Constitutive modeling of ultra-high molecular weight polyethylene under large-deformation and cyclic loading conditions.

[1]  Miroslav Šilhavý,et al.  The Mechanics and Thermodynamics of Continuous Media , 2002 .

[2]  Mary C. Boyce,et al.  Large strain time-dependent behavior of filled elastomers , 2000 .

[3]  C. Rimnac,et al.  Cyclic steady state stress-strain behavior of UHMW polyethylene. , 2000, Biomaterials.

[4]  A. Edidin,et al.  Advances in the processing, sterilization, and crosslinking of ultra-high molecular weight polyethylene for total joint arthroplasty. , 1999, Biomaterials.

[5]  C. Jewett,et al.  The yielding, plastic flow, and fracture behavior of ultra-high molecular weight polyethylene used in total joint replacements. , 1998, Biomaterials.

[6]  Mary C. Boyce,et al.  Constitutive modeling of the large strain time-dependent behavior of elastomers , 1998 .

[7]  D. Bartel,et al.  Postirradiation Aging Affects Stress and Strain in Polyethylene Components , 1998, Clinical orthopaedics and related research.

[8]  D L Bartel,et al.  Residual stresses in ultra‐high molecular weight polyethylene loaded cyclically by a rigid moving indenter in nonconforming geometries , 1998, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[9]  T. Brown,et al.  Effects of Acetabular Component Lip Design on Dislocation Resistance in THA , 1997, Advances in Bioengineering.

[10]  T. Santner,et al.  Exponential model for the tensile true stress‐strain behavior of as‐irradiated and oxidatively degraded ultra high molecular weight polyethylene , 1996, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[11]  K Yasuda,et al.  Contact analysis of ultrahigh molecular weight polyethylene articular plate in artificial knee joint during gait movement. , 1996, Journal of biomechanical engineering.

[12]  M. Kitagawa,et al.  Stress-strain curves for solid polymers , 1995 .

[13]  D. Bartel,et al.  The effect of conformity on stresses in dome-shaped polyethylene patellar components. , 1995, Clinical orthopaedics and related research.

[14]  D. Bartel,et al.  Stresses in polyethylene components of contemporary total knee replacements. , 1995, Clinical orthopaedics and related research.

[15]  A. Wang,et al.  Role of cyclic plastic deformation in the wear of UHMWPE acetabular cups. , 1995, Journal of biomedical materials research.

[16]  M. Boyce,et al.  A constitutive model for the nonlinear viscoelastic viscoplastic behavior of glassy polymers , 1995 .

[17]  C. G'sell,et al.  Evolution of microstructure in semi-crystalline polymers under large plastic deformation , 1994 .

[18]  R. E. Jensen,et al.  The correlation between fusion defects and damage in tibial polyethylene bearings. , 1994, Clinical orthopaedics and related research.

[19]  S. Ahzi,et al.  Simulation of large strain plastic deformation and texture evolution in high density polyethylene , 1993 .

[20]  M. Boyce,et al.  A three-dimensional constitutive model for the large stretch behavior of rubber elastic materials , 1993 .

[21]  A. Argon,et al.  Morphological alterations during texture-producing plastic plane strain compression of high-density polyethylene , 1992 .

[22]  A. Dahoun,et al.  Video-controlled tensile testing of polymers and metals beyond the necking point , 1992 .

[23]  A. Argon,et al.  Evolution of the crystalline texture of high-density polyethylene during uniaxial compression , 1992 .

[24]  M. Boyce,et al.  Large inelastic deformation of glassy polymers. part I: rate dependent constitutive model , 1988 .

[25]  D. Howie,et al.  A rat model of resorption of bone at the cement-bone interface in the presence of polyethylene wear particles. , 1988, The Journal of bone and joint surgery. American volume.

[26]  D. Parks,et al.  Mechanical properties of compliant composite particles effective in toughening glassy polymers , 1987 .

[27]  D. Bartel,et al.  The effect of conformity, thickness, and material on stresses in ultra-high molecular weight components for total joint replacement. , 1986, The Journal of bone and joint surgery. American volume.

[28]  C. Nelson,et al.  Granulomatous reaction and cystic bony destruction associated with high wear rate in a total knee prosthesis. , 1985, Clinical orthopaedics and related research.

[29]  Christian G'Sell,et al.  Application of the plane simple shear test for determination of the plastic behaviour of solid polymers at large strains , 1983 .

[30]  H. Amstutz,et al.  The pathology of failed total joint arthroplasty. , 1982, Clinical orthopaedics and related research.

[31]  J. Jonas,et al.  Determination of the plastic behaviour of solid polymers at constant true strain rate , 1979 .

[32]  A. Argon.  A theory for the low-temperature plastic deformation of glassy polymers , 1973 .

[33]  A. Peterlin,et al.  Molecular model of drawing polyethylene and polypropylene , 1971 .

[34]  R. Hall.  Wear of polyethylene acetabular components in total hip arthroplasty. An analysis of one hundred and twenty-eight components retrieved at autopsy or revision operations. , 1998, The Journal of bone and joint surgery. American volume.

[35]  D. FitzPatrick,et al.  Critical assessment of methods for evaluating JIC for a medical grade ultra high molecular weight polyethylene , 1997 .

[36]  J. PetrellaA,et al.  The effect of femoral component rotation on the stresses in an UHMWPE patellar prosthesis. A finite element study. , 1997 .

[37]  Mary C. Boyce,et al.  Effects of strain rate, temperature and thermomechanical coupling on the finite strain deformation of glassy polymers , 1995 .

[38]  J. Rodríguez‐Cabello,et al.  Rheo-optical Raman study of chain deformation in uniaxially stretched bulk polyethylene , 1995 .

[39]  A. Argon,et al.  Review Structure and plastic deformation of polyethylene , 1994 .

[40]  A. Argon,et al.  Structure and plastic deformation of polyethylene , 1994 .

[41]  Mary C. Boyce,et al.  Evolution of plastic anisotropy in amorphous polymers during finite straining , 1993 .

[42]  E. Nakanishi,et al.  Orientation behaviour of crystallites in cylindrical polyethylene rods under tension-torsion combined stress , 1993 .

[43]  M. Kitagawa,et al.  Stress-strain behaviour at finite strains for various strain paths in polyethylene , 1992 .

[44]  M. Boyce,et al.  On the kinematics of finite strain plasticity , 1989 .

[45]  T. Hughes.  Numerical Implementation of Constitutive Models: Rate-Independent Deviatoric Plasticity , 1984 .

[46]  Siavouche Nemat-Nasser,et al.  Theoretical foundation for large-scale computations for nonlinear material behavior , 1984 .

[47]  R. E. Robertson,et al.  The Physics of Glassy Polymers , 1973 .

[48]  A. Peterlin,et al.  Plastic deformation of polyethylene II. Change of mechanical properties during drawing , 1971 .

[49]  P. Vincent.  The necking and cold-drawing of rigid plastics , 1960 .