Static Accuracy Enhancement of Redundantly Actuated Parallel Kinematic Machine Tools

[1]  Abdul Rauf,et al.  Experimental results on kinematic calibration of parallel manipulators using a partial pose measurement device , 2006, IEEE Transactions on Robotics.

[2]  Tian Huang,et al.  Stiffness Estimation of a Tripod-Based Parallel , 2002 .

[3]  Carl-Thomas Schneider.  LASERTRACER – A NEW TYPE OF SELF TRACKING LASER INTERFEROMETER , 2004 .

[4]  Félix Majou.  Analyse Cinétostatique des Machine Parallèles à Translations. (Kinetostatic Analysis of Translationnal Parallel Machines) , 2004 .

[5]  François Pierrot,et al.  A statistical approach for the computation of the forward kinematic model of redundantly actuated mechanisms , 2003, Proceedings 2003 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS 2003) (Cat. No.03CH37453).

[6]  Masahiko Hiraki,et al.  The Calibration of Parallel-CMM: Parallel-Coordinate Measuring Machine , 2002 .

[7]  JongWon Kim,et al.  Kinematic Calibration for Redundantly Actuated Parallel Mechanisms , 2004 .

[8]  Osamu Sato,et al.  Parallel CMM - A New Development: Mechanical Design and Calibration Results , 2002 .

[9]  John C. Ziegert,et al.  Uncertainty propagation in calibration of parallel kinematic machines , 1999 .

[10]  Arthur C. Sanderson,et al.  Arm signature identification , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[11]  Wen-Yuh Jywe.  The Development and Application of a Planar Encoder Measuring System for Performance Tests of CNC Machine Tools , 2003 .

[12]  Dominique Deblaise,et al.  A systematic analytical method for PKM stiffness matrix calculation , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[13]  François Pierrot,et al.  A Method for Modeling Analytical Stiffness of a Lower Mobility Parallel Manipulator , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[14]  Y. K. Yiu,et al.  Auto-calibration for a parallel manipulator with sensor redundancy , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[15]  Lukas Beyer.  Genauigkeitssteigerung von Industrierobotern , 2005 .

[16]  Jian Wang,et al.  On the accuracy of a Stewart platform. II. Kinematic calibration and compensation , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[17]  Abdul Rauf,et al.  Complete parameter identification of parallel manipulators with partial pose information using a new measurement device , 2004, Robotica.

[18]  David Daney.  Etalonnage geometrique des robots paralleles , 2000 .

[19]  Patrick Maurine.  Développement et mise en oeuvre de méthodologies d'étalonnage de robots manipulateurs industriels , 1996 .

[20]  Clément Gosselin,et al.  Stiffness mapping for parallel manipulators , 1990, IEEE Trans. Robotics Autom..

[21]  Takashi Suehiro,et al.  Stiffness Analysis and Design of a Compact Modified Delta Parallel Mechanism , 2004, Robotica.

[23]  Peter Vischer,et al.  Improving the accuracy of parallel robots , 1996 .

[24]  Hélène Frayssinet Mazerolle.  Méthode d"étalonnage d"une machine-outil à cinématique parallèle à cinq axes à grands angles d"inclinaison , 2007 .

[25]  C. Gosselin,et al.  Kinetostatic Modeling of N-DOF Parallel Mechanisms With a Passive Constraining Leg and Prismatic Actuators , 2001 .

[26]  Wisama Khalil,et al.  Self calibration of Stewart-Gough parallel robots without extra sensors , 1999, IEEE Trans. Robotics Autom..

[27]  Hanqi Zhuang,et al.  Calibration of stewart platforms and other parallel manipulators by minimizing inverse kinematic residuals , 1998, J. Field Robotics.

[28]  Kenneth Levenberg.  A METHOD FOR THE SOLUTION OF CERTAIN NON – LINEAR PROBLEMS IN LEAST SQUARES , 1944 .

[29]  Sungbok Kim.  Operational quality analysis of parallel manipulators with actuation redundancy , 1997, Proceedings of International Conference on Robotics and Automation.

[30]  Sébastien Krut,et al.  An improved method for the geometrical calibration of parallelogram-based parallel robots , 2006, Proceedings 2006 IEEE International Conference on Robotics and Automation, 2006. ICRA 2006..

[31]  David Daney.  Kinematic calibration of the Gough Platform , 2003, Robotica.

[32]  Sébastien Krut,et al.  Enhancing parallel robots accuracy with redundant sensors , 2002, Proceedings 2002 IEEE International Conference on Robotics and Automation (Cat. No.02CH37292).

[33]  Reymond Clavel,et al.  Kinematic calibration of the parallel Delta robot , 1998, Robotica.

[34]  Guilin Yang,et al.  Simultaneous base and tool calibration for self-calibrated parallel robots , 2002, Robotica.

[35]  Ilian A. Bonev,et al.  A simple new closed-form solution of the direct kinematics of parallel manipulators using three linear extra sensors , 1999, 1999 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (Cat. No.99TH8399).

[36]  Wisama Khalil,et al.  Calibration of parallel robots using two inclinometers , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[37]  François Pierrot,et al.  Optimal design of a 6-dof parallel measurement mechanism integrated in a 3-dof parallel machine-tool , 2008, 2008 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[38]  John M. Hollerbach,et al.  The noise amplification index for optimal pose selection in robot calibration , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[39]  Damien Chablat,et al.  Working modes and aspects in fully parallel manipulators , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).

[40]  I. Bonev,et al.  A new method for solving the direct kinematics of general 6-6 Stewart Platforms using three linear extra sensors , 2000 .

[41]  Charles L. Lawson,et al.  Solving least squares problems , 1976, Classics in applied mathematics.

[42]  C. Gosselin,et al.  Kinetostatic modeling of parallel mechanisms with a passive constraining leg and revolute actuators , 2002 .

[43]  David Daney.  Mobility constraints on the legs of a parallel robot to improve the kinematic calibration. , 1998 .

[44]  K. S. Smith,et al.  Parallel kinematic machines : theoretical aspects and industrial requirements , 1999 .

[45]  Patrick Maurine,et al.  Self-calibration of delta parallel robots with elastic deformation compensation , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[46]  Sebastien Besnard.  Etalonnage geometrique des robots serie et paralleles , 2000 .

[47]  Samad Hayati,et al.  Robot arm geometric link parameter estimation , 1983, The 22nd IEEE Conference on Decision and Control.

[48]  Leonard S. Haynes,et al.  A “3-2-1” kinematic configuration of a Stewart platform and its application to six degree of freedom pose measurements , 1994 .

[49]  Yu Sun,et al.  Observability index selection for robot calibration , 2008, 2008 IEEE International Conference on Robotics and Automation.

[50]  Jean-Pierre Merlet,et al.  Parallel Robots , 2000 .

[51]  Reymond Clavel,et al.  Kinematic calibration of the parallel Argos mechanism , 2000, Robotica.

[52]  Lining Sun,et al.  Calibration of a 2-DOF planar parallel robot: home position identification and experimental verification , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[53]  Nicolas Andreff,et al.  Simplifying the kinematic calibration of parallel mechanisms using vision-based metrology , 2006, IEEE Transactions on Robotics.

[54]  Marco Ceccarelli,et al.  Coordinate-free formulation of a 3-2-1 wire-based tracking device using Cayley-Menger determinants , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[55]  Hanqi Zhuang,et al.  Method for kinematic calibration of stewart platforms , 1993, J. Field Robotics.

[56]  Vincent Hayward,et al.  Calibration of a parallel robot using multiple kinematic closed loops , 1994, Proceedings of the 1994 IEEE International Conference on Robotics and Automation.

[57]  Tatsuo Arai,et al.  Optimal sensor placement for forward kinematics evaluation of a 6-DOF parallel link manipulator , 1991, Proceedings IROS '91:IEEE/RSJ International Workshop on Intelligent Robots and Systems '91.

[58]  Placid Mathew Ferreira,et al.  Computation of stiffness and stiffness bounds for parallel link manipulators 1 This research was sup , 1999 .

[59]  Clément Gosselin,et al.  Parametric Stiffness Analysis of the Orthoglide , 2004, ArXiv.

[60]  Etienne Dombre,et al.  A calibration procedure for the parallel robot Delta 4 , 1996, Proceedings of IEEE International Conference on Robotics and Automation.

[61]  Xiaoqiang Tang,et al.  Singularity analysis of redundant parallel manipulators , 2004, 2004 IEEE International Conference on Systems, Man and Cybernetics (IEEE Cat. No.04CH37583).

[62]  Masaru Uchiyama,et al.  On the stiffness and stability of Gough-Stewart platforms , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[64]  Ka C. Cheok,et al.  Exact methods for determining the kinematics of a stewart platform using additional displacement sensors , 1993, J. Field Robotics.

[65]  Louis J. Everett,et al.  Kinematic modelling for robot calibration , 1987, Proceedings. 1987 IEEE International Conference on Robotics and Automation.

[66]  Abdul Rauf,et al.  Fully autonomous calibration of parallel manipulators by imposing position constraint , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[67]  Ming-Hwei Perng,et al.  Self-calibration of a general hexapod manipulator with enhanced precision in 5-DOF motions , 2004 .

[68]  Olivier Gascuel,et al.  Control of a 3-DOF Over-Actuated Parallel Mechansim , 2002 .

[69]  J. Fauroux,et al.  Evaluation of a 4-Degree of Freedom Parallel Manipulator Stiffness , 2003 .

[70]  Sébastien Krut,et al.  Contribution à l'étude des robots parallèles légers, 3T-1R et 3T-2R, à forts débattements angulaires , 2003 .

[71]  W. WampleryDept.  The Calibration Index and the Role of Input Noise in Robot Calibration , 1996 .

[72]  Kiyoshi Takamasu,et al.  Artefact calibration of parallel mechanism, kinematic calibration with a priori knowledge , 2004 .

[73]  Guanfeng Liu,et al.  Advantages and dynamics of parallel manipulators with redundant actuation , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[74]  Junwei Han,et al.  Kinematic calibration of parallel robots , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[75]  Frank Chongwoo Park,et al.  Geometric algorithms for closed chain kinematic calibration , 1999, Proceedings 1999 IEEE International Conference on Robotics and Automation (Cat. No.99CH36288C).

[76]  Jean-Pierre Merlet,et al.  Closed-form resolution of the direct kinematics of parallel manipulators using extra sensors data , 1993, [1993] Proceedings IEEE International Conference on Robotics and Automation.

[77]  N. Plitea,et al.  An extended inverse kinematic model of the HEXA-parallel-robot for calibration purposes , 2005, IEEE International Conference Mechatronics and Automation, 2005.

[78]  Sébastien Krut,et al.  On PKM with articulated travelling-plate and large tilting angles , 2006, ARK.

[79]  Wisama Khalil,et al.  Identifiable parameters for parallel robots kinematic calibration , 2001, Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164).

[80]  Masaru Uchiyama,et al.  Forward kinematic calibration and gravity compensation for parallel-mechanism-based machine tools , 2002 .

[81]  Whee Kuk Kim,et al.  Analysis for a planar 3 degree-of-freedom parallel mechanism with actively adjustable stiffness characteristics , 1997, Proceedings of International Conference on Robotics and Automation.

[82]  Vincent Hayward.  Design of a Hydraulic Robot Shoulder Based on a Combinatorial Mechanism , 1993, ISER.

[83]  D. Marquardt.  An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[84]  Yong-Sheng Zhao,et al.  The primary calibration research of a measuring limb in 5-UPS/PRPU parallel machine tool , 2004, 2004 International Conference on Intelligent Mechatronics and Automation, 2004. Proceedings..

[85]  John M. Hollerbach,et al.  The Calibration Index and Taxonomy for Robot Kinematic Calibration Methods , 1996, Int. J. Robotics Res..

[86]  Dominique Deblaise,et al.  Contribution à la modélisation et à l' étalonnage élasto-géométriques des manipulateurs à structure parallèle , 2006 .

[87]  Sébastien Krut,et al.  Force performance indexes for parallel mechanisms with actuation redundancy, especially for parallel wire-driven manipulators , 2004, 2004 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) (IEEE Cat. No.04CH37566).

[88]  Jeha Ryu,et al.  A closed-form solution to the direct kinematics of nearly general parallel manipulators with optimally located three linear extra sensors , 2001, IEEE Trans. Robotics Autom..

[89]  Jae Hoon Lee,et al.  Optimization and experimental verification for the antagonistic stiffness in redundantly actuated mechanisms: a five-bar example , 2005 .

[90]  Dominique Deblaise,et al.  Effective geometrical calibration of a delta parallel robot used in neurosurgery , 2005, 2005 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[91]  Jean-Pierre Merlet,et al.  Determination of the wrench-closure workspace of 6-DOF parallel cable-driven mechanisms , 2006, ARK.

[92]  Guilin Yang,et al.  Self-calibration of three-legged modular reconfigurable parallel robots based on leg-end distance errors , 2001, Robotica.

[93]  Ralf Koeppe,et al.  Robot-Robot and Human-Robot Cooperation in Commercial Robotics Applications , 2003, ISRR.

[94]  Sébastien Krut,et al.  ARCHI: a new redundant parallel mechanism-modeling, control and first results , 2001, Proceedings 2001 IEEE/RSJ International Conference on Intelligent Robots and Systems. Expanding the Societal Role of Robotics in the the Next Millennium (Cat. No.01CH37180).

[95]  T. Matsushita,et al.  Kinematic calibration on a parallel kinematic machine tool of the Stewart platform by circular tests , 2004, Proceedings of the 2004 American Control Conference.

[96]  Andreas Müller,et al.  Internal Preload Control of redundantly actuated Parallel Manipulators – Backlash avoiding Control , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[97]  Lining Sun,et al.  Conceptional Design and Kinematics Modeling of a Wide-Range Flexure Hinge-Based Parallel Manipulator , 2005, Proceedings of the 2005 IEEE International Conference on Robotics and Automation.

[98]  Knut Großmann,et al.  Preiswerte Genauigkeit am Hexapod , 2001 .

[99]  Dimitar Chakarov,et al.  Study of the antagonistic stiffness of parallel manipulators with actuation redundancy , 2004 .

[100]  Walter Schumacher,et al.  A parallel x-y manipulator with actuation redundancy for high-speed and active-stiffness applications , 1998, Proceedings. 1998 IEEE International Conference on Robotics and Automation (Cat. No.98CH36146).