SLM lattice structures: Properties, performance, applications and challenges

[1]  I. Kim,et al.  Multi-lattice inner structures for high-strength and light-weight in metal selective laser melting process , 2019, Materials & Design.

[2]  Yaobing Wang,et al.  Lightweight structure of a phase-change thermal controller based on lattice cells manufactured by SLM , 2019, Chinese Journal of Aeronautics.

[3]  M. Brandt,et al.  Computational modelling of strut defects in SLM manufactured lattice structures , 2019, Materials & Design.

[4]  Daining Fang,et al.  Evaluation of compressive properties of SLM-fabricated multi-layer lattice structures by experimental test and μ-CT-based finite element analysis , 2019, Materials & Design.

[5]  Roger C. Reed,et al.  Design of metallic bone by additive manufacturing , 2019, Scripta Materialia.

[6]  A. Zargarian,et al.  On the fatigue behavior of additive manufactured lattice structures , 2019, Theoretical and Applied Fracture Mechanics.

[7]  M. Yakout,et al.  Density and mechanical properties in selective laser melting of Invar 36 and stainless steel 316L , 2019, Journal of Materials Processing Technology.

[8]  F. Concli,et al.  Numerical and experimental assessment of the mechanical properties of 3D printed 18-Ni300 steel trabecular structures produced by Selective Laser Melting – a lean design approach , 2019, Virtual and Physical Prototyping.

[9]  P. Tran,et al.  Rational design of additively manufactured Ti6Al4V implants to control Staphylococcus aureus biofilm formation , 2019, Materialia.

[10]  Amir A Zadpoor,et al.  Mechanical performance of additively manufactured meta-biomaterials. , 2019, Acta biomaterialia.

[11]  Ismail Lazoglu,et al.  Five-axis additive manufacturing of freeform models through buildup of transition layers , 2019, Journal of Manufacturing Systems.

[12]  Songlin Ding,et al.  Additive manufacturing technology for porous metal implant applications and triple minimal surface structures: A review , 2018, Bioactive materials.

[13]  Dirk Mohr,et al.  Mechanical performance of additively-manufactured anisotropic and isotropic smooth shell-lattice materials: Simulations & experiments , 2019, Journal of the Mechanics and Physics of Solids.

[14]  Moataz M. Attallah,et al.  The design of additively manufactured lattices to increase the functionality of medical implants. , 2019, Materials science & engineering. C, Materials for biological applications.

[15]  M. Brandt,et al.  Inconel 625 lattice structures manufactured by selective laser melting (SLM): Mechanical properties, deformation and failure modes , 2018, Materials & Design.

[16]  E. Maire,et al.  Compression behavior of lattice structures produced by selective laser melting: X-ray tomography based experimental and finite element approaches , 2018, Acta Materialia.

[17]  Cuie Wen,et al.  Ultrahigh-strength titanium gyroid scaffolds manufactured by selective laser melting (SLM) for bone implant applications , 2018, Acta Materialia.

[18]  Dirk Mohr,et al.  3D Plate‐Lattices: An Emerging Class of Low‐Density Metamaterial Exhibiting Optimal Isotropic Stiffness , 2018, Advanced materials.

[19]  M. Brandt,et al.  Angle defines attachment: Switching the biological response to titanium interfaces by modifying the inclination angle during selective laser melting , 2018, Materials & Design.

[20]  Martin Leary,et al.  Selective electron beam manufactured Ti-6Al-4V lattice structures for orthopedic implant applications: Current status and outstanding challenges , 2018 .

[21]  Carlo Giovanni Ferro,et al.  Lattice structured impact absorber with embedded anti-icing system for aircraft wings fabricated with additive SLM process , 2018, Materials Today Communications.

[22]  P. Köhnen,et al.  Mechanical properties and deformation behavior of additively manufactured lattice structures of stainless steel , 2018 .

[23]  Di Wang,et al.  Evaluation of topology-optimized lattice structures manufactured via selective laser melting , 2018 .

[24]  S. L. Sing,et al.  Selective laser melting of lattice structures: A statistical approach to manufacturability and mechanical behavior , 2018 .

[25]  Christopher B. Williams,et al.  Insights into the mechanical properties of several triply periodic minimal surface lattice structures made by polymer additive manufacturing , 2017, Polymer.

[26]  D. Pasini,et al.  Effect of the geometrical defectiveness on the mechanical properties of SLM biomedical Ti6Al4V lattices , 2018 .

[27]  Paolo Maggiore,et al.  Development of a multifunctional panel for aerospace use through SLM Additive Manufacturing , 2018 .

[28]  A. Panesar,et al.  Strategies for functionally graded lattice structures derived using topology optimisation for Additive Manufacturing , 2018 .

[29]  E. Maire,et al.  Effect of strut orientation on the microstructure heterogeneities in AlSi10Mg lattices processed by selective laser melting , 2017 .

[30]  Alessandro Fortunato,et al.  Effect of Selective Laser Melting (SLM) process parameters on microstructure and mechanical properties of 316L austenitic stainless steel , 2017 .

[31]  M. Brandt,et al.  Computationally efficient finite difference method for metal additive manufacturing: A reduced-order DFAM tool applied to SLM , 2017 .

[32]  Kah Fai Leong,et al.  Compressive properties of functionally graded lattice structures manufactured by selective laser melting , 2017 .

[33]  Yaoyao Fiona Zhao,et al.  A Survey of Modeling of Lattice Structures Fabricated by Additive Manufacturing , 2017 .

[34]  Damiano Pasini,et al.  Elastic and failure response of imperfect three-dimensional metallic lattices: the role of geometric defects induced by Selective Laser Melting , 2017 .

[35]  S. D. Sharples,et al.  Meso-scale defect evaluation of selective laser melting using spatially resolved acoustic spectroscopy , 2017, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[36]  I. Ashcroft,et al.  Compressive failure modes and energy absorption in additively manufactured double gyroid lattices , 2017 .

[37]  G. McShane,et al.  Impact response of additively manufactured metallic hybrid lattice materials , 2017 .

[38]  H. Wadley,et al.  Mechanical metamaterials at the theoretical limit of isotropic elastic stiffness , 2017, Nature.

[39]  R. Hague,et al.  An investigation into reinforced and functionally graded lattice structures , 2017 .

[40]  Y. Nadot,et al.  Influence of defect size on the fatigue resistance of AlSi10Mg alloy elaborated by selective laser melting (SLM) , 2017 .

[41]  S. Palanisamy,et al.  A comparative study of flexural properties of additively manufactured aluminium lattice structures , 2017 .

[42]  Martin Leary,et al.  Mechanical properties of Ti6Al4V and AlSi12Mg lattice structures manufactured by Selective Laser Melting (SLM) , 2017 .

[43]  N. Fang,et al.  Lightweight Mechanical Metamaterials with Tunable Negative Thermal Expansion. , 2016, Physical review letters.

[44]  R. Hague,et al.  A mechanical property evaluation of graded density Al-Si10-Mg lattice structures manufactured by selective laser melting , 2016 .

[45]  Liang Hao,et al.  Fracture toughness and tensile strength of 316L stainless steel cellular lattice structures manufactured using the selective laser melting technique , 2016 .

[46]  C. Tasan,et al.  Metastable high-entropy dual-phase alloys overcome the strength–ductility trade-off , 2016, Nature.

[47]  R. Misra,et al.  The influence of cell morphology on the compressive fatigue behavior of Ti-6Al-4V meshes fabricated by electron beam melting. , 2016, Journal of the mechanical behavior of biomedical materials.

[48]  Martin Leary,et al.  Selective laser melting (SLM) of AlSi12Mg lattice structures , 2016 .

[49]  T. Becker,et al.  The achievable mechanical properties of SLM produced Maraging Steel 300 components , 2016 .

[50]  Yi Min Xie,et al.  Design of lattice structures with controlled anisotropy , 2016 .

[51]  Peng Wang,et al.  A novel carbon fiber reinforced lattice truss sandwich cylinder: Fabrication and experiments , 2016 .

[52]  D. Pasini,et al.  High-strength porous biomaterials for bone replacement: A strategy to assess the interplay between cell morphology, mechanical properties, bone ingrowth and manufacturing constraints. , 2016, Acta biomaterialia.

[53]  T. Mower,et al.  Mechanical behavior of additive manufactured, powder-bed laser-fused materials , 2016 .

[54]  M. Elahinia,et al.  On the effects of geometry, defects, and material asymmetry on the mechanical response of shape memory alloy cellular lattice structures , 2016 .

[55]  Martin Leary,et al.  Just-in-time Design and Additive Manufacture of Patient-specific Medical Implants , 2016 .

[56]  Brent Stucker,et al.  Influence of Defects on Mechanical Properties of Ti-6Al-4V Components Produced by Selective Laser Melting and Electron Beam Melting , 2015 .

[57]  Liz Nickels,et al.  AM and aerospace: an ideal combination , 2015 .

[58]  Liang Hao,et al.  Ti-6Al-4V triply periodic minimal surface structures for bone implants fabricated via selective laser melting. , 2015, Journal of the mechanical behavior of biomedical materials.

[59]  Seung Chul Han,et al.  A New Type of Low Density Material: Shellular , 2015, Advanced materials.

[60]  Andrew Owens,et al.  Benefits of Additive Manufacturing for Human Exploration of Mars , 2015 .

[61]  Liang Hao,et al.  Microstructure and mechanical properties of aluminium alloy cellular lattice structures manufactured by direct metal laser sintering , 2015 .

[62]  S. M. Ahmadi,et al.  Relationship between unit cell type and porosity and the fatigue behavior of selective laser melted meta-biomaterials. , 2015, Journal of the mechanical behavior of biomedical materials.

[63]  Amir A Zadpoor,et al.  Bone tissue regeneration: the role of scaffold geometry. , 2015, Biomaterials science.

[64]  J. Kruth,et al.  Effects of build orientation and heat treatment on the microstructure and mechanical properties of selective laser melted Ti6Al4V lattice structures , 2015 .

[65]  Tomáš Kroupa,et al.  The Influence of Processing Parameters on the Mechanical Properties of SLM Parts , 2015, Procedia Engineering.

[66]  Mohsen Badrossamay,et al.  Numerical investigation on mechanical properties of cellular lattice structures fabricated by fused deposition modeling , 2014 .

[67]  Brent Stucker,et al.  Analysis of defect generation in Ti–6Al–4V parts made using powder bed fusion additive manufacturing processes , 2014 .

[68]  John J. Vericella,et al.  Three‐Dimensional Printing of Elastomeric, Cellular Architectures with Negative Stiffness , 2014 .

[69]  Howon Lee,et al.  Ultralight, ultrastiff mechanical metamaterials , 2014, Science.

[70]  S. M. Ahmadi,et al.  Mechanical behavior of regular open-cell porous biomaterials made of diamond lattice unit cells. , 2014, Journal of the mechanical behavior of biomedical materials.

[71]  T. Niendorf,et al.  Lattice Structures Manufactured by SLM: On the Effect of Geometrical Dimensions on Microstructure Evolution During Processing , 2014, Metallurgical and Materials Transactions B.

[72]  Liang Hao,et al.  Evaluation of light-weight AlSi10Mg periodic cellular lattice structures fabricated via direct metal laser sintering , 2014 .

[73]  Liang Hao,et al.  Advanced lightweight 316L stainless steel cellular lattice structures fabricated via selective laser melting , 2014 .

[74]  Antonio Armillotta,et al.  SLM tooling for die casting with conformal cooling channels , 2014 .

[75]  Konda Gokuldoss Prashanth,et al.  Microstructure and mechanical properties of Al-12Si produced by selective laser melting: Effect of heat treatment , 2014 .

[76]  A. A. Zadpoor,et al.  Fatigue behavior of porous biomaterials manufactured using selective laser melting. , 2013, Materials science & engineering. C, Materials for biological applications.

[77]  Lin Yang,et al.  Interlocked hierarchical lattice materials reinforced by woven textile sandwich composites , 2013 .

[78]  André Luiz Jardini,et al.  Microstructure and mechanical behavior of porous Ti-6Al-4V parts obtained by selective laser melting. , 2013, Journal of the mechanical behavior of biomedical materials.

[79]  Martine Wevers,et al.  Surface Roughness and Morphology Customization of Additive Manufactured Open Porous Ti6Al4V Structures , 2013, Materials.

[80]  Ming-Chuan Leu,et al.  Additive manufacturing: technology, applications and research needs , 2013, Frontiers of Mechanical Engineering.

[81]  Jongmin Shim,et al.  3D Soft Metamaterials with Negative Poisson's Ratio , 2013, Advanced materials.

[82]  A. A. Zadpoor,et al.  Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing , 2013 .

[83]  Recep Gümrük,et al.  Compressive behaviour of stainless steel micro-lattice structures , 2013 .

[84]  M. Smith,et al.  Finite element modelling of the compressive response of lattice structures manufactured using the selective laser melting technique , 2013 .

[85]  Ahmed Hussein,et al.  Evaluations of cellular lattice structures manufactured using selective laser melting , 2012 .

[86]  R. Hague,et al.  The design of impact absorbing structures for additive manufacture , 2012 .

[87]  F. J. García de abajo,et al.  Anisotropic metamaterials for full control of acoustic waves. , 2012, Physical review letters.

[88]  E. Brandl,et al.  Additive manufactured AlSi10Mg samples using Selective Laser Melting (SLM): Microstructure, high cycle fatigue, and fracture behavior , 2012 .

[89]  Ruben Gatt,et al.  Negative linear compressibility of hexagonal honeycombs and related systems , 2011 .

[90]  Ahmed Hussein,et al.  Design and additive manufacturing of cellular lattice structures , 2011 .

[91]  J. Kruth,et al.  Micro-CT-based improvement of geometrical and mechanical controllability of selective laser melted Ti6Al4V porous structures , 2011 .

[92]  Takashi Nakamura,et al.  Bioactive Ti metal analogous to human cancellous bone: Fabrication by selective laser melting and chemical treatments. , 2011, Acta biomaterialia.

[93]  T. Zeng,et al.  Mechanics of advanced fiber reinforced lattice composites , 2010 .

[94]  Guoxing Lu,et al.  Plastic Deformation, Failure and Energy Absorption of Sandwich Structures with Metallic Cellular Cores , 2010 .

[95]  M. Ashby,et al.  Cellular Materials in Nature and Medicine , 2010 .

[96]  W. Cantwell,et al.  The Influence of Processing Parameters on the Mechanical Properties of Selectively Laser Melted Stainless Steel Microlattice Structures , 2010 .

[97]  J. Kruth,et al.  A study of the microstructural evolution during selective laser melting of Ti–6Al–4V , 2010 .

[98]  Lewis Mullen,et al.  Selective Laser Melting: a regular unit cell approach for the manufacture of porous, titanium, bone in-growth constructs, suitable for orthopedic applications. , 2009, Journal of biomedical materials research. Part B, Applied biomaterials.

[99]  L. Murr,et al.  Microstructure and mechanical behavior of Ti-6Al-4V produced by rapid-layer manufacturing, for biomedical applications. , 2009, Journal of the mechanical behavior of biomedical materials.

[100]  David W. Rosen,et al.  Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing , 2009 .

[101]  John Banhart,et al.  Aluminium Foam Sandwich Panels: Manufacture, Metallurgy and Applications , 2008 .

[102]  Wesley J. Cantwell,et al.  The quasi-static and blast loading response of lattice structures , 2008 .

[103]  Douglas T. Queheillalt,et al.  Mechanical properties of an extruded pyramidal lattice truss sandwich structure , 2008 .

[104]  Hualin Fan,et al.  Sandwich panels with Kagome lattice cores reinforced by carbon fibers , 2007 .

[105]  Ph. Bertrand,et al.  Parametric analysis of the selective laser melting process , 2007 .

[106]  Y. Fainman,et al.  Inhomogenous dielectric metamaterials with space-variant polarizability. , 2007, Physical review letters.

[107]  Shuijun Li,et al.  Dependence of strength, elongation, and toughness on grain size in metallic structural materials , 2007 .

[108]  J. Kruth,et al.  Selective laser melting of biocompatible metals for rapid manufacturing of medical parts , 2006 .

[109]  N. Fang,et al.  Ultrasonic metamaterials with negative modulus , 2006, Nature materials.

[110]  C. Sutcliffe,et al.  Crush Behaviour Of Open Cellular LatticeStructures Manufactured UsingSelective Laser Melting , 2006 .

[111]  Claus Emmelmann,et al.  Rapid manufacturing of lattice structures with selective laser melting , 2006, SPIE LASE.

[112]  M. Ashby.  The properties of foams and lattices , 2006, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[113]  M. H. Luxner,et al.  Finite element modeling concepts and linear analyses of 3D regular open cell structures , 2005 .

[114]  Christopher J. Sutcliffe,et al.  Rapid design and manufacture of ultra light cellular materials , 2005 .

[115]  Pranav Shrotriya,et al.  On the deformation of aluminum lattice block structures: from struts to structures , 2004 .

[116]  H. Wadley,et al.  Compressive behavior of age hardenable tetrahedral lattice truss structures made from aluminium , 2004, Acta Materialia.

[117]  L. Froyen,et al.  Selective laser melting of iron-based powder , 2004 .

[118]  Claus B. W. Pedersen,et al.  Topology optimization design of crushed 2D-frames for desired energy absorption history , 2003 .

[119]  M. Jenkins.  Materials in Sports Equipment , 2003 .

[120]  E. Ramm,et al.  Structural optimization and form finding of light weight structures , 2001 .

[121]  M. Ashby,et al.  Effective properties of the octet-truss lattice material , 2001 .

[122]  J. Banhart.  Manufacturing routes for metallic foams , 2000 .

[123]  M. Ashby,et al.  Metal Foams: A Design Guide , 2000 .

[124]  M. Langseth,et al.  Static crushing of square aluminium extrusions with aluminium foam filler , 1999 .

[125]  Mamoru Mabuchi,et al.  Experimental study of energy absorption in a close-celled aluminum foam under dynamic loading , 1999 .

[126]  Tomasz Wierzbicki,et al.  Crash behavior of box columns filled with aluminum honeycomb or foam , 1998 .

[127]  F. Rammerstorfer,et al.  Crushing of axially compressed steel tubes filled with aluminium foam , 1997 .

[128]  Lorna J. Gibson,et al.  Modelling the mechanical behavior of cellular materials , 1989 .

[129]  M. Ashby,et al.  Cellular solids: Structure & properties , 1988 .