEE Transactions on Industrial Electronics.
[24] P. R. Thakura,et al. Role of high power semiconductor devices in hybrid electric vehicles , 2011, India International Conference on Power Electronics 2010 (IICPE2010).
[25] J. Z. Jiang,et al. A Permanent-Magnet Hybrid Brushless Integrated Starter–Generator for Hybrid Electric Vehicles , 2010, IEEE Transactions on Industrial Electronics.
[26] F. Fernandez-Bernal,et al. Determination of parameters in interior permanent magnet synchronous motors with iron losses without torque measurement , 2000, Conference Record of the 2000 IEEE Industry Applications Conference. Thirty-Fifth IAS Annual Meeting and World Conference on Industrial Applications of Electrical Energy (Cat. No.00CH37129).
[27] Longya Xu,et al. Alternative Energy Vehicles Drive System: Control, Flux and Torque Estimation, and Efficiency Optimization , 2011, IEEE Transactions on Vehicular Technology.
[28] Fred C. Lee,et al. Efficiency considerations of load side soft-switching inverters for electric vehicle applications , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).
[29] Ching Chuen Chan,et al. Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles , 2008, IEEE Transactions on Industrial Electronics.
[30] Yan Chen,et al. Design and Evaluation on Electric Differentials for Overactuated Electric Ground Vehicles With Four Independent In-Wheel Motors , 2012, IEEE Transactions on Vehicular Technology.
[31] Xiaosong Hu,et al. Comparison of Three Electrochemical Energy Buffers Applied to a Hybrid Bus Powertrain With Simultaneous Optimal Sizing and Energy Management , 2014, IEEE Transactions on Intelligent Transportation Systems.
[32] Yung-Ruei Chang,et al. High-Efficiency Power Conversion System for Kilowatt-Level Stand-Alone Generation Unit With Low Input Voltage , 2008, IEEE Transactions on Industrial Electronics.
[33] Rongrong Wang,et al. Linear Parameter-Varying Controller Design for Four-Wheel Independently Actuated Electric Ground Vehicles With Active Steering Systems , 2014, IEEE Transactions on Control Systems Technology.
[34] Friedrich Wilhelm Fuchs,et al. General Analysis and Design Guideline for a Battery Buffer System With DC/DC Converter and EDLC for Electric Vehicles and its Influence on Efficiency , 2015, IEEE Transactions on Power Electronics.