Review of energy harvesting techniques and applications for microelectronics (Keynote Address)

The trends in technology allow the decrease in both size and power consumption of complex digital systems. This decrease in size and power gives rise to new paradigms of computing and use of electronics, with many small devices working collaboratively or at least with strong communication capabilities. Examples of these new paradigms are wearable devices and wireless sensor networks. Currently, these devices are powered by batteries. However, batteries present several disadvantages: the need to either replace or recharge them periodically and their big size and weight compared to high technology electronics. One possibility to overcome these power limitations is to extract (harvest) energy from the environment to either recharge a battery, or even to directly power the electronic device. This paper presents several methods to design an energy harvesting device depending on the type of energy avaliable.

[1]  James D. Meindl,et al.  Low power microelectronics: retrospect and prospect , 1995, Proc. IEEE.

[2]  J. D. Janssen,et al.  A triaxial accelerometer and portable data processing unit for the assessment of daily physical activity , 1997, IEEE Transactions on Biomedical Engineering.

[3]  R. B. Yates,et al.  Development of an electromagnetic micro-generator , 2001 .

[4]  R. Zane,et al.  Recycling ambient microwave energy with broad-band rectenna arrays , 2004, IEEE Transactions on Microwave Theory and Techniques.

[5]  Anantha Chandrakasan,et al.  Vibration-to-electric energy conversion , 1999, Proceedings. 1999 International Symposium on Low Power Electronics and Design (Cat. No.99TH8477).

[6]  S. W. Angrist.  Direct energy conversion , 1976 .

[7]  Heath Hofmann,et al.  Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode , 2003 .

[8]  Jeff MacNelly.  The greatest Shoe® on Earth , 1985 .

[9]  A. Jansen,et al.  Design of a fuel cell powered radio, a feasibility study into alternative power sources for portable products , 2000, Proceedings of the 2000 IEEE International Symposium on Electronics and the Environment (Cat. No.00CH37082).

[10]  Thad Starner,et al.  Human-Powered Wearable Computing , 1996, IBM Syst. J..

[11]  Rajeevan Amirtharajah,et al.  Self-powered signal processing using vibration-based power generation , 1998, IEEE J. Solid State Circuits.

[12]  Gordon M. H. Chan,et al.  Infrared signal transmission by a laser-micromachined, vibration-induced power generator , 2000, Proceedings of the 43rd IEEE Midwest Symposium on Circuits and Systems (Cat.No.CH37144).

[13]  Herbert Reichl,et al.  Batteries and power supplies for wearable and ubiquitous computing , 1999, Digest of Papers. Third International Symposium on Wearable Computers.

[14]  Mark Billinghurst,et al.  Wearable Devices: New Ways to Manage Information , 1999, Computer.

[15]  A. J. Jansen,et al.  A Batteryless Remote Control For Volvo, results of a feasibility study , 2000 .

[16]  José Luis González,et al.  Human Powered Piezoelectric Batteries to Supply Power to Wearable Electronic Devices , 2002 .

[17]  Joseph A. Paradiso,et al.  Human Generated Power for Mobile Electronics , 2004 .

[18]  Nathan S. Shenck,et al.  A demonstration of useful electric energy generation from piezoceramics in a shoe , 1999 .

[19]  T.C. Green,et al.  Architectures for vibration-driven micropower generators , 2004, Journal of Microelectromechanical Systems.

[20]  Gordon M. H. Chan,et al.  PCB INTEGRATED MICRO-GENERATOR FOR WIRELESS SYSTEMS , 2000 .

[21]  Thad Starner.  Powerful Change Part 1: Batteries and Possible Alternatives for the Mobile Market , 2003, IEEE Pervasive Comput..

[22]  Thad Starner,et al.  A heat dissipation tutorial for wearable computers , 1998, Digest of Papers. Second International Symposium on Wearable Computers (Cat. No.98EX215).

[23]  F. Moll,et al.  Optimum Piezoelectric Bending Beam Structures for Energy Harvesting using Shoe Inserts , 2005 .