Thermo-electrochemical modeling of ammonia-fueled solid oxide fuel cells considering ammonia thermal decomposition in the anode

Abstract Ammonia (NH 3 ) is a promising hydrogen carrier and a possible fuel for use in Solid Oxide Fuel Cells (SOFCs). In this study, a 2D thermo-electrochemical model is developed to investigate the heat/mass transfer, chemical (ammonia thermal decomposition) and electrochemical reactions in a planar SOFC running on ammonia. The model integrates three sub-models: (1) an electrochemical model relating the current density–voltage characteristics; (2) a chemical model calculating the rate of ammonia thermal decomposition reaction; (3) a 2D computational fluid dynamics (CFD) model that simulates the heat and mass transfer phenomena. Simulations are conducted to study the complicated physical–chemical processes in NH 3 -fueled SOFCs. It is found that increasing the inlet temperature of NH 3 -fueled SOFC is favorable for a higher electric output, but the temperature gradient in the SOFC is considerably higher, particularly near the inlet of the SOFC. The effects of operating potential and inlet gas velocity on NH 3 -fueled SOFC performance are investigated. It is found that an increase in inlet gas velocity from 1 m s −1 to 10 m s −1 slightly decreases the SOFC performance and does not affect the temperature field significantly. For comparison, decreasing the gas velocity to 0.2 m s −1 is more effective to reduce the temperature gradient in SOFC.

[1]  Q. Ma,et al.  Direct utilization of ammonia in intermediate-temperature solid oxide fuel cells , 2006 .

[2]  Meng Ni,et al.  Modeling of a planar solid oxide fuel cell based on proton‐conducting electrolyte , 2010 .

[3]  Feridun Hamdullahpur,et al.  Conceptual Design of a Novel Ammonia-Fuelled Portable Solid Oxide Fuel Cell System , 2010 .

[4]  M. W. Chase.  NIST-JANAF thermochemical tables , 1998 .

[5]  R. Herbin,et al.  Three-dimensional numerical simulation for various geometries of solid oxide fuel cells , 1996 .

[6]  D. Goodman,et al.  Catalytic Decomposition of Methane: Towards Production of CO-free Hydrogen for Fuel Cells , 2001 .

[7]  S. Yin,et al.  A mini-review on ammonia decomposition catalysts for on-site generation of hydrogen for fuel cell applications , 2004 .

[8]  Ioannis K. Kookos,et al.  Modelling mass transport in solid oxide fuel cell anodes: a case for a multidimensional dusty gas-based model , 2008 .

[9]  Q. Ma,et al.  Comparative study on the performance of a SDC-based SOFC fueled by ammonia and hydrogen , 2007 .

[10]  Analysis of parameter effects on transport phenomena in conjunction with chemical reactions in ducts relevant for methane reformers , 2007 .

[11]  S. Chan,et al.  A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness , 2001 .

[12]  Chia-Jung Hsu.  Numerical Heat Transfer and Fluid Flow , 1981 .

[13]  Vinod M. Janardhanan,et al.  Numerical study of mass and heat transport in solid-oxide fuel cells running on humidified methane , 2007 .

[14]  Fabian Mueller,et al.  Dynamic modeling and evaluation of solid oxide fuel cell – combined heat and power system operating strategies , 2009 .

[15]  Chao-Yang Wang,et al.  Fundamental Models for Fuel Cell Engineering , 2004 .

[16]  Dennis Y.C. Leung,et al.  Mathematical modeling of ammonia-fed solid oxide fuel cells with different electrolytes , 2008 .

[17]  Hengyong Xu,et al.  Characterizations and activities of the nano-sized Ni/Al2O3 and Ni/La-Al2O3 catalysts for NH3 decomposition , 2005 .

[18]  H. Ho,et al.  Modelling of simple hybrid solid oxide fuel cell and gas turbine power plant , 2002 .

[19]  B. A. Haberman,et al.  A Detailed Three-Dimensional Simulation of an IP-SOFC Stack , 2008 .

[20]  Yann Bultel,et al.  Modeling of a Solid Oxide Fuel Cell Fueled by Methane: Analysis of Carbon Deposition , 2007 .

[21]  Bengt Sundén,et al.  Three-dimensional computational analysis of gas and heat transport phenomena in ducts relevant for anode-supported solid oxide fuel cells , 2003 .

[22]  Panagiotis Tsiakaras,et al.  Thermodynamic analysis of a methane fed SOFC system based on a protonic conductor , 2002 .

[23]  John B. Goodenough,et al.  Solid Oxide Fuel Cell Technology: Principles, Performance and Operations , 2009 .

[24]  Eric Croiset,et al.  A multi-level simulation platform of natural gas internal reforming solid oxide fuel cell–gas turbine hybrid generation system: Part I. Solid oxide fuel cell model library , 2010 .

[25]  M. Chyu,et al.  Simulation of the chemical/electrochemical reactions and heat/mass transfer for a tubular SOFC in a stack , 2003 .

[26]  William J. Thomson,et al.  Ammonia decomposition kinetics over Ni-Pt/Al2O3 for PEM fuel cell applications , 2002 .

[27]  Mustafa Fazil Serincan,et al.  A transient analysis of a micro-tubular solid oxide fuel cell (SOFC) , 2009 .

[28]  N. Sammes,et al.  Dynamic modeling of single tubular SOFC combining heat/mass transfer and electrochemical reaction effects , 2005 .

[29]  K. Kreuer.  First published online as a Review in Advance on April 9, 2003 PROTON-CONDUCTING OXIDES , 2022 .

[30]  K. Kendall,et al.  High temperature solid oxide fuel cells : fundamentals, design and applicatons , 2003 .

[31]  Yan Ji,et al.  Effects of transport scale on heat/mass transfer and performance optimization for solid oxide fuel cells , 2006 .

[32]  K. Kobe.  The properties of gases and liquids , 1959 .

[33]  Zongping Shao,et al.  Proton-conducting fuel cells operating on hydrogen, ammonia and hydrazine at intermediate temperatures , 2010 .

[34]  C. Adjiman,et al.  Comparison of two IT DIR-SOFC models: Impact of variable thermodynamic, physical, and flow properties. Steady-state and dynamic analysis , 2005 .

[35]  N. Shikazono,et al.  Numerical analysis of coupled transport and reaction phenomena in an anode-supported flat-tube solid oxide fuel cell , 2008 .

[36]  Jacob N. Chung,et al.  Numerical modeling of hydrogen production from ammonia decomposition for fuel cell applications , 2010 .

[37]  Adam Hawkes,et al.  Techno-economic modelling of a solid oxide fuel cell stack for micro combined heat and power , 2006 .

[38]  D. Leung,et al.  An improved electrochemical model for the NH3 fed proton conducting solid oxide fuel cells at intermediate temperatures , 2008 .

[39]  S. Yin,et al.  Investigation on the catalysis of COx-free hydrogen generation from ammonia , 2004 .

[40]  Meng Ni,et al.  2D thermal-fluid modeling and parametric analysis of a planar solid oxide fuel cell , 2010 .

[41]  Manoj Pillai,et al.  Modeling electrochemical partial oxidation of methane for cogeneration of electricity and syngas in solid-oxide fuel cells , 2008 .