Effect of differential heat treatment on the formability of aluminium tailor welded blanks

Abstract Tailor welded blanks (TWBs) are blanks that are tailor made to suit the required function. They are made by joining blanks of different thicknesses, materials, coatings, etc. The forming behaviour of such TWBs will be different from the conventional blanks, as TWBs with different strength levels will be subjected to the same forming loads but will result in unequal deformation values. The present work is aimed at studying the formability behaviour of TWBs of two different materials namely AA6061 and AA2014. The blanks were made by friction stir welding process at different rotational speeds, welding speeds and tool tilt angles on a vertical head milling machine. The formability of the TWBs and the base materials has been studied before and after solution heat treatment and analysed with the help of Limiting Dome Height (LDH) test. A differential heat treatment approach has been followed, which is unique in this work. From the results, it was found that the formability of heat treated TWBs were higher than those of base materials and untreated TWBs.

[1]  Uğur Köklü.  Investigation into the formability of Al-1050 tailor-welded blanks with antilock braking system , 2013 .

[2]  M. Xia,et al.  Effect of Laser Welding on Formability of DP980 steel , 2008 .

[3]  Dulce Maria Rodrigues,et al.  Formability of similar and dissimilar friction stir welded AA 5182-H111 and AA 6016-T4 tailored blanks , 2009 .

[4]  Deformation behaviour of welded stainless steel - carbon steel sandwich sheet material , 2007 .

[5]  M. Aghaie-Khafri.  Formability of AA8011 aluminum alloy sheet in homogenized and unhomogenized conditions , 2004 .

[6]  R. G. Narayanan,et al.  Assessing the Validity of Original and Modified Failure Criteria to Predict the Forming Limit of Unwelded and Tailor Welded Blanks with Longitudinal Weld , 2010 .

[7]  Carpóforo Vallellano,et al.  A Study to Predict Failure in Biaxially Stretched Sheets of Aluminum Alloy 2024-T3 , 2008 .

[8]  G. Venkateswarlu,et al.  Effect of overlapping ratio on mechanical properties and formability of friction stir processed Mg AZ31B alloy , 2013 .

[9]  Haydar Livatyali,et al.  Effects of sheet thickness and anisotropy on forming limit curves of AA2024-T4 , 2013 .

[10]  G. Venkateswarlu,et al.  Modelling studies of sheet metal formability of friction stir processed Mg AZ31B alloy under stretch forming , 2012 .

[11]  J. Allin,et al.  Deep drawing characteristics of automotive aluminum alloys , 1998 .

[12]  Michael Miles,et al.  Formability of friction-stir-welded dissimilar-aluminum-alloy sheets , 2005 .

[13]  Nack J. Kim,et al.  Relationship between stretch formability and work-hardening capacity of twin-roll cast Mg alloys at room temperature , 2009 .

[14]  S. Suranuntchai,et al.  Determination of Forming Limit Stress Diagram for Formability Prediction of SPCE 270 Steel Sheet , 2011 .

[15]  Luís Menezes,et al.  Deep drawing of aluminium–steel tailor-welded blanks , 2008 .

[16]  D. R. Kumar,et al.  Study of formability of tailor-welded blanks in plane-strain stretch forming , 2009 .

[17]  K. A. Padmanabhan,et al.  Biaxial Stressing of Sheets of Friction Stir Processed Aluminum Alloy A319 , 2010 .

[18]  C. L. Chow,et al.  Formability Analysis of Tailor-Welded Blanks of Different Thickness Ratios , 2005 .

[19]  Joonsik Park,et al.  Effect of Laser Welding Variables on the Formability of 3 wt% Si-Added Steel Welds , 2009 .