Structure and Formation Mechanism of Surface Film of Ag-MoS2 Composite during Electrical Sliding Wear

[1]  Izhak Etsion,et al.  Friction and wear of MoS2 films on laser textured steel surfaces , 2008 .

[2]  K. Wong,et al.  Surface and friction characterization of MoS2 and WS2 third body thin films under simulated wheel/rail rolling–sliding contact , 2008 .

[3]  Aykut Canakci,et al.  The effect of brush spring pressure on the wear behaviour of copper-graphite brushes with electrical current , 2007 .

[4]  T. M. Yue,et al.  Laser cladding of copper with molybdenum for wear resistance enhancement in electrical contacts , 2007 .

[5]  Jiajun Liu,et al.  Molybdenum disulfide coating deposited by hybrid treatment and its friction-reduction performance , 2007 .

[6]  Ping Liu,et al.  Sliding wear behavior of copper alloy contact wire against copper-based strip for high-speed electrified railways , 2007 .

[7]  J. Bressan,et al.  Study of wear in self-lubricating composites for application in seals of electric motors , 2006 .

[8]  Wang Ke,et al.  The influence of unidirectional pressure on electrical conductivity of carbon black filled polyethylene , 2006 .

[9]  K. Wahl,et al.  Preparation of chameleon coatings for space and ambient environments , 2006 .

[10]  Niu Zhi-chuan,et al.  Optical characteristics of InAs quantum dots on GaAs matrix by using various InGaAs structures , 2006 .

[11]  Feng Yi,et al.  Effect of the electric current on the friction and wear properties of the CNT–Ag–G composites , 2005 .

[12]  M. Ozaki,et al.  Perylene derivative sensitized multi-walled carbon nanotube thin film , 2005 .

[13]  Ali Erdemir,et al.  Historical developments and new trends in tribological and solid lubricant coatings. , 2004 .