Sensorless Speed And Position Estimation Of PMSM Based On Sliding Mode Observer With Tan Hyperbolic Function

Sinusoidal Permanent Magnet synchronous motors have become more popular for new drives. Advantages of PMSMs includes high torque to inertia ratio, high efficiency and high power density. For the PMSMs it is necessary to estimate the rotor position and speed as well. A good error filtering, low angle error and dynamic performance can be obtained with feedback observers. The sliding mode observer (SMO) is one of the observers with a system model suitable for PM synchronous motors. The study deals with the analysis based on simulation of PMSM with space vector pulse width modulation in MATLAB environment. In this paper sensorless estimation of speed and position using SMO with tan hyperbolic function achieved. The result is compared with SMO using sigmoidal function. The simulation results shows that sliding mode observer with tan hyperbolic function gives smooth performance. Keywords: PMSM, Sliding Mode observer,Sigmoidal function, tan hyperbolic function

[1]  Shihua Li,et al.  Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer , 2012, IEEE Transactions on Industrial Electronics.

[2]  Mihai Comanescu.  Cascaded EMF and speed sliding mode observer for the nonsalient PMSM , 2010, IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society.

[3]  P. Tomei,et al.  Observer-based speed tracking control for sensorless permanent magnet synchronous motors with unknown load torque , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[4]  Huang Wenxin,et al.  An improved sliding mode observer for position sensorless vector control drive of PMSM , 2009, 2009 IEEE 6th International Power Electronics and Motion Control Conference.

[5]  Marcian N. Cirstea,et al.  Simulink Modeling and Design of an Efficient Hardware-Constrained FPGA-Based PMSM Speed Controller , 2012, IEEE Transactions on Industrial Informatics.

[6]  Muhammed Fazlur Rahman,et al.  Rotor position and speed estimation of a variable structure direct torque controlled IPM synchronous motor drive at very low speeds , 2008, 2008 Australasian Universities Power Engineering Conference.

[7]  Vaclav Smidl,et al.  Reduced-order square-root EKF for sensorless control of PMSM drives , 2011, IECON 2011 - 37th Annual Conference of the IEEE Industrial Electronics Society.

[8]  G Pellegrino,et al.  Sensorless Position Control of Permanent-Magnet Motors With Pulsating Current Injection and Compensation of Motor End Effects , 2011, IEEE Transactions on Industry Applications.

[9]  Roberto Leidhold.  Position Sensorless Control of PM Synchronous Motors Based on Zero-Sequence Carrier Injection , 2011, IEEE Transactions on Industrial Electronics.

[10]  Grzegorz Tarchala.  Influence of the sign function approximation form on performance of the sliding-mode speed observer for induction motor drive , 2011, 2011 IEEE International Symposium on Industrial Electronics.

[11]  Teresa Orlowska-Kowalska,et al.  Stator-Current-Based MRAS Estimator for a Wide Range Speed-Sensorless Induction-Motor Drive , 2010, IEEE Transactions on Industrial Electronics.

[12]  Z. Q. Zhu,et al.  Investigation of Effectiveness of Sensorless Operation in Carrier-Signal-Injection-Based Sensorless-Control Methods , 2011, IEEE Transactions on Industrial Electronics.

[13]  Zheng Zhang,et al.  Sliding-Mode Sensorless Control of Direct-Drive PM Synchronous Motors for Washing Machine Applications , 2009, IEEE Transactions on Industry Applications.