Experimental investigation on the effect of phase change materials on compressed air expansion in CAES plants

The integration of renewable energy in the electrical grid is challenging due to the intermittent and non-programmable generated electric power and to the transmission of peak power levels. Several energy storage technologies have been studied to find a solution to these issues. In particular, compressed air energy storage (CAES) plants work by pumping and storing air into a vessel or in an underground cavern; then when energy is needed, the pressurized air is expanded in an expansion turbine. Several CAES configurations have been proposed: diabatic, adiabatic and isothermal. The isothermal process seems to be the most promising to improve the overall efficiency. It differs from conventional CAES approaches as it employs near-isothermal compression and expansion. Currently, there are no commercial isothermal CAES implementations worldwide, but several methods are under investigation. In this paper, the use of phase change materials (PCM) for isothermal air expansion is discussed. Air expansion tests in presence of PCM were carried out in a high-pressure vessel in order to analyze the effect of PCM on the process. Results show that in presence of PCM near isothermal expansion conditions occur and therefore they affect positively the value of the obtainable expansion work.

[1]  Andreas Sumper,et al.  A review of energy storage technologies for wind power applications , 2012 .

[2]  Beatrice Castellani,et al.  Hydrate-based removal of carbon dioxide and hydrogen sulphide from biogas mixtures: Experimental investigation and energy evaluations , 2014 .

[3]  Elena Morini,et al.  Experimental investigations on scaled-up methane hydrate production with surfactant promotion: Energy considerations , 2014 .

[4]  Elena Morini,et al.  Clathrate Hydrates for Thermal Energy Storage in Buildings: Overview of Proper Hydrate-Forming Compounds , 2014 .

[5]  Carlos Rubio-Maya,et al.  Design optimization of a polygeneration plant fuelled by natural gas and renewable energy sources , 2011 .

[6]  D. Favrat,et al.  Energy and exergy analysis of a micro-compressed air energy storage and air cycle heating and cooling system , 2008 .

[7]  Young-Min Kim,et al.  Potential and Evolution of Compressed Air Energy Storage: Energy and Exergy Analyses , 2012, Entropy.

[8]  Beatrice Castellani,et al.  A Cylindrical Molten Carbonate Fuel Cell Supplied with Landfill Biogas , 2013 .

[9]  Georges Garabeth Salgi,et al.  The role of compressed air energy storage (CAES) in future sustainable energy systems , 2009 .

[10]  Andrea Nicolini,et al.  A Cylindrical Small Size Molten Carbonate Fuel Cell: Experimental Investigation on Materials and Improving Performance Solutions , 2009 .

[11]  Ying Wu,et al.  A Novel Hybrid-Fuel Storage System of Compressed Air Energy for China , 2014 .

[12]  Eirik Mørkved Helsingen.  Adiabatic compressed air energy storage , 2015 .

[13]  Andrea Nicolini,et al.  Experimental Investigation on a Novel Electrolyte Configuration for Cylindrical Molten Carbonate Fuel Cells , 2011 .

[14]  Gaetano Zizzo,et al.  Multi-objective optimized management of electrical energy storage systems in an islanded network with renewable energy sources under different design scenarios , 2014 .

[15]  Martin Koller,et al.  Advanced Adiabatic Compressed Air Energy Storage for the Integration of Wind Energy , 2004 .

[16]  Filip Johnsson,et al.  Fossil Fuels: Climate Change and Security of Supply , 2012 .

[17]  Luis M. Serra,et al.  Polygeneration and efficient use of natural resources , 2009 .