High-flux reverse osmosis membranes incorporated with hydrophilic additives for brackish water desalination

Abstract Novel high-flux reverse osmosis membranes with hydrophilic additives were synthesized and characterized under brackish water desalination conditions. Four selected hydrophilic additives, o-aminobenzoic acid-triethylamine salt, m-aminobenzoic acid-triethylamine salt, 2-(2-hydroxyethyl) pyridine, and 4-(2-hydroxyethyl) morpholine, were added into m-phenylenediamine (MPD) solution to react with trimesoyl chloride (TMC) during the interfacial polymerization between MPD and TMC. The effects of different concentrations for each hydrophilic additive were evaluated using brackish water desalination tests with 2000 ppm NaCl solution at 225 psi and 25 °C. After the additive concentration was optimized, the synthesized membranes were post-treated to further improve the water flux using aqueous solutions containing glycerol, sodium lauryl sulfate, and camphorsulfonic acid-triethylamine salt. The resulting membrane showed a flux of 52.6 gal/ft2/day and a salt rejection of about 98.8% or greater. This membrane outperformed the other membranes evaluated, and it also exhibited a good stability in terms of water flux and salt rejection during the entire period of a 30-day test.

[1]  M. Elimelech,et al.  The Future of Seawater Desalination: Energy, Technology, and the Environment , 2011, Science.

[2]  R. J. Petersen,et al.  Composite reverse osmosis and nanofiltration membranes , 1993 .

[3]  Huanting Wang,et al.  Recent developments in reverse osmosis desalination membranes , 2010 .

[4]  R. Rangarajan,et al.  Interfacially synthesized thin film composite RO membranes for seawater desalination , 1997 .

[5]  Suobo Zhang,et al.  Novel thin-film composite membranes with improved water flux from sulfonated cardo poly(arylene ether sulfone) bearing pendant amino groups , 2008 .

[6]  T. Arnot,et al.  A review of reverse osmosis membrane materials for desalinationDevelopment to date and future poten , 2011 .

[7]  Meihong Liu,et al.  Performance enhancement in interfacially synthesized thin-film composite polyamide-urethane reverse osmosis membrane for seawater desalination , 2009 .

[8]  James S. Taylor,et al.  Surface characterization and performance evaluation of commercial fouling resistant low-pressure RO membranes , 2007 .

[9]  G. Snijders,et al.  Characterization of a new reverse osmosis composite membrane for industrial application , 1988 .

[10]  Mike Jenkins,et al.  Operational experience with a new fouling resistant reverse osmosis membrane , 1998 .

[11]  Benny D. Freeman,et al.  Reverse osmosis desalination: water sources, technology, and today's challenges. , 2009, Water research.

[12]  J. Koo.  ESCA characterization of Chlorine-Damaged Polyamide Reverse Osmosis Membrane , 1986 .

[13]  P. Sehn,et al.  Four years field experience with fouling resistant reverse osmosis membranes , 2000 .

[14]  Bart Van der Bruggen,et al.  Distillation vs. membrane filtration: overview of process evolutions in seawater desalination , 2002 .

[15]  Norman N. Li,et al.  Flux Enhancement in TFC RO Membranes , 2001 .

[16]  Lei Li,et al.  Polyamide thin film composite membranes prepared from isomeric biphenyl tetraacyl chloride and m-phenylenediamine , 2008 .

[17]  Pio A. Aguirre,et al.  Optimization of hybrid desalination processes including multi stage flash and reverse osmosis systems , 2005 .

[18]  Erineos Koutsakos,et al.  Long term experience with membrane performance at the Larnaca desalination plant , 2008 .

[19]  Mark C. Porter,et al.  Handbook of Industrial Membrane Technology , 2007 .