The rise of conductive copper inks: challenges and perspectives
暂无分享,去创建一个
K. Suganuma | Xuying Liu | J. Jiu | Wanli Li | T. Minari | Lingying Li | Qingqing Sun | M. Kanehara
[1] Y. Hahn,et al. Cost-effective silver ink for printable and flexible electronics with robust mechanical performance , 2019, Chemical Engineering Journal.
[2] Jong-Hyun Lee,et al. Dewetting behavior of Ag in Ag-coated Cu particle with thick Ag shell , 2019, Applied Surface Science.
[3] Xiaofeng Dai,et al. Room temperature sintering of Cu-Ag core-shell nanoparticles conductive inks for printed electronics , 2019, Chemical Engineering Journal.
[4] Su Yeon Lee,et al. Printable Thick Copper Conductors from Optically Modulated Multidimensional Particle Mixtures. , 2019, ACS applied materials & interfaces.
[5] K. Suganuma,et al. Fully embedded CuNWs/PDMS conductor with high oxidation resistance and high conductivity for stretchable electronics , 2019, Journal of Materials Science.
[6] H. Nishikawa,et al. Effect of Substrates on Fracture Mechanism and Process Optimization of Oxidation–Reduction Bonding with Copper Microparticles , 2019, Journal of Electronic Materials.
[7] S. Magdassi,et al. Conductive nanomaterials for 2D and 3D printed flexible electronics. , 2019, Chemical Society reviews.
[8] Jae Kyeong Jeong,et al. Sintering Behavior of Copper Nanoparticle Ink by Laser in Air. , 2019, Journal of Nanoscience and Nanotechnology.
[9] K. Suganuma,et al. Large-Scale and Galvanic Replacement Free Synthesis of Cu@Ag Core-Shell Nanowires for Flexible Electronics. , 2019, Inorganic chemistry.
[10] P. Peng,et al. One-step selective laser patterning of copper/graphene flexible electrodes , 2019, Nanotechnology.
[11] Y. Liao,et al. Facile Preparation of Cu/Ag Core/Shell Electrospun Nanofibers as Highly Stable and Flexible Transparent Conductive Electrodes for Optoelectronic Devices. , 2019, ACS applied materials & interfaces.
[12] Jian Gao,et al. PVP-Mediated Galvanic Replacement Synthesis of Smart Elliptic Cu-Ag Nanoflakes for Electrically Conductive Pastes. , 2019, ACS applied materials & interfaces.
[13] Caroline Sunyong Lee,et al. Optimization of dispersant-free colloidal ink droplets for inkjet patterning without the coffee-ring effect using 1-octanethiol-coated copper nano-ink with a Standard Clean-1-treated substrate , 2019, Materials Chemistry and Physics.
[14] A. Muramatsu,et al. Ambient Aqueous-Phase Synthesis of Copper Nanoparticles and Nanopastes with Low-Temperature Sintering and Ultra-High Bonding Abilities , 2019, Scientific Reports.
[15] S. Ko,et al. Semipermanent Copper Nanowire Network with an Oxidation‐Proof Encapsulation Layer , 2019, Advanced Materials Technologies.
[16] K. Suganuma,et al. Microstructure and mechanical properties of sintered Ag particles with flake and spherical shape from nano to micro size , 2019, Materials & Design.
[17] Katsuaki Suganuma,et al. Highly Conductive Ag Paste for Recoverable Wiring and Reliable Bonding Used in Stretchable Electronics. , 2018, ACS applied materials & interfaces.
[18] R. Malhotra,et al. Shape-Tuned Junction Resistivity and Self-Damping Dynamics in Intense Pulsed Light Sintering of Silver Nanostructure Films. , 2018, ACS applied materials & interfaces.
[19] K. Suganuma,et al. Novel copper particle paste with self-reduction and self-protection characteristics for die attachment of power semiconductor under a nitrogen atmosphere , 2018, Materials & Design.
[20] Woon-Hong Yeo,et al. Ultrahigh Conductivity and Superior Interfacial Adhesion of a Nanostructured, Photonic-Sintered Copper Membrane for Printed Flexible Hybrid Electronics. , 2018, ACS applied materials & interfaces.
[21] G. Cadenas-Pliego,et al. Synthesis and Thermomechanical Characterization of Nylon 6/Cu Nanocomposites Produced by an Ultrasound-Assisted Extrusion Method , 2018, Advances in Materials Science and Engineering.
[22] Wei Guo,et al. Electrical and Mechanical Properties of Ink Printed Composite Electrodes on Plastic Substrates , 2018, Applied Sciences.
[23] Yan Li,et al. A low temperature self-reducible copper hydroxide amino–alcohol complex catalyzed by formic acid for conductive copper films , 2018 .
[24] Xiaofeng Dai,et al. Dual effects of water on the performance of copper complex conductive inks for printed electronics , 2018, Chemical Engineering Science.
[25] S. Magdassi,et al. Thin Copper Flakes for Conductive Inks Prepared by Decomposition of Copper Formate and Ultrafine Wet Milling , 2018, Advanced Materials Technologies.
[26] N. Zhang,et al. Tannic acid stabilized antioxidation copper nanoparticles in aqueous solution for application in conductive ink , 2018, Journal of Materials Science: Materials in Electronics.
[27] T. Ohishi,et al. Preparation and Properties of Copper Fine Wire on Polyimide Film in Air by Laser Irradiation and Mixed-Copper-Complex Solution Containing Glyoxylic Acid Copper Complex and Methylamine Copper Complex , 2018 .
[28] Conner K. Dunn,et al. Intense pulsed light sintering of thick conductive wires on elastomeric dark substrate for hybrid 3D printing applications , 2018, Smart Materials and Structures.
[29] Giovanni Ligorio,et al. Truly Low Temperature Sintering of Printed Copper Ink Using Formic Acid , 2018, Advanced Materials Technologies.
[30] P. González‐Morones,et al. Oxidation of Copper Nanoparticles Protected with Different Coatings and Stored under Ambient Conditions , 2018, Journal of Nanomaterials.
[31] Kye-Si Kwon,et al. Green laser sintering of copper oxide (CuO) nano particle (NP) film to form Cu conductive lines , 2018, AIP Advances.
[32] Wei Zhang,et al. A concise and antioxidative method to prepare copper conductive inks in a two-phase water/xylene system for printed electronics , 2018, Chemical Physics Letters.
[33] C. E. Knapp,et al. Precursors for Atmospheric Plasma‐Enhanced Sintering: Low‐Temperature Inkjet Printing of Conductive Copper , 2018, ChemistryOpen.
[34] K. Suganuma,et al. Size-Controllable Synthesis of Bimodal Cu Particles by Polyol Method and Their Application in Die Bonding for Power Devices , 2018, IEEE Transactions on Components, Packaging and Manufacturing Technology.
[35] Jooho Moon,et al. All-Solution-Processed Thermally and Chemically Stable Copper-Nickel Core-Shell Nanowire-Based Composite Window Electrodes for Perovskite Solar Cells. , 2018, ACS applied materials & interfaces.
[36] Wen‐Di Li,et al. Selective Electroless Metallization of Micro- and Nanopatterns via Poly(dopamine) Modification and Palladium Nanoparticle Catalysis for Flexible and Stretchable Electronic Applications. , 2018, ACS applied materials & interfaces.
[37] K. Suganuma,et al. Enhanced high temperature stability of printed Cu wirings based on large Cu particle ink, Ag element addition, and intense pulsed light sintering , 2018, 2018 19th International Conference on Electronic Packaging Technology (ICEPT).
[38] S. Uemura,et al. Suitability of Copper Nitride as a Wiring Ink Sintered by Low-Energy Intense Pulsed Light Irradiation , 2018, Nanomaterials.
[39] Min-bo Zhou,et al. Fabrication of oxidation-resistant submicron copper particles and the conductive ink as well as its sintering behavior on the flexible substrate , 2018, 2018 19th International Conference on Electronic Packaging Technology (ICEPT).
[40] J. Rho,et al. Effect of temperature on the oxidation of Cu nanowires and development of an easy to produce, oxidation-resistant transparent conducting electrode using a PEDOT:PSS coating , 2018, Scientific Reports.
[41] R. Sun,et al. Adhesion‐Enhanced Flexible Conductive Metal Patterns on Polyimide Substrate Through Direct Writing Catalysts with Novel Surface‐Modification Electroless Deposition , 2018, ChemistrySelect.
[42] K. Suganuma,et al. Highly Densified Cu Wirings Fabricated from Air‐Stable Cu Complex Ink with High Conductivity, Enhanced Oxidation Resistance, and Flexibility , 2018, Advanced Materials Interfaces.
[43] Xiaodong Li,et al. A low temperature and air-sinterable copper-diamine complex-based metal organic decomposition ink for printed electronics , 2018 .
[44] Yuanzhe Piao,et al. An Ultradurable and Uniform Cu Electrode by Blending Carbon Nanotube Fillers in Copper‐Based Metal–Organic Decomposition Ink for Flexible Printed Electronics , 2018, Advanced Materials Interfaces.
[45] Caroline Sunyong Lee,et al. Application of flash-light sintering method to flexible inkjet printing using anti-oxidant copper nanoparticles , 2018, Thin Solid Films.
[46] H. Lee,et al. Roll-to-roll processed, highly conductive, and flexible aluminum (Al) electrodes based on Al precursor inks , 2018, RSC advances.
[47] M. Cullinan,et al. Effect of size, morphology, and synthesis method on the thermal and sintering properties of copper nanoparticles for use in microscale additive manufacturing processes , 2018 .
[48] Xiangyang Liu,et al. The role of amine ligands in governing film morphology and electrical properties of copper films derived from copper formate-based molecular inks. , 2018, Nanoscale.
[49] M. Kurihara,et al. Solvent-free synthesis of monodisperse Cu nanoparticles by thermal decomposition of an oleylamine-coordinated Cu oxalate complex. , 2018, Dalton transactions.
[50] M. Layani,et al. Binuclear Copper Complex Ink as a Seed for Electroless Copper Plating Yielding >70% Bulk Conductivity on 3D Printed Polymers , 2018 .
[51] T. Shi,et al. The novel Cu nanoaggregates formed by 5 nm Cu nanoparticles with high sintering performance at low temperature , 2018 .
[52] Hak-Sung Kim,et al. UV-assisted flash light welding process to fabricate silver nanowire/graphene on a PET substrate for transparent electrodes , 2018, Nano Research.
[53] K. Suganuma,et al. Self-catalyzed copper-silver complex inks for low-cost fabrication of highly oxidation-resistant and conductive copper-silver hybrid tracks at a low temperature below 100 °C. , 2018, Nanoscale.
[54] Su Yeon Lee,et al. Highly durable Cu-based electrodes from a printable nanoparticle mixture ink: flash-light-sintered, kinetically-controlled microstructure. , 2018, Nanoscale.
[55] C. Majidi,et al. Visually Imperceptible Liquid‐Metal Circuits for Transparent, Stretchable Electronics with Direct Laser Writing , 2018, Advanced materials.
[56] Boris Murmann,et al. Skin electronics from scalable fabrication of an intrinsically stretchable transistor array , 2018, Nature.
[57] Meifang Zhu,et al. Well-defined silver conductive pattern fabricated on polyester fabric by screen printing a dopamine surface modifier followed by electroless plating. , 2018, Soft matter.
[58] Bongchul Kang,et al. Low-cost optical fabrication of flexible copper electrode via laser-induced reductive sintering and adhesive transfer , 2018 .
[59] K. Suganuma,et al. Highly conductive copper films based on submicron copper particles/copper complex inks for printed electronics: Microstructure, resistivity, oxidation resistance, and long-term stability , 2018 .
[60] Scott A. Williams,et al. Reactive Silver Oxalate Ink Composition with Enhanced Curing Conditions for Flexible Substrates. , 2018, ACS applied materials & interfaces.
[61] Su Yeon Lee,et al. Enhanced Oxidation-Resistant Cu@Ni Core-Shell Nanoparticles for Printed Flexible Electrodes. , 2018, ACS applied materials & interfaces.
[62] J. Jang,et al. Fabrication of sinter-free conductive Cu paste using sub-10 nm copper nanoparticles , 2017 .
[63] S. Ramakrishna,et al. A review on inkjet printing of CNT composites for smart applications , 2017 .
[64] T. Yonezawa,et al. Matrix Sputtering Method: A Novel Physical Approach for Photoluminescent Noble Metal Nanoclusters. , 2017, Accounts of chemical research.
[65] T. Shi,et al. A green approach of synthesizing of Cu-Ag core-shell nanoparticles and their sintering behavior for printed electronics , 2017 .
[66] Hyun-Chul Kim,et al. A fast fabrication of copper nanowire transparent conductive electrodes by using pulsed laser irradiation , 2017, Scientific Reports.
[67] G. Filipič,et al. Seed mediated copper nanoparticle synthesis for fabricating oxidation free interdigitated electrodes using intense pulse light sintering for flexible printed chemical sensors , 2017 .
[68] T. Yonezawa,et al. Au/Cu Bimetallic Nanoparticles via Double-Target Sputtering onto a Liquid Polymer. , 2017, Langmuir : the ACS journal of surfaces and colloids.
[69] S. Nie,et al. Hybrid Printing Metal-mesh Transparent Conductive Films with Lower Energy Photonically Sintered Copper/tin Ink , 2017, Scientific Reports.
[70] Ravina Singh,et al. Inkjet printed nanomaterial based flexible radio frequency identification (RFID) tag sensors for the internet of nano things , 2017 .
[71] Fan Zhang,et al. 3D Inkjet Printing of Electronics Using UV Conversion , 2017 .
[72] Y. Shacham-Diamand,et al. Copper interconnections and antennas fabricated by hot-pressing printed copper formate , 2017 .
[73] Sam S. Yoon,et al. Supersonically Sprayed Copper–Nickel Microparticles as Flexible and Printable Thin‐Film High‐Temperature Heaters , 2017 .
[74] D. Lee,et al. Review of Conductive Copper Paste for c-Si Solar Cells , 2017 .
[75] H. Kawasaki,et al. Cu-based composite inks of a self-reductive Cu complex with Cu flakes for the production of conductive Cu films on cellulose paper , 2017 .
[76] Yusuke Akiyama,et al. Contribution of Ligand Oxidation Products to High Durability of Copper Films Prepared from Low‐Sintering‐Temperature Copper Ink on Polymer Substrates , 2017 .
[77] Ho Won Jang,et al. Intense pulsed light for split-second structural development of nanomaterials , 2017 .
[78] Yit‐Tsong Chen,et al. One-Step Synthesis of Antioxidative Graphene-Wrapped Copper Nanoparticles on Flexible Substrates for Electronic and Electrocatalytic Applications. , 2017, ACS applied materials & interfaces.
[79] Katsuaki Suganuma,et al. Printable and Flexible Copper-Silver Alloy Electrodes with High Conductivity and Ultrahigh Oxidation Resistance. , 2017, ACS applied materials & interfaces.
[80] X. Zu,et al. Synthesis of highly environmental stable copper–silver core–shell nanoparticles for direct writing flexible electronics , 2017, Journal of Materials Science: Materials in Electronics.
[81] Takao Someya,et al. Recent Progress in the Development of Printed Thin‐Film Transistors and Circuits with High‐Resolution Printing Technology , 2017, Advanced materials.
[82] Chang Li,et al. UV-Sintered Low-Temperature Solution-Processed SnO2 as Robust Electron Transport Layer for Efficient Planar Heterojunction Perovskite Solar Cells. , 2017, ACS applied materials & interfaces.
[83] Wei Wu. Inorganic nanomaterials for printed electronics: a review. , 2017, Nanoscale.
[84] H. Kawasaki,et al. Fabrication of Conductive Copper Films on Flexible Polymer Substrates by Low-Temperature Sintering of Composite Cu Ink in Air. , 2017, ACS applied materials & interfaces.
[85] Zhiqiang Niu,et al. Ultrathin Epitaxial Cu@Au Core-Shell Nanowires for Stable Transparent Conductors. , 2017, Journal of the American Chemical Society.
[86] T. Someya,et al. Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes. , 2017, Nature materials.
[87] K. Suganuma,et al. Enhancing Low-Temperature and Pressureless Sintering of Micron Silver Paste Based on an Ether-Type Solvent , 2017, Journal of Electronic Materials.
[88] Hak-Sung Kim,et al. Multi-pulse flash light sintering of bimodal Cu nanoparticle-ink for highly conductive printed Cu electrodes , 2017, Nanotechnology.
[89] K. Suganuma,et al. Die Bonding Performance Using Bimodal Cu Particle Paste Under Different Sintering Atmospheres , 2017, Journal of Electronic Materials.
[90] Y. Liao,et al. Effect of decomposition and organic residues on resistivity of copper films fabricated via low-temperature sintering of complex particle mixed dispersions , 2017, Scientific Reports.
[91] Anming Hu,et al. Laser-Assisted Reduction of Highly Conductive Circuits Based on Copper Nitrate for Flexible Printed Sensors , 2017, Nano-micro letters.
[92] Hak-Sung Kim,et al. Effect of copper oxide shell thickness on flash light sintering of copper nanoparticle ink , 2017 .
[93] S. Magdassi,et al. Plasma-Induced Decomposition of Copper Complex Ink for the Formation of Highly Conductive Copper Tracks on Heat-Sensitive Substrates. , 2017, ACS applied materials & interfaces.
[94] Xin Li,et al. Electric-current-assisted sintering of nanosilver paste for copper bonding , 2017, Journal of Materials Science: Materials in Electronics.
[95] Y. Choa,et al. Full densification of inkjet-printed copper conductive tracks on a flexible substrate utilizing a hydrogen plasma sintering , 2017 .
[96] Alexey Yakushenko,et al. Self-Reducing Copper Precursor Inks and Photonic Additive Yield Conductive Patterns under Intense Pulsed Light , 2017, ACS omega.
[97] R. Hague,et al. Combined Inkjet Printing and Infrared Sintering of Silver Nanoparticles using a Swathe-by-Swathe and Layer-by-Layer Approach for 3-Dimensional Structures. , 2017, ACS applied materials & interfaces.
[98] Y. Liao,et al. Use of decomposable polymer-coated submicron Cu particles with effective additive for production of highly conductive Cu films at low sintering temperature , 2017 .
[99] K. Suganuma,et al. Highly reliable and highly conductive submicron Cu particle patterns fabricated by low temperature heat-welding and subsequent flash light sinter-reinforcement , 2017 .
[100] Sze Kee Tam,et al. High copper loading metal organic decomposition paste for printed electronics , 2017, Journal of Materials Science.
[101] Z. Cui,et al. Printed highly conductive Cu films with strong adhesion enabled by low-energy photonic sintering on low-Tg flexible plastic substrate , 2017, Nanotechnology.
[102] Tao Wang,et al. Synergetic Effect of Blended Alkylamines for Copper Complex Ink To Form Conductive Copper Films. , 2017, Langmuir : the ACS journal of surfaces and colloids.
[103] Mingyu Li,et al. Highly Conductive Cu-Cu Joint Formation by Low-Temperature Sintering of Formic Acid-Treated Cu Nanoparticles. , 2016, ACS applied materials & interfaces.
[104] Jeeyoung Yoo,et al. Self-reducible copper ion complex ink for air sinterable conductive electrodes , 2016 .
[105] Zhe-sheng Feng,et al. A particle-free silver precursor ink useful for inkjet printing to fabricate highly conductive patterns , 2016 .
[106] K. Motomiya,et al. Formation of closely packed Cu nanoparticle films by capillary immersion force for preparing low-resistivity Cu films at low temperature , 2016, Journal of Nanoparticle Research.
[107] Jae Kyeong Jeong,et al. Versatile Metal Nanowiring Platform for Large‐Scale Nano‐ and Opto‐Electronic Devices , 2016, Advanced materials.
[108] H. Kawasaki,et al. Formate-Free Metal-Organic Decomposition Inks of Copper Particles and Self-Reductive Copper Complex for the Fabrication of Conductive Copper Films , 2016 .
[109] Hyunkyoo Kang,et al. Fast sintering of silver nanoparticle and flake layers by infrared module assistance in large area roll-to-roll gravure printing system , 2016, Scientific Reports.
[110] Z. Cui,et al. Printed Electronics: Materials, Technologies and Applications , 2016 .
[111] K. Suganuma,et al. Self-reducible copper inks composed of copper–amino complexes and preset submicron copper seeds for thick conductive patterns on a flexible substrate , 2016 .
[112] H. Gomes,et al. All-inkjet-printed thin-film transistors: manufacturing process reliability by root cause analysis , 2016, Scientific Reports.
[113] Rafiq Ahmad,et al. Low-temperature sintering of highly conductive silver ink for flexible electronics , 2016 .
[114] Lars Rebohle,et al. A review of thermal processing in the subsecond range: semiconductors and beyond , 2016 .
[115] Sunho Jeong,et al. Reducible‐Shell‐Derived Pure‐Copper‐Nanowire Network and Its Application to Transparent Conducting Electrodes , 2016 .
[116] Simon S. Park,et al. Hybrid Copper-Silver Conductive Tracks for Enhanced Oxidation Resistance under Flash Light Sintering. , 2016, ACS applied materials & interfaces.
[117] Hongjun Ji,et al. The low temperature exothermic sintering of formic acid treated Cu nanoparticles for conductive ink , 2016, Journal of Materials Science: Materials in Electronics.
[118] Xuying Liu,et al. Spontaneous Patterning of High‐Resolution Electronics via Parallel Vacuum Ultraviolet , 2016, Advanced materials.
[119] Wendong Yang,et al. Graphene and the related conductive inks for flexible electronics , 2016 .
[120] Hyuck-Mo Lee,et al. Surface modification of oleylamine-capped Ag–Cu nanoparticles to fabricate low-temperature-sinterable Ag–Cu nanoink , 2016, Nanotechnology.
[121] Q. Pei,et al. A Water‐Based Silver‐Nanowire Screen‐Print Ink for the Fabrication of Stretchable Conductors and Wearable Thin‐Film Transistors , 2016, Advanced materials.
[122] Jang‐Ung Park,et al. Newly Designed Cu/Cu10Sn3 Core/Shell Nanoparticles for Liquid Phase-Photonic Sintered Copper Electrodes: Large-Area, Low-Cost Transparent Flexible Electronics , 2016 .
[123] Mei Zhen Ng,et al. Enhanced copper micro/nano-particle mixed paste sintered at low temperature for 3D interconnects , 2016 .
[124] Gerd Grau,et al. Gravure-printed electronics: recent progress in tooling development, understanding of printing physics, and realization of printed devices , 2016 .
[125] Young-Min Choi,et al. Transversally Extended Laser Plasmonic Welding for Oxidation-Free Copper Fabrication toward High-Fidelity Optoelectronics , 2016 .
[126] R. Diaz,et al. Kinetic trapping through coalescence and the formation of patterned Ag-Cu nanoparticles. , 2016, Nanoscale.
[127] Myeongkyu Lee,et al. Laser-direct process of Cu nano-ink to coat highly conductive and adhesive metallization patterns on plastic substrate , 2016 .
[128] Hyunmin Cho,et al. Low-Temperature Oxidation-Free Selective Laser Sintering of Cu Nanoparticle Paste on a Polymer Substrate for the Flexible Touch Panel Applications. , 2016, ACS applied materials & interfaces.
[129] H. Tsao,et al. Copper conductive lines on flexible substrates fabricated at room temperature , 2016 .
[130] Yeon-Taek Hwang,et al. Electrical wire explosion process of copper/silver hybrid nano-particle ink and its sintering via flash white light to achieve high electrical conductivity , 2016, Nanotechnology.
[131] Nae-Eung Lee,et al. Mogul‐Patterned Elastomeric Substrate for Stretchable Electronics , 2016, Advanced materials.
[132] Heejoon Ahn,et al. Two-step flash light sintering process for enhanced adhesion between copper complex ion/silane ink and a flexible substrate , 2016 .
[133] Yong-Rae Jang,et al. Intensive Plasmonic Flash Light Sintering of Copper Nanoinks Using a Band-Pass Light Filter for Highly Electrically Conductive Electrodes in Printed Electronics. , 2016, ACS applied materials & interfaces.
[134] Rajender S Varma,et al. Cu and Cu-Based Nanoparticles: Synthesis and Applications in Catalysis. , 2016, Chemical reviews.
[135] Yanhong Tian,et al. One-Step Fabrication of Stretchable Copper Nanowire Conductors by a Fast Photonic Sintering Technique and Its Application in Wearable Devices. , 2016, ACS applied materials & interfaces.
[136] A. Kell,et al. Pyridine-copper(ii) formates for the generation of high conductivity copper films at low temperatures. , 2016, Chemical communications.
[137] Sze Kee Tam,et al. Copper pastes using bimodal particles for flexible printed electronics , 2016, Journal of Materials Science.
[138] T. Yonezawa,et al. Low temperature sintering process of copper fine particles under nitrogen gas flow with Cu2+-alkanolamine metallacycle compounds for electrically conductive layer formation , 2016 .
[139] Guoxu Liu,et al. Direct writing of stable Cu–Ag-based conductive patterns for flexible electronics , 2016 .
[140] Hak-Sung Kim,et al. All-photonic drying and sintering process via flash white light combined with deep-UV and near-infrared irradiation for highly conductive copper nano-ink , 2016, Scientific Reports.
[141] G. Veith,et al. Low-Thermal-Budget Photonic Processing of Highly Conductive Cu Interconnects Based on CuO Nanoinks: Potential for Flexible Printed Electronics. , 2016, ACS applied materials & interfaces.
[142] Hak-Sung Kim,et al. Photonic welding of ultra-long copper nanowire network for flexible transparent electrodes using white flash light sintering , 2016 .
[143] Matthew J. Catenacci,et al. Production of Oxidation-Resistant Cu-Based Nanoparticles by Wire Explosion , 2015, Scientific Reports.
[144] Ka Ming Ng,et al. High-concentration copper nanoparticles synthesis process for screen-printing conductive paste on flexible substrate , 2015, Journal of Nanoparticle Research.
[145] A. Martucci,et al. Photonic Sintering of Copper through the Controlled Reduction of Printed CuO Nanocrystals. , 2015, ACS applied materials & interfaces.
[146] Hak-Sung Kim,et al. Copper Nanoparticle/Multiwalled Carbon Nanotube Composite Films with High Electrical Conductivity and Fatigue Resistance Fabricated via Flash Light Sintering. , 2015, ACS applied materials & interfaces.
[147] J. Lewis,et al. Rapid and Versatile Photonic Annealing of Graphene Inks for Flexible Printed Electronics , 2015, Advanced materials.
[148] Hyuck-Mo Lee,et al. Cu-Ag core–shell nanoparticles with enhanced oxidation stability for printed electronics , 2015, Nanotechnology.
[149] K. Suganuma,et al. Fabrication of a flexible copper pattern based on a sub-micro copper paste by a low temperature plasma technique , 2015 .
[150] J. Yu,et al. Electrical behavior of laser-sintered Cu based metal-organic decomposition ink in air environment and application as current collectors in supercapacitor , 2015 .
[151] R. Malhotra,et al. On the self-damping nature of densification in photonic sintering of nanoparticles , 2015, Scientific Reports.
[152] Kenjiro Fukuda,et al. Inkjet-printed copper electrodes using photonic sintering and their application to organic thin-film transistors , 2015 .
[153] T. Ohishi,et al. Fabrication of Copper Wire Using Glyoxylic Acid Copper Complex and Laser Irradiation in Air , 2015 .
[154] R. Arakawa,et al. High-Concentration Synthesis of Sub-10-nm Copper Nanoparticles for Application to Conductive Nanoinks. , 2015, ACS applied materials & interfaces.
[155] M. Hummelgård,et al. Inkjet Fabrication of Copper Patterns for Flexible Electronics: Using Paper with Active Precoatings. , 2015, ACS applied materials & interfaces.
[156] Thad Druffel,et al. Fabrication of Elemental Copper by Intense Pulsed Light Processing of a Copper Nitrate Hydroxide Ink. , 2015, ACS applied materials & interfaces.
[157] Seong‐Hyeon Hong,et al. Effect of the Amine Concentration on Phase Evolution and Densification in Printed Films Using Cu(II) Complex Ink. , 2015, Langmuir : the ACS journal of surfaces and colloids.
[158] T. Yonezawa,et al. Low-temperature nanoredox two-step sintering of gelatin nanoskin-stabilized submicrometer-sized copper fine particles for preparing highly conductive layers , 2015 .
[159] T. Sano,et al. Joining of pure copper using Cu nanoparticles derived from CuO paste , 2015, 2016 Pan Pacific Microelectronics Symposium (Pan Pacific).
[160] Hak-Sung Kim,et al. Flash light sintered copper precursor/nanoparticle pattern with high electrical conductivity and low porosity for printed electronics , 2015 .
[161] Sung-Hyeon Park,et al. A highly reliable copper nanowire/nanoparticle ink pattern with high conductivity on flexible substrate prepared via a flash light-sintering technique. , 2015, ACS applied materials & interfaces.
[162] Matti Mäntysalo,et al. Comparison of laser and intense pulsed light sintering (IPL) for inkjet-printed copper nanoparticle layers , 2015, Scientific Reports.
[163] Donghwa Lee,et al. Copper nanowire-graphene core-shell nanostructure for highly stable transparent conducting electrodes. , 2015, ACS nano.
[164] Jin-seong Park,et al. Ambient atmosphere-processable, printable Cu electrodes for flexible device applications: structural welding on a millisecond timescale of surface oxide-free Cu nanoparticles. , 2015, Nanoscale.
[165] S. Magdassi,et al. Printing a Self‐Reducing Copper Precursor on 2D and 3D Objects to Yield Copper Patterns with 50% Copper's Bulk Conductivity , 2015 .
[166] Farid Nasir Ani,et al. The development supercapacitor from activated carbon by electroless plating—A review , 2015 .
[167] S. Magdassi,et al. Self-reduction of a copper complex MOD ink for inkjet printing conductive patterns on plastics. , 2015, Chemical communications.
[168] Ulrich S. Schubert,et al. Progress of alternative sintering approaches of inkjet-printed metal inks and their application for manufacturing of flexible electronic devices , 2014 .
[169] I. W. Fathona,et al. Synthesis of copper conductive film by low-temperature thermal decomposition of copper–aminediol complexes under an air atmosphere , 2014 .
[170] Hak-Sung Kim,et al. The effect of poly (N-vinylpyrrolidone) molecular weight on flash light sintering of copper nanopaste , 2014 .
[171] Hyuck-Mo Lee,et al. Ag–Cu Bimetallic Nanoparticles with Enhanced Resistance to Oxidation: A Combined Experimental and Theoretical Study , 2014 .
[172] S. Hsiao,et al. Efficient and Uniform Planar‐Type Perovskite Solar Cells by Simple Sequential Vacuum Deposition , 2014, Advanced materials.
[173] S. Magdassi,et al. Conductive nanomaterials for printed electronics. , 2014, Small.
[174] Seung Hwan Ko,et al. Fast Plasmonic Laser Nanowelding for a Cu‐Nanowire Percolation Network for Flexible Transparent Conductors and Stretchable Electronics , 2014, Advanced materials.
[175] Daeho Lee,et al. Vacuum-free, maskless patterning of Ni electrodes by laser reductive sintering of NiO nanoparticle ink and its application to transparent conductors. , 2014, ACS nano.
[176] Adrien Pierre,et al. All‐Printed Flexible Organic Transistors Enabled by Surface Tension‐Guided Blade Coating , 2014, Advanced materials.
[177] A. Kell,et al. Photosintering and electrical performance of CuO nanoparticle inks , 2014 .
[178] Masayuki Kanehara,et al. Room‐Temperature Printing of Organic Thin‐Film Transistors with π‐Junction Gold Nanoparticles , 2014 .
[179] Junjun Tan,et al. Preparation of conductive Cu patterns by directly writing using nano-Cu ink , 2014 .
[180] Paolo Lugli,et al. Fully-sprayed and flexible organic photodiodes with transparent carbon nanotube electrodes. , 2014, ACS applied materials & interfaces.
[181] Hyun-Jun Hwang,et al. Highly conductive copper nano/microparticles ink via flash light sintering for printed electronics , 2014, Nanotechnology.
[182] Sang-Ho Lee,et al. Rapid sintering of copper nano ink using a laser in air , 2014 .
[183] S. Cartmell,et al. Conductive polymers: towards a smart biomaterial for tissue engineering. , 2014, Acta biomaterialia.
[184] Xu Chen,et al. Characterizations of Nanosilver Joints by Rapid Sintering at Low Temperature for Power Electronic Packaging , 2014, IEEE Transactions on Device and Materials Reliability.
[185] Yoonhyun Kim,et al. A self-reducible and alcohol-soluble copper-based metal-organic decomposition ink for printed electronics. , 2014, ACS applied materials & interfaces.
[186] Q. Pei,et al. Silver nanowire percolation network soldered with graphene oxide at room temperature and its application for fully stretchable polymer light-emitting diodes. , 2014, ACS nano.
[187] Hyunkyoo Kang,et al. Direct intense pulsed light sintering of inkjet-printed copper oxide layers within six milliseconds. , 2014, ACS applied materials & interfaces.
[188] R. Sun,et al. Facile preparation of monodisperse, impurity-free, and antioxidation copper nanoparticles on a large scale for application in conductive ink. , 2014, ACS applied materials & interfaces.
[189] M. Jha,et al. Room temperature synthesis of a copper ink for the intense pulsed light sintering of conductive copper films. , 2013, ACS applied materials & interfaces.
[190] F. Egitto,et al. Highly conductive lines by plasma-induced conversion of inkjet-printed silver nitrate traces , 2013 .
[191] Francisco Molina-Lopez,et al. Towards fully printed capacitive gas sensors on flexible PET substrates based on Ag interdigitated transducers with increased stability , 2013 .
[192] Markus Hösel,et al. Comparison of Fast Roll‐to‐Roll Flexographic, Inkjet, Flatbed, and Rotary Screen Printing of Metal Back Electrodes for Polymer Solar Cells , 2013 .
[193] M. Hsieh,et al. Electrically conductive lines on cellulose nanopaper for flexible electrical devices. , 2013, Nanoscale.
[194] K. Shinozaki,et al. Cu salt ink formulation for printed electronics using photonic sintering. , 2013, Langmuir : the ACS journal of surfaces and colloids.
[195] Matti Mäntysalo,et al. The Effect of Laser Sintering Process Parameters on Cu Nanoparticle Ink in Room Conditions , 2013 .
[196] Y. Choa,et al. The characteristics of Cu nanopaste sintered by atmospheric-pressure plasma , 2013 .
[197] Yong-Won Song,et al. Cu ion ink for a flexible substrate and highly conductive patterning by intensive pulsed light sintering. , 2013, ACS applied materials & interfaces.
[198] Yunxia Jin,et al. Copper nanoparticles: aqueous phase synthesis and conductive films fabrication at low sintering temperature. , 2013, ACS applied materials & interfaces.
[199] Kenjiro Fukuda,et al. Profile control of inkjet printed silver electrodes and their application to organic transistors. , 2013, ACS applied materials & interfaces.
[200] Jang‐Ung Park,et al. Air-stable, surface-oxide free Cu nanoparticles for highly conductive Cu ink and their application to printed graphene transistors , 2013 .
[201] Hyun-Jun Hwang,et al. In situ monitoring of flash-light sintering of copper nanoparticle ink for printed electronics , 2012, Nanotechnology.
[202] Shuji Tanaka,et al. Electrically conductive copper film prepared at low temperature by thermal decomposition of copper amine complexes with various amines , 2012 .
[203] Ryota Watanabe,et al. A new one-pot method for the synthesis of Cu nanoparticles for low temperature bonding , 2012 .
[204] Kenji Shinozaki,et al. Strongly adhesive and flexible transparent silver nanowire conductive films fabricated with a high-intensity pulsed light technique , 2012 .
[205] Yong-Ho Choa,et al. Adhesion enhancement of ink-jet printed conductive copper patterns on a flexible substrate , 2012 .
[206] Miaofang Chi,et al. Synthesis of oxidation-resistant cupronickel nanowires for transparent conducting nanowire networks. , 2012, Nano letters.
[207] J. Zou,et al. Synthesis, growth mechanism and thermal stability of copper nanoparticles encapsulated by multi-layer graphene , 2012 .
[208] Yi Cui,et al. Self-limited plasmonic welding of silver nanowire junctions. , 2012, Nature materials.
[209] Martti Toivakka,et al. IR-sintering of ink-jet printed metal-nanoparticles on paper , 2012 .
[210] Myeongkyu Lee,et al. Comparative studies on thermal and laser sintering for highly conductive Cu films printable on plastic substrate , 2012 .
[211] Jae-Ho Lee,et al. Effect of copper concentration in printable copper inks on film fabrication , 2012 .
[212] Jongwook Park,et al. A Novel Solution‐Stamping Process for Preparation of a Highly Conductive Aluminum Thin Film , 2011, Advanced materials.
[213] S. Ko,et al. One-Step Fabrication of Copper Electrode by Laser-Induced Direct Local Reduction and Agglomeration of Copper Oxide Nanoparticle , 2011 .
[214] B. Wiley,et al. The Synthesis and Coating of Long, Thin Copper Nanowires to Make Flexible, Transparent Conducting Films on Plastic Substrates , 2011, Advanced materials.
[215] Myeongkyu Lee,et al. Laser sintering of Cu paste film printed on polyimide substrate , 2011 .
[216] Hu Anming,et al. Preparation of PVP coated Cu NPs and the application for low-temperature bonding , 2011 .
[217] Yong-Won Song,et al. Multi-pulsed white light sintering of printed Cu nanoinks , 2011, Nanotechnology.
[218] J. Lewis,et al. Pen‐on‐Paper Flexible Electronics , 2011, Advanced materials.
[219] A. Yabuki,et al. Low-temperature synthesis of copper conductive film by thermal decomposition of copper–amine complexes , 2011 .
[220] Jooho Moon,et al. Effect of carboxylic acid on sintering of inkjet-printed copper nanoparticulate films. , 2011, ACS applied materials & interfaces.
[221] Shlomo Magdassi,et al. Conductive inks with a "built-in" mechanism that enables sintering at room temperature. , 2011, ACS nano.
[222] Sunho Jeong,et al. Stable aqueous based Cu nanoparticle ink for printing well-defined highly conductive features on a plastic substrate. , 2011, Langmuir : the ACS journal of surfaces and colloids.
[223] Qibing Pei,et al. Highly Flexible Silver Nanowire Electrodes for Shape‐Memory Polymer Light‐Emitting Diodes , 2011, Advanced materials.
[224] Jongryoul Kim,et al. The effect of reduction atmospheres on the sintering behaviors of inkjet-printed Cu interconnectors , 2010 .
[225] A. Yabuki,et al. Electrical conductivity of copper nanoparticle thin films annealed at low temperature , 2010 .
[226] Jan G. Korvink,et al. Printed electronics: the challenges involved in printing devices, interconnects, and contacts based on inorganic materials , 2010 .
[227] S. Magdassi,et al. Copper Nanoparticles for Printed Electronics: Routes Towards Achieving Oxidation Stability , 2010, Materials.
[228] Y. Choa,et al. Effect of Complex Agent on Characteristics of Copper Conductive Pattern Formed by Ink-jet Printing , 2010 .
[229] Wei Zhang,et al. Printed, sub-3V digital circuits on plastic from aqueous carbon nanotube inks. , 2010, ACS nano.
[230] Seonhee Jang,et al. Sintering of inkjet printed copper nanoparticles for flexible electronics , 2010 .
[231] H. Thomas Hahn,et al. Intense pulsed light sintering of copper nanoink for printed electronics , 2009 .
[232] Jing Li,et al. Carbon-coated copper nanoparticles: synthesis, characterization and optical properties , 2009 .
[233] Derek Graham,et al. Conductive Copper and Nickel Lines via Reactive Inkjet Printing , 2009, NIP & Digital Fabrication Conference.
[234] Li Yang,et al. A Novel Conformal RFID-Enabled Module Utilizing Inkjet-Printed Antennas and Carbon Nanotubes for Gas-Detection Applications , 2009, IEEE Antennas and Wireless Propagation Letters.
[235] Shlomo Magdassi,et al. Formation of air-stable copper–silver core–shell nanoparticles for inkjet printing , 2009 .
[236] Mark A.M. Leenen,et al. Printable electronics: flexibility for the future , 2009 .
[237] A. Purwanto,et al. Synthesis and film deposition of Ni nanoparticles for base metal electrode applications , 2009 .
[238] Yoon-Hyun Kim,et al. A low-cure-temperature copper nano ink for highly conductive printed electrodes , 2009 .
[239] W. Dressick,et al. Selective electroless metallization of patterned polymeric films for lithography applications. , 2009, ACS applied materials & interfaces.
[240] Jang Sub Kim,et al. Ink-jet printing of cu-ag-based highly conductive tracks on a transparent substrate. , 2009, Langmuir : the ACS journal of surfaces and colloids.
[241] W. Stark,et al. Graphene-stabilized copper nanoparticles as an air-stable substitute for silver and gold in low-cost ink-jet printable electronics , 2008, Nanotechnology.
[242] Youngil Lee,et al. Large-scale synthesis of copper nanoparticles by chemically controlled reduction for applications of inkjet-printed electronics , 2008, Nanotechnology.
[243] T. Someya,et al. A Rubberlike Stretchable Active Matrix Using Elastic Conductors , 2008, Science.
[244] Younan Xia,et al. Controlling the Thickness of the Surface Oxide Layer on Cu Nanoparticles for the Fabrication of Conductive Structures by Ink‐Jet Printing , 2008 .
[245] R. Street,et al. Thermal cure effects on electrical performance of nanoparticle silver inks , 2007 .
[246] Jang Sub Kim,et al. Direct writing of copper conductive patterns by ink-jet printing , 2007 .
[247] K. Suganuma,et al. Novel method for room temperature sintering of Ag nanoparticle paste in air , 2007 .
[248] D. Lewis,et al. Ink-jet fabrication of electronic components , 2007 .
[249] J. Jacobson,et al. Nanoscale patterning on insulating substrates by critical energy electron beam lithography. , 2006, Nano letters.
[250] Yi Su,et al. Inkjet-printed silver conductors using silver nitrate ink and their electrical contacts with conducting polymers , 2005 .
[251] Sari Johanna Kaipio,et al. Reduction of Copper Oxide Film to Elemental Copper , 2005 .
[252] R. German. Sintering densification for powder mixtures of varying distribution widths , 1992 .
[253] Evan G. Colgan,et al. Oxidation and protection in copper and copper alloy thin films , 1991 .
[254] G. Scherer. Viscous Sintering of a Bimodal Pore‐Size Distribution , 1984 .
[255] Wei-Yang Ma,et al. Synthesis of Antioxidative Conductive Copper Inks with Superior Adhesion. , 2018, Journal of Nanoscience and Nanotechnology.
[256] S. Nutt,et al. All-printed strain sensors: Building blocks of the aircraft structural health monitoring system , 2017 .
[257] Katsuaki Suganuma,et al. Introduction to Printed Electronics , 2014, Springer Briefs in Electrical and Computer Engineering.
[258] Yunxia Jin,et al. Copper carboxylate with different carbon chain lengths as metal–organic decomposition ink , 2013, Journal of Materials Science: Materials in Electronics.
[259] S. Vunnam,et al. Highly conductive short chain carboxylic acid encapsulated silver nanoparticle based inks for direct write technology applications , 2013 .
[260] H. Thomas Hahn,et al. Reactive Sintering of Copper Nanoparticles Using Intense Pulsed Light for Printed Electronics , 2011 .
[261] N D Robinson,et al. Organic materials for printed electronics. , 2007, Nature materials.
[262] Pascal Tristant,et al. Atmospheric pressure plasmas: A review , 2006 .
[263] S. Horikoshi,et al. Photocatalyzed degradation of polymers in aqueous semiconductor suspensions , 1999 .
[264] R. A. Bayles,et al. Small particle melting of pure metals , 1986 .