Advances in near-neutral salts activation of blast furnace slags

The utilisation of near-neutral salts as activators to produce alkali-activated slag cements offers several technical advantages, including reduced alkalinity of the binders, minimising the risk associated with handling of highly alkaline materials, and better workability of the fresh paste compared to that of sodium silicate-activated slag cements. Despite these evident advantages, the delayed setting and slow early-age mechanical strength development of these cements have limited their adoption and commercialisation. Recent studies have demonstrated that these limitations can be overcome by selecting slags with chemistry which is more prone to react with near-neutral salts, or by adding mineral additives. A brief overview of the most recent advances in alkali-activation of slags using either sodium carbonate or sodium sulfate as activators is reported, highlighting the role of material design parameters in the kinetics of reaction and phase evolution of these cements, as well as the perspectives for research and development of these materials.

[1]  V. Zivica.  Effectiveness of new silica fume alkali activator , 2006 .

[2]  C. Shi,et al.  New cements for the 21st century: The pursuit of an alternative to Portland cement , 2011 .

[3]  N. Roussel,et al.  An environmental evaluation of geopolymer based concrete production: reviewing current research trends , 2011 .

[4]  J. Provis,et al.  Binder Chemistry – Low-Calcium Alkali-Activated Materials , 2014 .

[5]  Xinyuan Ke,et al.  Controlling the reaction kinetics of sodium carbonate-activated slag cements using calcined layered double hydroxides , 2016 .

[6]  Maxim Kovtun,et al.  Chemical acceleration of a neutral granulated blast-furnace slag activated by sodium carbonate , 2015 .

[7]  Erich D. Rodríguez,et al.  Performance at high temperature of alkali-activated slag pastes produced with silica fume and rice husk ash based activators , 2015 .

[8]  Erich D. Rodríguez,et al.  Performance of alkali-activated slag mortars exposed to acids , 2012 .

[9]  M. Barsoum,et al.  Chemical and Microstructural Characterization of 20‐Month‐Old Alkali‐Activated Slag Cements , 2010 .

[10]  F. Puertas,et al.  Structure of Calcium Silicate Hydrates Formed in Alkaline-Activated Slag: Influence of the Type of Alkaline Activator , 2003 .

[11]  P. Brown,et al.  The formation of calcium sulfoaluminate hydrate compounds: Part II , 1999 .

[12]  Rupert J. Myers,et al.  A thermodynamic model for C-(N-)A-S-H gel: CNASH_ss. Derivation and validation , 2014 .

[13]  Francisca Puertas,et al.  Setting of alkali-activated slag cement. Influence of activator nature , 2001 .

[14]  Alexander J. Moseson.  Design and Implementation of Alkali Activated Cement For Sustainable Development , 2011 .

[15]  J. Provis,et al.  Advances in understanding alkali-activated materials , 2015 .

[16]  G. Steinhauser.  Cleaner production in the Solvay Process: general strategies and recent developments , 2008 .

[17]  John L. Provis,et al.  Engineering and durability properties of concretes based on alkali-activated granulated blast furnac , 2012 .

[18]  J. I. Escalante-García,et al.  Hydration Products and Reactivity of Blast‐Furnace Slag Activated by Various Alkalis , 2003 .

[19]  V. Rose,et al.  High‐Resolution X‐ray Diffraction and Fluorescence Microscopy Characterization of Alkali‐Activated Slag‐Metakaolin Binders , 2013 .

[20]  Guillaume Habert,et al.  Recent update on the environmental impact of geopolymers , 2016 .

[21]  Francisca Puertas,et al.  Hormigón alternativo basado en escorias activadas alcalinamente , 2008 .

[22]  E. Douglas,et al.  A preliminary study on the alkali activation of ground granulated blast-furnace slag , 1990 .

[23]  S. Bernal,et al.  Structural evolution of an alkali sulfate activated slag cement , 2016 .

[24]  S. Bernal,et al.  Characterisation of Ba(OH){sub 2}–Na{sub 2}SO{sub 4}–blast furnace slag cement-like composites for the immobilisation of sulfate bearing nuclear wastes , 2014 .

[25]  Neil B. Milestone,et al.  The potential for using slags activated with near neutral salts as immobilisation matrices for nuclear wastes containing reactive metals , 2011 .

[26]  John L. Provis,et al.  The fate of iron in blast furnace slag particles during alkali-activation , 2014 .

[27]  S. Bernal,et al.  High-temperature performance of mortars and concretes based on alkali-activated slag/metakaolin blends , 2012 .

[28]  S. Bernal,et al.  Role of carbonates in the chemical evolution of sodium carbonate-activated slag binders , 2015 .

[29]  John L. Provis,et al.  Activation of Metakaolin/Slag Blends Using Alkaline Solutions Based on Chemically Modified Silica Fume and Rice Husk Ash , 2012 .

[30]  Anja Buchwald,et al.  Demonstration Projects and Applications in Building and Civil Infrastructure , 2014 .

[31]  John L. Provis,et al.  Influence of fly ash on the water and chloride permeability of alkali-activated slag mortars and concretes , 2013 .

[32]  Adam R. Kilcullen,et al.  Gel nanostructure in alkali-activated binders based on slag and fly ash, and effects of accelerated , 2013 .

[33]  S. Bernal,et al.  Geopolymers and Related Alkali-Activated Materials , 2014 .

[34]  B. Lothenbach,et al.  Thermodynamic modelling of alkali-activated slag cements , 2015 .

[35]  J. Deventer,et al.  Historical Aspects and Overview , 2014 .

[36]  J. Deventer,et al.  MgO content of slag controls phase evolution and structural changes induced by accelerated carbonation in alkali-activated binders , 2014 .

[37]  Neil B. Milestone,et al.  Hydration and properties of sodium sulfate activated slag , 2013 .

[38]  P. Basheer,et al.  Chemical and Mechanical Stability of Sodium Sulfate Activated Slag after Exposure to Elevated Temperature , 2012 .

[39]  John L. Provis,et al.  Management and valorisation of wastes through use in producing alkali‐activated cement materials , 2016 .

[40]  Hua Xu,et al.  Characterization of Aged Slag Concretes , 2008 .