Design of small-scale gradient coils in magnetic resonance imaging by using the topology optimization method

A topology optimization method based on the solid isotropic material with penalization interpolation scheme is utilized for designing gradient coils for use in magnetic resonance microscopy. Unlike the popular stream function method, the proposed method has design variables that are the distribution of conductive material. A voltage-driven transverse gradient coil is proposed to be used as micro-scale magnetic resonance imaging (MRI) gradient coils, thus avoiding introducing a coil-winding pattern and simplifying the coil configuration. The proposed method avoids post-processing errors that occur when the continuous current density is approximated by discrete wires in the stream function approach. The feasibility and accuracy of the method are verified through designing the z-gradient and y-gradient coils on a cylindrical surface. Numerical design results show that the proposed method can provide a new coil layout in a compact design space.

[1]  Feng Jia,et al.  Design of a shielded coil element of a matrix gradient coil. , 2017, Journal of magnetic resonance.

[2]  Tetsuji Dohi,et al.  A Micro Saddle Coil with Switchable Sensitivity for Local High-Resolution Imaging of Luminal Tissue † , 2016, Micromachines.

[3]  J. Hennig,et al.  Design multiple-layer gradient coils using least-squares finite element method , 2014 .

[4]  O. Sigmund,et al.  Topology optimization approaches , 2013, Structural and Multidisciplinary Optimization.

[5]  Qiuliang Wang.  Finite Element Analysis for the Magnetostatic Field , 2013 .

[6]  M. F. Pantoja,et al.  Gradient-Coil Design: A Multi-Objective Problem , 2012, IEEE Transactions on Magnetics.

[7]  Zhipeng Ni,et al.  A Novel Target-Field Method Using LASSO Algorithm for Shim and Gradient Coil Design , 2012, IEEE Transactions on Applied Superconductivity.

[8]  Feng Jia,et al.  Optimization MRI Cylindrical Coils Using Discretized Stream Function With High Order Smoothness , 2012, IEEE Transactions on Magnetics.

[9]  Ling Xia,et al.  A Finite Difference Method for the Design of Gradient Coils in MRI—An Initial Framework , 2012, IEEE Transactions on Biomedical Engineering.

[10]  Ping Zhang,et al.  Topology optimization of unsteady incompressible Navier-Stokes flows , 2011, J. Comput. Phys..

[11]  Jürgen Hennig,et al.  On-chip three dimensional microcoils for MRI at the microscale. , 2010, Lab on a chip.

[12]  J. Korvink,et al.  High aspect ratio PMMA posts and characterization method for micro coils manufactured with an automatic wire bonder , 2009 .

[13]  Stuart Crozier,et al.  3-D Gradient Coil Design—Initial Theoretical Framework , 2009, IEEE Transactions on Biomedical Engineering.

[14]  Jihong Zhu,et al.  Topology optimization of heat conduction problem involving design-dependent heat load effect , 2008 .

[15]  Richard Bowtell,et al.  Novel gradient coils designed using a boundary element method , 2007 .

[16]  Qiuliang Wang,et al.  Target field approach for spherical coordinates , 2004 .

[17]  Zhu Guo-qiang,et al.  Minimum inductance optimal design for the gradient coil , 2002, Wuhan University Journal of Natural Sciences.

[18]  Ole Sigmund,et al.  Design of multiphysics actuators using topology optimization - Part I: One-material structures , 2001 .

[19]  Ole Sigmund,et al.  A 99 line topology optimization code written in Matlab , 2001 .

[20]  M. Zhou,et al.  Checkerboard and minimum member size control in topology optimization , 2001 .

[21]  D. Tomasi.  Stream function optimization for gradient coil design , 2001, Magnetic resonance in medicine.

[22]  Haiying Liu,et al.  True energy-minimal and finite-size biplanar gradient coil design for MRI , 1998, IEEE Transactions on Medical Imaging.

[23]  B. Rutt,et al.  Constrained length minimum inductance gradient coil design , 1998, Magnetic resonance in medicine.

[24]  G. Whitesides,et al.  Using microcontact printing to fabricate microcoils on capillaries for high resolution proton nuclear magnetic resonance on nanoliter volumes , 1997 .

[25]  D. Alsop,et al.  Optimization of torque‐balanced asymmetric head gradient coils , 1996, Magnetic resonance in medicine.

[26]  P C Lauterbur,et al.  Design and analysis of microcoils for NMR microscopy. , 1995, Journal of magnetic resonance. Series B.

[27]  Stuart Crozier,et al.  The Design of Transverse Gradient Coils of Restricted Length by Simulated Annealing , 1994 .

[28]  S. Pissanetzky.  Minimum energy MRI gradient coils of general geometry , 1992 .

[29]  J. Hyde,et al.  Coil optimization for MRI by conjugate gradient descent , 1991, Magnetic resonance in medicine.

[30]  M. Zhou,et al.  The COC algorithm, Part II: Topological, geometrical and generalized shape optimization , 1991 .

[31]  M. Bendsøe.  Optimal shape design as a material distribution problem , 1989 .

[32]  R. Turner.  Minimum inductance coils , 1988 .

[33]  K. Svanberg.  The method of moving asymptotes—a new method for structural optimization , 1987 .

[34]  R. Turner.  A Target Field Approach To Optimal Coil Design , 1986 .

[35]  R. Turner,et al.  Gradient coil design: a review of methods. , 1993, Magnetic resonance imaging.

[36]  E. McFarland,et al.  Three-dimensional NMR microscopy: improving SNR with temperature and microcoils. , 1992, Magnetic resonance imaging.

[37]  Carlos A. Mota Soares,et al.  Computer Aided Optimal Design: Structural and Mechanical Systems , 1987, NATO ASI Series.

[38]  P. Mansfield,et al.  'Diffraction' and microscopy in solids and liquids by NMR , 1975 .