Spark plasma sintering of Al-doped ZrB2–SiC composite

[1]  Seyed Ali Delbari,et al.  Spark plasma sintering of TiN ceramics codoped with SiC and CNT , 2019, Ceramics International.

[2]  Mehdi Shahedi Asl,et al.  Microstructure and thermomechanical characteristics of spark plasma sintered TiC ceramics doped with nano-sized WC , 2019, Ceramics International.

[3]  Mehdi Shahedi Asl,et al.  Spark plasma sintering of TiAl–Ti3AlC2 composite , 2018, Ceramics International.

[4]  Mehdi Shahedi Asl,et al.  Phase evolution during spark plasma sintering of novel Si3N4-doped TiB2–SiC composite , 2018, Materials Characterization.

[5]  Mehdi Shahedi Asl,et al.  Reinforcing effects of SiC whiskers and carbon nanoparticles in spark plasma sintered ZrB2 matrix composites , 2018, Ceramics International.

[6]  Mehdi Shahedi Asl,et al.  Microstructural development during spark plasma sintering of ZrB2–SiC–Ti composite , 2018, Ceramics International.

[7]  Mehdi Shahedi Asl,et al.  TEM characterization of spark plasma sintered ZrB2–SiC–graphene nanocomposite , 2018, Ceramics International.

[8]  Mehdi Shahedi Asl,et al.  Synergistic effects of graphite nano-flakes and submicron SiC particles on the characteristics of spark plasma sintered ZrB2 nanocomposites , 2018, International Journal of Refractory Metals and Hard Materials.

[9]  Mehdi Shahedi Asl,et al.  Effects of spark plasma sintering temperature on densification, hardness and thermal conductivity of titanium carbide , 2018, Ceramics International.

[10]  Mehdi Shahedi Asl,et al.  Microstructural investigation of spark plasma sintered TiB2 ceramics with Si3N4 addition , 2018, Ceramics International.

[11]  Mehdi Shahedi Asl,et al.  A novel ZrB2–VB2–ZrC composite fabricated by reactive spark plasma sintering , 2018, Materials Science and Engineering: A.

[12]  Mehdi Shahedi Asl,et al.  Densification improvement of spark plasma sintered TiB2-based composites with micron-, submicron- and nano-sized SiC particulates , 2018, Ceramics International.

[13]  Mehdi Shahedi Asl,et al.  Self-propagating high-temperature synthesis of Ti3AlC2 MAX phase from mechanically-activated Ti/Al/graphite powder mixture , 2018, Ceramics International.

[14]  Mehdi Shahedi Asl,et al.  Effects of carbon additives on the properties of ZrB2–based composites: A review , 2018 .

[15]  Mehdi Shahedi Asl.  A statistical approach towards processing optimization of ZrB2–SiC–graphite nanocomposites. Part I: Relative density , 2018 .

[16]  Mehdi Shahedi Asl,et al.  Effects of nano-graphite content on the characteristics of spark plasma sintered ZrB2–SiC composites , 2018 .

[17]  Mehdi Shahedi Asl,et al.  Effects of sintering temperature on microstructure and mechanical properties of spark plasma sintered titanium , 2018 .

[18]  R. Srivastava,et al.  Influence of Powder-Chip Based Reinforcement on Tensile Properties and Fracture Behaviors of LM6 Aluminum Alloy , 2018, Transactions of the Indian Institute of Metals.

[19]  Mehdi Shahedi Asl.  Microstructure, hardness and fracture toughness of spark plasma sintered ZrB2–SiC–Cf composites , 2017 .

[20]  Mehdi Shahedi Asl,et al.  Contribution of SiC particle size and spark plasma sintering conditions on grain growth and hardness of TiB2 composites , 2017 .

[21]  Mehdi Shahedi Asl,et al.  Effects of in-situ formed TiB whiskers on microstructure and mechanical properties of spark plasma sintered Ti–B4C and Ti–TiB2 composites , 2017 .

[22]  Mehdi Shahedi Asl,et al.  Sintering behavior of ZrB2–SiC composites doped with Si3N4: A fractographical approach , 2017 .

[23]  Mehdi Shahedi Asl,et al.  Optimization of effective parameters on thermal shock resistance of ZrB2-SiC-based composites prepared by SPS: Using Taguchi design , 2017 .

[24]  Mehdi Shahedi Asl,et al.  Densification, microstructure and mechanical properties of hot pressed ZrB2–SiC ceramic doped with nano-sized carbon black , 2017 .

[25]  Mehdi Shahedi Asl,et al.  Effect of TiB2 content on the characteristics of spark plasma sintered Ti–TiBw composites , 2017 .

[26]  M. Davidson,et al.  Effect of deformation on densification and corrosion behavior of Al-ZrB2 composite , 2017 .

[27]  Mehdi Shahedi Asl,et al.  Effect of different additives and open porosity on fracture toughness of ZrB2–SiC-based composites prepared by SPS , 2017 .

[28]  Mehdi Shahedi Asl,et al.  Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part II: Grain growth , 2016 .

[29]  Mehdi Shahedi Asl,et al.  Characterization of hot pressed SiC whisker reinforced TiB2 based composites , 2016 .

[30]  Mehdi Shahedi Asl,et al.  Interfacial phenomena and formation of nano-particles in porous ZrB2–40 vol% B4C UHTC , 2016 .

[31]  K. Das,et al.  Characterization of microstructure and properties of Al–Al3Zr–Al2O3 composite , 2016, Bulletin of Materials Science.

[32]  B. Basu,et al.  Development of ZrB2–SiC–Ti by multi stage spark plasma sintering at 1600°C , 2016 .

[33]  Mehdi Shahedi Asl,et al.  Influence of silicon carbide addition on the microstructural development of hot pressed zirconium and titanium diborides , 2016 .

[34]  Mehdi Shahedi Asl,et al.  Synergetic effects of SiC and Csf in ZrB2-based ceramic composites. Part I: Densification behavior , 2016 .

[35]  Mehdi Shahedi Asl,et al.  Characteristics of dynamically formed oxide films in aluminum–calcium foamable alloys , 2016 .

[36]  Mehdi Shahedi Asl,et al.  Characteristics of multi-walled carbon nanotube toughened ZrB2–SiC ceramic composite prepared by hot pressing , 2016 .

[37]  Mehdi Shahedi Asl,et al.  Temperature dependence of microstructure evolution during hot pressing of ZrB2–30 vol.% SiC composites , 2016 .

[38]  Mehdi Shahedi Asl,et al.  Fractographical characterization of hot pressed and pressureless sintered SiAlON-doped ZrB2-SiC composites , 2015 .

[39]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters and reinforcement size on sinterability and mechanical properties of ZrB2–25 vol% SiC UHTCs , 2015 .

[40]  Mehdi Shahedi Asl,et al.  Reactive hot pressing of ZrB2-based composites with changes in ZrO2/SiC ratio and sintering conditions. Part I: Densification behavior , 2015 .

[41]  Mehdi Shahedi Asl,et al.  Microstructural development and mechanical properties of hot pressed SiC reinforced TiB2 based composite , 2015 .

[42]  Mehdi Shahedi Asl,et al.  A Taguchi approach to the influence of hot pressing parameters and SiC content on the sinterability of ZrB2-based composites , 2015 .

[43]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters and reinforcement size on densification behavior of ZrB2–25 vol% SiC UHTCs , 2015 .

[44]  Mehdi Shahedi Asl,et al.  Taguchi analysis on the effect of hot pressing parameters on density and hardness of zirconium diboride , 2015 .

[45]  Mehdi Shahedi Asl,et al.  Influence of graphite nano-flakes on densification and mechanical properties of hot-pressed ZrB2–SiC composite , 2015 .

[46]  Mehdi Shahedi Asl,et al.  Significance of hot pressing parameters on the microstructure and densification behavior of zirconium diboride , 2015 .

[47]  A. Pakseresht,et al.  Investigation on microstructure and mechanical behavior of Al–ZrB2 composite prepared by microwave and spark plasma sintering , 2015 .

[48]  Mehdi Shahedi Asl,et al.  Characterization of hot-pressed graphene reinforced ZrB 2 –SiC composite , 2015 .

[49]  Mehdi Shahedi Asl,et al.  Hardness and toughness of hot pressed ZrB2–SiC composites consolidated under relatively low pressure , 2015 .

[50]  Mehdi Shahedi Asl,et al.  A fractographical approach to the sintering process in porous ZrB2–B4C binary composites , 2015 .

[51]  Mehdi Shahedi Asl,et al.  Fractographical assessment of densification mechanisms in hot pressed ZrB2-SiC composites , 2014 .

[52]  M. Zakeri,et al.  Mechanical properties of pressure-less sintered ZrB2 with molybdenum, iron and carbon additives , 2014 .

[53]  Peng Lü.  A Comparison between B4C-ZrB2-Al Composite and B4C-Al Composite on Microstructure and Mechanical Properties , 2011 .

[54]  Qiang Liu,et al.  ZrB2-ceramic toughened by refractory metal Nb prepared by hot-pressing , 2010 .

[55]  D. Fang,et al.  Preparation and characterization of high-toughness ZrB2/Mo composites by hot-pressing process , 2009 .

[56]  G. Hilmas,et al.  Pressureless Sintering of ZrB2–SiC Ceramics , 2007 .

[57]  Gang Chen,et al.  Effects of molten temperature on the morphologies of in situ Al3Zr and ZrB2 particles and wear properties of (Al3Zr + ZrB2)/Al composites , 2007 .

[58]  Gang Chen,et al.  Microstructures and dry sliding wear properties of in situ (Al3Zr + ZrB2)/Al composites , 2007 .

[59]  William G. Fahrenholtz,et al.  Thermodynamic Analysis of ZrB2–SiC Oxidation: Formation of a SiC‐Depleted Region , 2007 .

[60]  Zheng-ren Huang,et al.  Pressureless Sintering of High‐Density ZrB2–SiC Ceramic Composites , 2006 .

[61]  Doh-Yeon Kim,et al.  Densification and properties of transition metal borides-based cermets via spark plasma sintering , 2006 .

[62]  A. Khanra,et al.  Effect of Ni additives on pressureless sintering of SHS ZrB2 , 2005 .

[63]  Swapan Das,et al.  Effect of Fe and Cr Addition on the Sintering Behavior of ZrB2 Produced by Self‐Propagating High‐Temperature Synthesis , 2004 .

[64]  Donald T. Ellerby,et al.  High‐Strength Zirconium Diboride‐Based Ceramics , 2004 .

[65]  K. Shim,et al.  The effect of lanthanum on the fabrication of ZrB2–ZrC composites by spark plasma sintering , 2003 .

[66]  †. J.J.Meléndez-Martínez,et al.  Characterisation and high temperature mechanical properties of zirconium boride-based materials , 2002 .

[67]  Zhanpeng Jin,et al.  Thermodynamic assessment of the Al-Zr binary system , 2001 .

[68]  M. A. Kuzenkova,et al.  Regularities of sintering of zirconium diboride-molybenum alloys , 1966 .

[69]  J. Sejbal,et al.  SINTERING OF ZIRCONIUM BORIDE WITH ACTIVATING ADDITIONS , 1965 .

[70]  M. L. Misra.  Sillimanite in India , 1944 .