论文信息 - DESIGN OF STEEL PLATE SHEAR WALLS CONSIDERING INELASTIC DRIFT DEMAND

DESIGN OF STEEL PLATE SHEAR WALLS CONSIDERING INELASTIC DRIFT DEMAND

Abstract The unstiffened steel plate shear wall (SPSW) system has emerged as a promising lateral load resisting system in recent years. However, seismic code provisions for these systems are still based on elastic force-based design methodologies. Considering the ever-increasing demands of efficient and reliable design procedures, a shift towards performance-based seismic design (PBSD) procedure is proposed in this work. The proposed PBSD procedure for SPSW systems is based on a target inelastic drift and pre-selected yield mechanism. This design procedure is simple, yet it aims at an advanced design criterion. The proposed procedure is tested on a four-story test building with different steel panel aspect ratios for different target drifts under selected strong motion scenarios. The designs are checked under the selected ground motion scenarios through nonlinear response-history analyses. The actual inelastic drift demands are found to be close to the selected target drifts. In addition, the displacement profiles at peak responses are also compared with the selected yield mechanism. Future modifications required for this design procedure for different SPSW configurations are identified based on these test cases.

Anirudha Das | Siddhartha Ghosh | Farooq Adam

[1] Michel Bruneau,et al. Steel Plate Shear Walls - From Research to Codification , 2005 .

[2] Geoffrey L. Kulak,et al. Analysis of steel plate shear walls , 1983 .

[3] J. Berman,et al. PLASTIC ANALYSIS AND DESIGN OF STEEL PLATE SHEAR WALLS , 2003 .

[4] Siddhartha Ghosh,et al. Merging energy‐based design criteria and reliability‐based methods: exploring a new concept , 2006 .

[5] N. Null. Minimum Design Loads for Buildings and Other Structures , 2003 .

[6] Douglas A. Foutch,et al. Dual-level seismic design : A reliability-based methodology , 1996 .

[7] M. Bruneaua,et al. Seismic retrofit of flexible steel frames using thin infill panels , 2002 .

[8] Robert G. Driver,et al. Seismic behaviour of steel plate shear walls , 1997 .

[9] Mervyn J. Kowalsky,et al. Displacement-based seismic design of structures , 2007 .

[10] Subhash C. Goel,et al. Toward Performance-Based Seismic Design of Structures , 1999 .

[11] Geoffrey L. Kulak,et al. Experimental study of steel plate shear walls , 1983 .

[12] Soon-Sik Lee. Performance -based design of steel moment frames using target drift and yield mechanism. , 2002 .

[13] Anil K. Chopra,et al. Displacement-based seismic design of structures, M. J. N. Priestley, G. M. Calvi, and M. J. Kowalsky, IUSS Press, Pavia, Italy. ISBN: 978-88-6198-0006, 721 pp , 2008 .