A review of selective laser melting of aluminum alloys: Processing, microstructure, property and developing trends

Abstract Selective laser melting (SLM) is an attractive rapid prototyping technology for the fabrication of metallic components with complex structure and high performance. Aluminum alloy, one of the most pervasive structural materials, is well known for high specific strength and good corrosion resistance. But the poor laser formability of aluminum alloy restricts its application. There are problems such as limited processable materials, immature process conditions and metallurgical defects on SLM processing aluminum alloys. Some efforts have been made to solve the above problems. This paper discusses the current research status both related to the scientific understanding and technology applications. The paper begins with a brief introduction of basic concepts of aluminum alloys and technology characterization of laser selective melting. In addition, solidification theory of SLM process and formation mechanism of metallurgical defects are discussed. Then, the current research status of microstructure, properties and heat treatment of SLM processing aluminum alloys is systematically reviewed respectively. Lastly, a future outlook is given at the end of this review paper.

[1]  J. Eckert,et al.  Formation of metastable cellular microstructures in selective laser melted alloys , 2017 .

[2]  P. Alam.  ‘G’ , 2021, Composites Engineering: An A–Z Guide.

[3]  R. Trivedi,et al.  Solidification microstructures and solid-state parallels: Recent developments, future directions , 2009 .

[4]  Konda Gokuldoss Prashanth,et al.  Simultaneous enhancements of strength and toughness in an Al-12Si alloy synthesized using selective laser melting , 2016 .

[5]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[6]  S. L. Semiatin,et al.  The effect of laser power and traverse speed on microstructure, porosity, and build height in laser-deposited Ti-6Al-4V , 2000 .

[7]  A. R. Daud,et al.  Characterization of Oxide Growth on Surface of Al-Mg-Si Welded Joint , 2014 .

[8]  S. Kaierle,et al.  In Situ Observation of Solidification Conditions in Pulsed Laser Welding of AL6082 Aluminum Alloys to Evaluate Their Impact on Hot Cracking Susceptibility , 2015, Metallurgical and Materials Transactions A.

[9]  Thomas Tröster,et al.  Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting , 2015, Metallurgical and Materials Transactions A.

[10]  I. Ashcroft,et al.  The microstructure and mechanical properties of selectively laser melted AlSi10Mg: The effect of a conventional T6-like heat treatment , 2016 .

[11]  Selcuk Mistikoglu,et al.  Recent Developments in Friction Stir Welding of Al-alloys , 2014, Journal of Materials Engineering and Performance.

[12]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[13]  Kenneth W. Dalgarno,et al.  Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders , 2011 .

[14]  H. Liao,et al.  Microstructure and wear behavior of in-situ hypereutectic Al–high Si alloys produced by selective laser melting , 2016 .

[15]  T. Pollock,et al.  3D printing of high-strength aluminium alloys , 2017, Nature.

[16]  Suyitno,et al.  Mechanical properties in the semi-solid state and hot tearing of aluminium alloys , 2004 .

[17]  Changmeng Liu,et al.  Parameter optimization for Ti-47Al-2Cr-2Nb in selective laser melting based on geometric characteristics of single scan tracks , 2017 .

[18]  Z. Zhang,et al.  Effects of heat treatment on the microstructure and mechanical properties of AA2618 DC cast alloy , 2014 .

[19]  Adv , 2019, International Journal of Pediatrics and Adolescent Medicine.

[20]  F. Walther,et al.  Influence of Process Parameters on the Quality of Aluminium Alloy EN AW 7075 Using Selective Laser Melting (SLM) , 2016 .

[21]  Di Wang,et al.  Accuracy and density optimization in directly fabricating customized orthodontic production by selective laser melting , 2012 .

[22]  R. Hague,et al.  A Study on the Laser Spatter and the Oxidation Reactions During Selective Laser Melting of 316L Stainless Steel, Al-Si10-Mg, and Ti-6Al-4V , 2015, Metallurgical and Materials Transactions A.

[23]  D. Gu,et al.  Selective laser melting additive manufactured Inconel 718 superalloy parts: High-temperature oxidation property and its mechanisms , 2014 .

[24]  D. Gu,et al.  Thermal behavior and densification mechanism during selective laser melting of copper matrix composites: Simulation and experiments , 2014 .

[25]  Jean-Pierre Kruth,et al.  Microstructural investigation of Selective Laser Melting 316L stainless steel parts exposed to laser re-melting , 2011 .

[26]  Andrey V. Gusarov,et al.  Single track formation in selective laser melting of metal powders , 2010 .

[27]  P. Alam.  ‘T’ , 2021, Composites Engineering: An A–Z Guide.

[28]  Guanqun Yu,et al.  Porosity evolution and its thermodynamic mechanism of randomly packed powder-bed during selective laser melting of Inconel 718 alloy , 2017 .

[29]  Yuebin Guo,et al.  A multiscale modeling approach for fast prediction of part distortion in selective laser melting , 2016 .

[30]  M. Rappaz,et al.  The development of nucleation controlled microstructures during laser treatment of Al-Si alloys , 1996 .

[31]  K. Prabhu,et al.  Modification of eutectic silicon in Al–Si alloys , 2008 .

[32]  Thomas Tröster,et al.  On the fatigue crack growth behavior in 316L stainless steel manufactured by selective laser melting , 2014 .

[33]  J.-P. Kruth,et al.  Processing AlSi10Mg by selective laser melting: parameter optimisation and material characterisation , 2015 .

[34]  D. Gu,et al.  Selective laser melting additive manufacturing of Inconel 718 superalloy parts: Densification, microstructure and properties , 2014 .

[35]  Ming Gao,et al.  Layer thickness dependence of performance in high-power selective laser melting of 1Cr18Ni9Ti stainless steel , 2015 .

[36]  Moataz M. Attallah,et al.  The influence of the laser scan strategy on grain structure and cracking behaviour in SLM powder-bed fabricated nickel superalloy , 2014 .

[37]  Jean-Raymond Abrial,et al.  On B , 1998, B.

[38]  Zhen Chen,et al.  The AlSi10Mg samples produced by selective laser melting: single track, densification, microstructure and mechanical behavior , 2017 .

[39]  Yong-qiang Yang,et al.  Process optimization and mechanical property evolution of AlSiMg0.75 by selective laser melting , 2018 .

[40]  Xinjin Cao,et al.  Research and Progress in Laser Welding of Wrought Aluminum Alloys. II. Metallurgical Microstructures, Defects, and Mechanical Properties , 2003 .

[41]  Guian Qian,et al.  Investigation of high cycle and Very-High-Cycle Fatigue behaviors for a structural steel with smooth and notched specimens , 2010 .

[42]  Wei Teufelsdreck,et al.  Chin , 2021, COMARCA PERDIDA.

[43]  Chunxiang Cui,et al.  Review on Fabrication Methods of in situ Metal Matrix Composites , 2009 .

[44]  T. Nakamoto,et al.  Effect of silicon content on densification, mechanical and thermal properties of Al-xSi binary alloys fabricated using selective laser melting , 2017 .

[45]  H. Liao,et al.  Morphology evolution mechanism of single tracks of FeAl intermetallics in selective laser melting , 2012 .

[46]  Bin Luo,et al.  Recent progress on visible light responsive heterojunctions for photocatalytic applications , 2017 .

[47]  K. Osakada,et al.  Residual Stress within Metallic Model Made by Selective Laser Melting Process , 2004 .

[48]  R. Poprawe,et al.  Laser additive manufacturing of metallic components: materials, processes and mechanisms , 2012 .

[49]  Zhiheng Hu,et al.  Effect of Zirconium addition on crack, microstructure and mechanical behavior of selective laser melted Al-Cu-Mg alloy , 2017 .

[50]  D. Apelian,et al.  Fatigue crack growth mechanisms at the microstructure scale in Al–Si–Mg cast alloys: Mechanisms in the near-threshold regime , 2006 .

[51]  Francesco Trevisan,et al.  On the Selective Laser Melting (SLM) of the AlSi10Mg Alloy: Process, Microstructure, and Mechanical Properties , 2017, Materials.

[52]  H. Liao,et al.  An investigation on selective laser melting of Al-Cu-Fe-Cr quasicrystal: From single layer to multilayers , 2017 .

[53]  W. S. Miller,et al.  Recent development in aluminium alloys for aerospace applications , 2000 .

[54]  R. Xiao,et al.  Problems and issues in laser beam welding of aluminum–lithium alloys , 2014 .

[55]  D. Gu,et al.  Effect of metal vaporization behavior on keyhole-mode surface morphology of selective laser melted composites using different protective atmospheres , 2015 .

[56]  L. Murr,et al.  Metal Fabrication by Additive Manufacturing Using Laser and Electron Beam Melting Technologies , 2012 .

[57]  Wai Yee Yeong,et al.  Laser and electron‐beam powder‐bed additive manufacturing of metallic implants: A review on processes, materials and designs , 2016, Journal of orthopaedic research : official publication of the Orthopaedic Research Society.

[58]  G. Çam,et al.  Friction stir welded structural materials: beyond Al-alloys , 2011 .

[59]  J.Th.M. De Hosson,et al.  Functionally graded materials produced by laser cladding , 2000 .

[60]  Konda Gokuldoss Prashanth,et al.  Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment , 2014 .

[61]  Wei-Chin Huang,et al.  Microstructure-controllable Laser Additive Manufacturing Process for Metal Products , 2014 .

[62]  I. Yadroitsava,et al.  Energy input effect on morphology and microstructure of selective laser melting single track from metallic powder , 2013 .

[63]  Wei Qingsong,et al.  Effect of molten pool boundaries on the mechanical properties of selective laser melting parts , 2014 .

[64]  Ming Gao,et al.  The microstructure and mechanical properties of deposited-IN718 by selective laser melting , 2012 .

[65]  Tong Wen.  On a new concept of rotary draw bend-die adaptable for bending tubes with multiple outer diameters under non-mandrel condition , 2014 .

[66]  Lai‐Chang Zhang,et al.  Gradient in microstructure and mechanical property of selective laser melted AlSi10Mg , 2018 .

[67]  Radovan Kovacevic,et al.  Finite element modeling of friction stir welding—thermal and thermomechanical analysis , 2003 .

[68]  D. Raabe,et al.  Precipitation Reactions in Age-Hardenable Alloys During Laser Additive Manufacturing , 2016 .

[69]  Lars-Erik Lindgren,et al.  Numerical modelling of welding , 2006 .

[70]  Joaquim Ciurana,et al.  Study of the Pore Formation on CoCrMo Alloys by Selective Laser Melting Manufacturing Process , 2013 .

[71]  F. Klocke,et al.  Consolidation phenomena in laser and powder-bed based layered manufacturing , 2007 .

[72]  N. Coniglio,et al.  Initiation and growth mechanisms for weld solidification cracking , 2013 .

[73]  Moataz M. Attallah,et al.  Mesoscale modelling of selective laser melting: Thermal fluid dynamics and microstructural evolution , 2017 .

[74]  Zach DeVito,et al.  Opt , 2017 .

[75]  D. Qiu,et al.  The nucleation crystallography and wettability of Mg grains on active Al2Y inoculants in an Mg–10 wt% Y Alloy , 2014 .

[76]  Christopher J. Sutcliffe,et al.  Selective laser melting of aluminium components , 2011 .

[77]  P. Li,et al.  Microstructure and Mechanical Properties of Pulse MIG Welded 6061/A356 Aluminum Alloy Dissimilar Butt Joints , 2016 .

[78]  Lai‐Chang Zhang,et al.  The effect of atmosphere on the structure and properties of a selective laser melted Al-12Si alloy , 2014 .

[79]  Sainan Cao,et al.  Effects of laser processing parameters on thermal behavior and melting/solidification mechanism during selective laser melting of TiC/Inconel 718 composites , 2016 .

[80]  M. Fousová,et al.  Changes in the microstructure and mechanical properties of additively manufactured AlSi10Mg alloy after exposure to elevated temperatures , 2018 .

[81]  R. de Crespigny.  Wei , 2019, The Cambridge History of China.

[82]  Wilfried Kurz,et al.  Epitaxial laser metal forming: analysis of microstructure formation , 1999 .

[83]  M. Fu,et al.  Comparative study on local and global mechanical properties of bobbin tool and conventional friction stir welded 7085-T7452 aluminum thick plate , 2017 .

[84]  Yong Pan,et al.  Solidification crack susceptibility of aluminum alloy weld metals , 2006 .

[85]  J. Kruth,et al.  Fine-structured aluminium products with controllable texture by selective laser melting of pre-alloyed AlSi10Mg powder , 2013 .

[86]  Danna Zhou,et al.  d. , 1840, Microbial pathogenesis.

[87]  D. R. White,et al.  Current issues and problems in laser welding of automotive aluminium alloys , 1999 .

[88]  Yang Liu,et al.  A study on the residual stress during selective laser melting (SLM) of metallic powder , 2016 .

[89]  Kang Yang,et al.  Solid-state additive manufacturing and repairing by cold spraying: A review , 2017 .

[90]  Wilhelm Meiners,et al.  Microstructure characteristics and formation mechanisms of in situ WC cemented carbide based hardmetals prepared by Selective Laser Melting , 2010 .

[91]  J. Kruth,et al.  Manufacturing by combining Selective Laser Melting and Selective Laser Erosion/laser re-melting , 2011 .

[92]  Yan Zhou,et al.  Effect of heat treatment on CuCrZr alloy fabricated by selective laser melting: Microstructure evolution, mechanical properties and fracture mechanism , 2016, Journal of Materials Research and Technology.

[93]  H. Ye,et al.  An overview of the development of Al-Si-Alloy based material for engine applications , 2003 .

[94]  P. Alam.  ‘L’ , 2021, Composites Engineering: An A–Z Guide.

[95]  Christopher J. Sutcliffe,et al.  Selective laser melting of high aspect ratio 3D nickel–titanium structures two way trained for MEMS applications , 2008 .

[96]  H. Fu,et al.  Effect of Melt Superheating Treatment on Directional Solidification Interface Morphology of Multi-component Alloy , 2011 .

[97]  C. Davidson,et al.  Solidification and precipitation behaviour of Al-Si-Mg casting alloys , 2001 .

[98]  W. Hwang,et al.  Effects of an even secondary cooling mode on the temperature and stress fields of round billet continuous casting steel , 2015 .

[99]  H. Haubeck.  COMP , 2019, Springer Reference Medizin.

[100]  L. Froyen,et al.  Fundamentals of Selective Laser Melting of alloyed steel powders , 2006 .

[101]  Brent Stucker,et al.  Influence of Defects on Mechanical Properties of Ti-6Al-4V Components Produced by Selective Laser Melting and Electron Beam Melting , 2015 .

[102]  F. Walther,et al.  Very high cycle fatigue and fatigue crack propagation behavior of selective laser melted AlSi12 alloy , 2017 .

[103]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[104]  Wei Liu,et al.  Balling phenomena in selective laser melted tungsten , 2015 .

[105]  J. Kruth,et al.  Changing the alloy composition of Al7075 for better processability by selective laser melting , 2016 .

[106]  M. Savalani,et al.  Microstructure and mechanical properties of selective laser melted magnesium , 2011 .

[107]  E. A. Starke,et al.  Progress in structural materials for aerospace systems , 2003 .

[108]  Reinhart Poprawe,et al.  Densification behavior, microstructure evolution, and wear performance of selective laser melting processed commercially pure titanium , 2012 .

[109]  Remo Guidieri.  Res , 1995, RES: Anthropology and Aesthetics.

[110]  E. O. Olakanmi,et al.  A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: Processing, microstructure, and properties , 2015 .

[111]  David L. Bourell,et al.  Selective laser sintering of metals and ceramics , 1992 .

[112]  Jan Bültmann,et al.  High Power Selective Laser Melting (HP SLM) of Aluminum Parts , 2011 .

[113]  Zhiquan Chen,et al.  Influence of electric field on the quenched-in vacancy and solute clustering during early stage ageing of Al-Cu alloy , 2017 .

[114]  F. H. Samuel,et al.  Porosity and the fatigue behavior of hypoeutectic and hypereutectic aluminum–silicon casting alloys , 2008 .

[115]  Richard M. Everson,et al.  Finite element simulation of the temperature and stress fields in single layers built without-support in selective laser melting , 2013 .

[116]  Zhaohui Huang,et al.  A selective laser melting and solution heat treatment refined Al-12Si alloy with a controllable ultrafine eutectic microstructure and 25% tensile ductility , 2015 .

[117]  J. Kruth,et al.  Residual stresses in selective laser sintering and selective laser melting , 2006 .

[118]  Carsten,et al.  SCR , 2020, Catalysis from A to Z.

[119]  Lin Liu,et al.  3D printing of crack-free high strength Zr-based bulk metallic glass composite by selective laser melting , 2017 .

[120]  K. Ohori,et al.  Grain refinement of high purity aluminium by asymmetric rolling , 2000 .

[121]  Jamshid Sabbaghzadeh,et al.  The relation between liquation and solidification cracks in pulsed laser welding of 2024 aluminium alloy , 2009 .

[122]  Sie Chin Tjong,et al.  Microstructural and mechanical characteristics of in situ metal matrix composites , 2000 .

[123]  Chandrika Kamath,et al.  Observation of keyhole-mode laser melting in laser powder-bed fusion additive manufacturing , 2014 .

[124]  D. Bourell,et al.  A Novel Processing Approach for Additive Manufacturing of Commercial Aluminum Alloys , 2016 .

[125]  E. O. Olakanmi.  Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: Effect of processing conditions and powder properties , 2013 .

[126]  Wei Wang,et al.  Selective laser melting of AlSi10Mg alloy: Process optimisation and mechanical properties development , 2015, Materials & Design (1980-2015).

[127]  Chor Yen Yap,et al.  Review of selective laser melting : materials and applications , 2015 .

[128]  Sunghak Lee,et al.  Analysis and prevention of cracking during strip casting of AISI 304 stainless steel , 2001 .

[129]  K. Nogita,et al.  Eutectic nucleation in Al-Si alloys , 2004 .

[130]  J. Eckert,et al.  Selective laser melting of Al-Zn-Mg-Cu: Heat treatment, microstructure and mechanical properties , 2017 .

[131]  Haihong Zhu,et al.  Microstructure prediction of selective laser melting AlSi10Mg using finite element analysis , 2018 .

[132]  Antonio Domenico Ludovico,et al.  3D Finite Element Analysis in the selective laser melting process , 2011 .

[133]  Di Wang,et al.  Investigation into spatter behavior during selective laser melting of AISI 316L stainless steel powder , 2015 .

[134]  Thomas de Quincey.  [C] , 2000, The Works of Thomas De Quincey, Vol. 1: Writings, 1799–1820.

[135]  Reinhart Poprawe,et al.  Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg , 2015 .

[136]  J. T. Staley,et al.  Application of modern aluminum alloys to aircraft , 1996 .

[137]  W. Woo,et al.  Evaluation of the stress-strain relationship of constituent phases in AlSi10Mg alloy produced by selective laser melting using crystal plasticity FEM , 2017 .

[138]  J. H. Sokolowski,et al.  The effect of average cooling rates on the microstructure of the Al–20% Si high pressure die casting alloy used for monolithic cylinder blocks , 2008 .

[139]  M. Kramer,et al.  Superheat-dependent microstructure of molten Al–Si alloys of different compositions studied by small angle neutron scattering , 2013 .

[140]  G. G. Stokes.  "J." , 1890, The New Yale Book of Quotations.

[141]  H. Liao,et al.  Macrosegregation mechanism of primary silicon phase in selective laser melting hypereutectic Al – High Si alloy , 2016 .

[142]  Mihai Stoica,et al.  Processing metallic glasses by selective laser melting , 2013 .

[143]  H. Hou,et al.  Concentration and fluid flow effects on kinetics, dendrite remelting and stress accumulation upon rapid solidification of deeply undercooled alloys , 2018 .

[144]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[145]  T. Nakamoto,et al.  Microstructures and mechanical properties of A356 (AlSi7Mg0.3) aluminum alloy fabricated by selective laser melting , 2016 .

[146]  Garret E. O’Donnell,et al.  Optimisation of process parameters to address fundamental challenges during selective laser melting of Ti-6Al-4V: A review , 2018 .

[147]  Kaifei Zhang,et al.  Manufacturing Feasibility and Forming Properties of Cu-4Sn in Selective Laser Melting , 2017, Materials.

[148]  Yaliang Li,et al.  SCI , 2021, Proceedings of the 30th ACM International Conference on Information & Knowledge Management.

[149]  R. Carlos.  Progress. , 2020, Journal of the American College of Radiology : JACR.

[150]  C. Körner,et al.  Numerical simulation of multi-component evaporation during selective electron beam melting of TiAl , 2017 .

[151]  M. Rettenmayr,et al.  Microstructural evolution during temperature gradient zone melting: Cellular automaton simulation and experiment , 2018 .

[152]  Andrew G. Glen,et al.  APPL , 2001 .

[153]  P. Alam.  ‘K’ , 2021, Composites Engineering.

[154]  Zemin Wang,et al.  Role of molten pool mode on formability, microstructure and mechanical properties of selective laser melted Ti-6Al-4V alloy , 2016 .

[155]  J. Shen,et al.  Strength and strain hardening of a selective laser melted AlSi10Mg alloy , 2017 .

[156]  M. Preuss,et al.  Microstructure, mechanical properties and residual stresses as a function of welding speed in aluminium AA5083 friction stir welds , 2003 .

[157]  Zhiheng Hu,et al.  Selective laser melting of high strength Al–Cu–Mg alloys: Processing, microstructure and mechanical properties , 2016 .

[158]  I. Ashcroft,et al.  Reducing porosity in AlSi10Mg parts processed by selective laser melting , 2014 .

[159]  E. Aghion,et al.  Effect of surface roughness on corrosion fatigue performance of AlSi10Mg alloy produced by Selective Laser Melting (SLM) , 2017 .

[160]  Bo Song,et al.  Fabrication of NiCr alloy parts by selective laser melting: Columnar microstructure and anisotropic mechanical behavior , 2014 .

[161]  Kebing Zhang,et al.  Characterization of heat affected zone liquation cracking in laser additive manufacturing of Inconel 718 , 2016 .

[162]  G. Kullmer,et al.  Fatigue crack growth behavior and mechanical properties of additively processed EN AW-7075 aluminium alloy , 2016 .

[163]  Yusheng Shi,et al.  Amorphous alloy strengthened stainless steel manufactured by selective laser melting: Enhanced strength and improved corrosion resistance , 2018 .