MODELLING OF CORROSION PROTECTION FOR REINFORCED CONCRETE STRUCTURES WITH SURFACE COATINGS/GELŽBETONINIŲ KONSTRUKCIJŲ SU PAVIRŠINĖMIS DANGOMIS KOROZINĖS APSAUGOS MODELIAVIMAS

Abstract Corrosion is a serious problem for the durability of reinforced concrete structures. These structures need to be protected from corrosion in a variety of exposure conditions ranging from atmospheric to continuous immersion in water or chemicals. One of the ways to protect reinforced concrete structures from corrosion is to use protective coatings. The surface barriers of non‐degradable materials are able to slow down considerably the rate of deterioration of concrete structures and to overcome most durability problems associated with external attack. Design of durability of concrete structures with protective coatings needs to be established. In this paper a general framework for service life prediction and reliability evaluation of anticorrosion protective system (CPS), which is represented by protective surface barrier, concrete cover, and steel reinforcement itself of reinforced concrete structures, is presented. This approach is based on a reasonable understanding of the main degradation proc...

[1]  P. Schießl,et al.  Draft recommendation for repair strategies for concrete structures damaged by reinforcement corrosion , 1994 .

[2]  Z. Kamaitis DAMAGE TO CONCRETE BRIDGES DUE TO REINFORCEMENT CORROSION.. , 2002 .

[3]  M. P. Rodrigues,et al.  Effectiveness of surface coatings to protect reinforced concrete in marine environments , 2000 .

[4]  P. Helene,et al.  Efficacy of surface hydrophobic agents in reducing water and chloride ion penetration in concrete , 2007 .

[5]  A. I. Al-Mana,et al.  Influence of atmospheric corrosion on the mechanical properties of reinforcing steel , 1994 .

[6]  Cruz Alonso,et al.  Cover cracking as a function of bar corrosion: Part I-Experimental test , 1993 .

[7]  D. Chung,et al.  Use of polymers for cement-based structural materials , 2004 .

[8]  V. Jokūbaitis Regularities in propagation of opened corrosion‐induced cracks in concrete , 2007 .

[9]  Evan C. Bentz PROBABILISTIC MODELING OF SERVICE LIFE FOR STRUCTURES SUBJECTED TO CHLORIDES , 2003 .

[10]  Zenonas Kamaitis,et al.  Structural design of polymer protective coatings for reinforced concrete structures. Part II: Experimental verification , 2007 .

[11]  Cruz Alonso,et al.  Cover cracking as a function of rebar corrosion: Part 2—Numerical model , 1993 .

[12]  C. Page,et al.  Performance characteristics of surface coatings applied to concrete for control of reinforcement corrosion , 2000 .

[13]  A. Barbucci,et al.  Crack-bridging ability of organic coatings for concrete: influence of the method of concrete cracking, thickness and nature of the coating , 2004 .

[14]  C. Andrade,et al.  Some questions on the corrosion of steel in concrete. Part II: Corrosion mechanism and monitoring, service life prediction and protection methods , 1996 .

[15]  Mohammed Maslehuddin,et al.  Performance of concrete coating under varying exposure conditions , 2002 .

[16]  Dimitri V. Val,et al.  Life-cycle cost analysis of reinforced concrete structures in marine environments , 2003 .

[17]  D. Coronelli,et al.  CORROSION CRACKING AND BOND STRENGTH MODELING FOR CORRODED BARS IN REINFORCED CONCRETE , 2002 .

[18]  Omar S. Baghabra Al-Amoudi,et al.  Effectiveness of surface coatings in improving concrete durability , 2003 .

[19]  Cumaraswamy Vipulanandan,et al.  Performance of polyurethane-coated concrete in sewer environment , 2005 .

[20]  Matthew A. Miltenberger,et al.  PREDICTING THE SERVICE LIFE OF CONCRETE MARINE STRUCTURES: AN ENVIRONMENTAL METHODOLOGY , 1998 .

[21]  Z. Kamaitis Structural design of polymer protective coatings for reinforced concrete structures. Part I: Theoretical considerations , 2007 .

[22]  M. R. Jones,et al.  Comparative performance of chloride attenuating and corrosion inhibiting systems for reinforced concrete , 2004 .

[23]  A. Almusallam,et al.  Effect of degree of corrosion on the properties of reinforcing steel bars , 2001 .