论文信息 - Design of four-mode erbium doped fiber amplifier with low differential modal gain for modal division multiplexed transmissions - 字舞流文

Design of four-mode erbium doped fiber amplifier with low differential modal gain for modal division multiplexed transmissions

We present a practical four-mode erbium-doped fiber design (with reasonably good fabrication tolerance) incorporating two separate doped regions for low differential modal gain across all the signal modes using LP01p and LP41p pump modes only.

David J. Richardson | Francesco Poletti | Yongmin Jung | Qiongyue Kang | Shaif-Ul Alam | D. Richardson | Yongmin Jung | S. Alam | F. Poletti | Q. Kang | Ee Leong Lim | E. Lim

[1] Francesco Poletti,et al. Accurate modal gain control in a multimode erbium doped fiber amplifier incorporating ring doping and a simple LP₀₁ pump configuration. , 2012, Optics express.

[2] B. Guan,et al. A Six-Mode Erbium-Doped Fiber Amplifier , 2012 .

[3] Maxim Kuschnerov,et al. 73.7 Tb/s (96X3x256-Gb/s) mode-division-multiplexed DP-16QAM transmission with inline MM-EDFA , 2012 .

[4] E. Ip. Gain Equalization for Few-Mode Fiber Amplifiers Beyond Two Propagating Mode Groups , 2012, IEEE Photonics Technology Letters.

[5] Allan W. Snyder,et al. Modes of optical waveguides , 1978 .

[7] J. M. Kahn,et al. Design of Transmission Fibers and Doped Fiber Amplifiers for Mode-Division Multiplexing , 2012, IEEE Photonics Technology Letters.