Quantifying mesh resistance to opening of netting panels: experimental method, regression models, and parameter estimation strategies

The increasedmesh resistance to openingof netting panelsmanufacturedwith thick and stiff twines has a notable impact in the structural response and selective performance of the fishing gears. The only available method to quantify the mesh resistance to opening of netting panels was described in Sala et al. (in Experimental method for quantifying resistance to the opening of netting panels. ICES Journal of Marine Science, 64: 1573–1578, 2007b).Wepresent an alternativemethodwith a similarmethodology: we attempt to estimate themechanical and geometrical properties of a netting material that best fits the experimental measurements of a netting panel. We introduce three major contributions: (i) a considerably simpler uniaxial experimental set-up, which stretches a netting sample in the normal direction of the meshes while leaving free its deformation in the transverse direction; (ii) more accurate theoretical models for mesh resistance to opening; and (iii) new strategies to estimate the parameters of the models. We present the results of the analysis of polyethylene, compacted polyethylene, single-twine, and double-twine netting. Some of the assessed combinations of estimation strategies and theoretical models have an excellent goodness of fit with experimental data. The method proved to be a simple yet accurate way to quantify the mesh resistance to opening of netting panels.

[1]  Alessandro Lucchetti,et al.  The influence of twine thickness on the size selectivity of polyamide codends in a Mediterranean bottom trawl , 2007 .

[2]  Daniel Priour.  Introduction of mesh resistance to opening in a triangular element for calculation of nets by the finite element method , 2001 .

[3]  The Influence of Bending Stiffness on the Deformation of Axisymmetric Networks , 2004 .

[4]  Alessandro Lucchetti,et al.  The change in physical properties of some nylon (PA) netting samples before and after use , 2004 .

[5]  Bin Teng,et al.  Numerical simulation of the hydrodynamic behaviour of submerged plane nets in current , 2006 .

[6]  F. O’Neill,et al.  Bending of Twines and Fibres Under Tension , 2002 .

[7]  Finbarr G. O’Neill,et al.  PRESEMO - a predictive model of codend selectivity - a tool for fishery managers , 2007 .

[8]  F. O’Neill,et al.  Comparison and Validation of Two Models of Netting Deformation , 2009 .

[9]  P. Rousseeuw,et al.  Wiley Series in Probability and Mathematical Statistics , 2005 .

[10]  Bent Herrmann,et al.  Theoretical study of the influence of twine thickness on haddock selectivity in diamond mesh cod-ends , 2006 .

[11]  N. G. Mccrum,et al.  Principles Of Polymer Engineering , 1988 .

[12]  F. G. O’Neill.  A theoretical study of the factors which influence the measurement of fishing netting mesh size , 2003 .

[13]  Bent Herrmann,et al.  Effect of catch size and shape on the selectivity of diamond mesh cod-ends. I. Model development , 2005 .

[14]  Manuel González,et al.  Nonlinear stiffness models of a net twine to describe mesh resistance to opening of flexible net structures , 2016 .

[15]  Ludvig Ahm Krag,et al.  The influence of twine thickness, twine number and netting orientation on codend selectivity , 2013 .

[16]  Bent Herrmann,et al.  Effect of catch size and shape on the selectivity of diamond mesh cod-ends: II. Theoretical study of haddock selection , 2005 .

[17]  Daniel Priour.  Calculation of net shapes by the finite element method with triangular elements , 1999 .

[18]  Chun-Woo Lee,et al.  Physical modeling for underwater flexible systems dynamic simulation , 2005 .

[19]  R. J. Fryer,et al.  Experimental method for quantifying resistance to the opening of netting panels , 2007 .

[20]  Finbarr G. O’Neill,et al.  Modelling axisymmetric cod-ends made of different mesh types , 2009 .

[21]  J. Robertson,et al.  The effect of twine thickness on cod-end selectivity of trawls for haddock in the North Sea , 1996 .

[22]  J. Z. Zhu,et al.  The finite element method , 1977 .

[23]  Manuel González,et al.  Assessing the suitability of gradient-based energy minimization methods to calculate the equilibrium shape of netting structures , 2014 .

[24]  Tsutomu Takagi,et al.  Validity and layout of “NaLA”: a net configuration and loading analysis system , 2004 .