Heat pipe heat exchanger for heat recovery in air conditioning

Abstract The heat pipe heat exchangers are used in heat recovery applications to cool the incoming fresh air in air conditioning applications. Two streams of fresh and return air have been connected with heat pipe heat exchanger to investigate the thermal performance and effectiveness of heat recovery system. Ratios of mass flow rate between return and fresh air of 1, 1.5 and 2.3 have been adapted to validate the heat transfer and the temperature change of fresh air. Fresh air inlet temperature of 32–40 °C has been controlled, while the inlet return air temperature is kept constant at about 26 °C. The results showed that the temperature changes of fresh and return air are increased with the increase of inlet temperature of fresh air. The effectiveness and heat transfer for both evaporator and condenser sections are also increased to about 48%, when the inlet fresh air temperature is increased to 40 °C. The effect of mass flow rate ratio on effectiveness is positive for evaporator side and negative for condenser side. The enthalpy ratio between the heat recovery and conventional air mixing is increased to about 85% with increasing fresh air inlet temperature. The optimum effectiveness of heat pipe heat exchanger is estimated and compared with the present experimental data. The results showed that the effectiveness is close to the optimum effectiveness at fresh air inlet temperature near the fluid operating temperature of heat pipes.

[1]  Francisco Javier Rey Martínez,et al.  Design and experimental study of a mixed energy recovery system, heat pipes and indirect evaporative equipment for air conditioning , 2003 .

[2]  K. S. Ong,et al.  Performance of a R-134a-filled thermosyphon , 2003 .

[3]  W. Stoecker.  Design of thermal systems , 1971 .

[4]  S. H. Noie.  Heat transfer characteristics of a two-phase closed thermosyphon , 2005 .

[5]  Eric D. Larson,et al.  Electricity Use and Efficiency in Pumping and Air-Handling Systems , 1990 .

[6]  P. Johnson,et al.  Design, construction and testing of a thermosyphon heat exchanger for medium temperature heat recovery in bakeries , 1995 .

[7]  M. S Söylemez.  On the thermoeconomical optimization of heat pipe heat exchanger HPHE for waste heat recovery , 2003 .

[8]  Hong Zhang,et al.  Research, development and industrial application of heat pipe technology in China , 2003 .

[9]  Song Lin,et al.  Numerical study of heat pipe application in heat recovery systems , 2005 .

[10]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[11]  Guiping Lin,et al.  Waste heat recovery using heat pipe heat exchanger for heating automobile using exhaust gas , 2003 .

[12]  C. Y. Liu,et al.  Predicting the performance of a heat-pipe heat exchanger, using the effectiveness-NTU method , 1990 .

[13]  M. S Söylemez.  On the optimum heat exchanger sizing for heat recovery , 2000 .

[14]  S. H. Noie-Baghban,et al.  Waste heat recovery using heat pipe heat exchanger (HPHE) for surgery rooms in hospitals , 2000 .