Thermoplastic Elastomer Biocomposites Filled with Cereal Straw Fibers Obtained with Different Processing Methods—Preparation and Properties

This work is focused on thermoplastic elastomers composites (TPEs) reinforced with straw. Crop waste with different particle size was used as a filler of ethylene-octene rubber (EOR). Application of cheap and renewable natural fiber like straw into a TPE medium is not fully recognized and explored. The effect of fiber orientation induced by two processing techniques on the different mechanical properties of composites was investigated. Microscopic images were used to present the tested straw fractions and observe the arrangement and dispersion of fibers in the polymer matrix. It was found that the usage of an injection molding process allowed for the forming of a more homogenous dispersion of short fiber particles in the elastomer matrix. An oriented straw filler and polymer chains resulted in the improved mechanical strength of the whole system as evidenced by the obtained values of tensile strength almost two times higher for injected composites. In addition, all composites showed very good resistance to thermo-oxidative aging, where the aging factor oscillated within the limits of one, regardless of the processing method and the amount of bioadditive used. On the other hand, vulcanized composites were characterized by greater tear resistance, for which Fmit values increased by up to 600% compared to the reference sample.

[1]  T. Ratanawilai,et al.  Composites from Thermoplastic Natural Rubber Reinforced Rubberwood Sawdust: Effects of Sawdust Size and Content on Thermal, Physical, and Mechanical Properties , 2018, International Journal of Polymer Science.

[2]  K. Strzelec,et al.  Natural Rubber Composites Filled with Cereals Straw Modified with Acetic and Maleic Anhydride: Preparation and Properties , 2018, Journal of Polymers and the Environment.

[3]  K. Strzelec,et al.  Influence of peroxide modifications on the properties of cereal straw and natural rubber composites , 2018, Cellulose.

[4]  Rui Yang,et al.  Effect of lubricating oil on thermal aging of nitrile rubber , 2018 .

[5]  K. Strzelec,et al.  Natural rubber biocomposites containing corn, barley and wheat straw , 2017 .

[6]  N. Chen,et al.  Metallic glass-strengthened thermoplastic elastomer composites , 2017 .

[7]  L. Berglund,et al.  Experimental evaluation of anisotropy in injection molded polypropylene/wood fiber biocomposites , 2017 .

[8]  K. Nikbin,et al.  Mechanical characterization of novel latania natural fiber reinforced PP/EPDM composites , 2016 .

[9]  K. Pickering,et al.  A review of recent developments in natural fibre composites and their mechanical performance , 2016 .

[10]  A. Akdemir,et al.  Friction and wear behavior of styrene butadiene rubber‐based composites reinforced with microwave‐devulcanized ground tire rubber , 2015 .

[11]  A. Bhowmick,et al.  Tailored Nanostructured Thermoplastic Elastomers from Polypropylene and Fluoroelastomer: Morphology and Functional Properties , 2015 .

[12]  H. Celebi,et al.  Effect of carbon black and/or elastomer on thermoplastic elastomer-based blends and composites , 2015 .

[13]  Hani E. Naguib,et al.  High friction on ice provided by elastomeric fiber composites with textured surfaces , 2015 .

[14]  Z. Petrović,et al.  Biocompatible fibers from thermoplastic polyurethane reinforced with polylactic acid microfibers , 2015 .

[15]  A. Bhowmick,et al.  Dynamic vulcanization of novel nanostructured polyamide 6/ fluoroelastomer thermoplastic elastomeric blends with special reference to morphology, physical properties and degree of vulcanization , 2015 .

[16]  A. Błędzki,et al.  Progress Report on Natural Fiber Reinforced Composites , 2014 .

[17]  Nathalie Gontard,et al.  Biocomposites from wheat proteins and fibers: Structure/mechanical properties relationships , 2013 .

[18]  B. F. Yousif,et al.  A review on the degradability of polymeric composites based on natural fibres , 2013 .

[19]  K. Karakuş,et al.  Mechanical properties of injection-molded foamed wheat straw filled HDPE biocomposites: The effects of filler loading and coupling agent contents , 2012, BioResources.

[20]  A. Kosmalska,et al.  Eco-friendly elastomeric composites containing Sencha and Gun Powder green tea extracts , 2011 .

[21]  Hao Wang,et al.  A review on the tensile properties of natural fiber reinforced polymer composites , 2011 .

[22]  H. Anuar,et al.  Improvement in mechanical properties of reinforced thermoplastic elastomer composite with kenaf bast fibre , 2011 .

[23]  G. Holden.  6 – Thermoplastic Elastomers , 2011 .

[24]  Y. Dahman,et al.  Assessment of pretreatments and enzymatic hydrolysis of wheat straw as a sugar source for bioprocess industry. , 2011 .

[25]  L. Simon,et al.  Preparation and characterization of polypropylene–wheat straw–clay composites , 2010 .

[26]  W. Hall,et al.  A review of bast fibres and their composites. Part 1 – Fibres as reinforcements , 2010 .

[27]  H. Anuar,et al.  The Mechanical and Physical Properties of Thermoplastic Natural Rubber Hybrid Composites Reinforced with Hibiscus cannabinus, L and Short Glass Fiber , 2010 .

[28]  S.Y. Zhang,et al.  Preparation and Properties of Wheat Straw Fiber-polypropylene Composites. Part II. Investigation of Surface Treatments on the Thermo-mechanical and Rheological Properties of the Composites , 2010 .

[29]  G. Ebrahimi,et al.  Effect of MAPE on Mechanical and Morphological Properties of Wheat Straw/HDPE Injection Molded Composites , 2010 .

[30]  S. Y. Zhang,et al.  Effect of steam explosion treatment on characteristics of wheat straw. , 2010 .

[31]  Y. S. Negi,et al.  Recent Development in Natural Fiber Reinforced Polypropylene Composites , 2009 .

[32]  M. Sain,et al.  Bioprocess preparation of wheat straw fibers and their characterization , 2006 .

[33]  M Sain,et al.  Preparation and characterization of wheat straw fibers for reinforcing application in injection molded thermoplastic composites. , 2006, Bioresource technology.

[34]  Sung‐Seen Choi.  Influence of internal strain on change of crosslink density of natural rubber vulcanizates by thermal ageing , 2001 .

[35]  B. Anfimov,et al.  Equilibrium swelling of filled vulcanizates of natural rubber , 1982 .

[36]  P. Flory,et al.  STATISTICAL MECHANICS OF CROSS-LINKED POLYMER NETWORKS II. SWELLING , 1943 .