A methodology and model for the pull-in parameters of electrostatic actuators

This paper presents a generalized model for the pull-in phenomenon in electrostatic actuators with a single input, either charge or voltage. The pull-in phenomenon of a general electrostatic actuator with a single input is represented by an algebraic equation referred to as the pull-in equation. This equation directly yields the pull-in parameters, namely, the pull-in voltage or pull-in charge and the pull-in displacement. The model presented here permits the analysis of a wide range of cases, including nonlinear mechanical effects as well as various nonlinear, nonideal, and parasitic electrical effects. In some of the cases, an analytic solution is derived, which provides physical insight into how the pull-in parameters depend upon the design and properties of the actuator. The pull-in equation can also yield rapid numerical solutions, allowing interactive and optimal design. The model is then utilized to analyze analytically the case of a Duffing spring, previously analyzed numerically by Hung and Senturia, and captures the variations of the pull-in parameters in the continuum between a perfectly linear spring and a cubic spring. Several other case studies are described and analyzed using the pull-in equation, including parallel-plate and tilted-plate (torsion) actuators taking into account the fringing field capacitance, feedback and parasitic capacitance, trapped charges, an external force, and large displacements.

[1]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[2]  H. B. Palmer.  The capacitance of a parallel-plate capacitor by the Schwartz-Christoffel transformation , 1937, Electrical Engineering.

[3]  Ralph Judson Smith,et al.  Circuits, devices and systems , 1966 .

[4]  Charles A. Desoer,et al.  Basic Circuit Theory , 1969 .

[5]  拉里·J·霍恩贝克.  Spatial light modulator and method , 1989 .

[6]  Hermann A. Haus,et al.  Electromagnetic Fields And Energy , 1989 .

[7]  Larry J. Hornbeck,et al.  Deformable-Mirror Spatial Light Modulators , 1990, Optics & Photonics.

[8]  R. A. Perala,et al.  The effects of simulated electromagnetic pulse on commercial aircraft , 1991 .

[9]  S. Senturia,et al.  Self-consistent simulation and modelling of electrostatically deformed diaphragms , 1994, Proceedings IEEE Micro Electro Mechanical Systems An Investigation of Micro Structures, Sensors, Actuators, Machines and Robotic Systems.

[10]  Peter M. Osterberg,et al.  Electrostatically actuated microelectromechanical test structures for material property measurement , 1995 .

[11]  B. Boser,et al.  Surface micromachined accelerometers , 1995, Proceedings of the IEEE 1995 Custom Integrated Circuits Conference.

[12]  Hiroshi Toshiyoshi,et al.  An Electrostatically Operated Torsion Mirror For Optical Switching Device , 1995, Proceedings of the International Solid-State Sensors and Actuators Conference - TRANSDUCERS '95.

[13]  J. Fluitman,et al.  Electrostatic curved electrode actuators , 1995, Proceedings IEEE Micro Electro Mechanical Systems. 1995.

[14]  Mark G. Allen,et al.  ERRATUM: An energy-based design criterion for magnetic microactuators , 1996 .

[15]  H. Fujita,et al.  Electrostatic micro torsion mirrors for an optical switch matrix , 1996 .

[16]  Yong-Kweon Kim,et al.  Design and fabrication of micromirror supported by electroplated nickel posts , 1996 .

[17]  P. Sarro,et al.  Electrostatic aluminum micromirrors using double-pass metallization , 1997 .

[18]  P. Zavracky,et al.  Micromechanical switches fabricated using nickel surface micromachining , 1997 .

[19]  Raj K. Gupta,et al.  Electrostatic pull-in test structure design for in-situ mechanical property measurements of microelectromechanical systems (MEMS) , 1997 .

[20]  S. Senturia,et al.  M-TEST: A test chip for MEMS material property measurement using electrostatically actuated test structures , 1997 .

[21]  E Gerhard,et al.  Design and fabrication of a current-pulse-excited bistable magnetic microactuator , 1997 .

[22]  M. Gretillat,et al.  Vertical mirrors fabricated by deep reactive ion etching for fiber-optic switching applications , 1997 .

[23]  R. Muller,et al.  Magnetically actuated, addressable microstructures , 1997 .

[24]  J. Seeger,et al.  Stabilization of electrostatically actuated mechanical devices , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[25]  A. Maciossek,et al.  Infrared micromirror array with large pixel size and large deflection angle , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[26]  D. J. Hamilton,et al.  Polysilicon process development for fully integrated surfacemicromachined accelerometer with CMOS electronics , 1998 .

[27]  Gabriel M. Rebeiz,et al.  Micromachined devices for wireless communications , 1998, Proc. IEEE.

[28]  M. Fischer,et al.  Electrostatically deflectable polysilicon micromirrors — dynamic behaviour and comparison with the results from FEM modelling with ANSYS , 1998 .

[29]  Oliver Brand,et al.  Fully integrated magnetically actuated micromachined relays , 1998 .

[30]  Stella W. Pang,et al.  High-aspect-ratio Si vertical micromirror arrays for optical switching , 1998 .

[31]  H. Fujita,et al.  Microactuators and micromachines , 1998, Proc. IEEE.

[32]  Hai-Qing Gong,et al.  A novel integrated silicon capacitive microphone-floating electrode "electret" microphone (FEEM) , 1998 .

[33]  O. Degani,et al.  Pull-in study of an electrostatic torsion microactuator , 1998 .

[34]  Eran Socher,et al.  Optimal design and noise consideration of micromachined vibrating rate gyroscope with modulated integrative differential optical sensing , 1998 .

[35]  G. Kino,et al.  Silicon-micromachined scanning confocal optical microscope , 1998 .

[36]  E. S. Hung,et al.  Extending the travel range of analog-tuned electrostatic actuators , 1999 .

[37]  R. Dutton,et al.  Characterization of contact electromechanics through capacitance-voltage measurements and simulations , 1999 .

[38]  L. K. Lagorce,et al.  Magnetic microactuators based on polymer magnets , 1999 .

[39]  C.H. Mastrangelo,et al.  A low-voltage force-balanced pressure sensor with hermetically sealed servomechanism , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[40]  J. Kang,et al.  Surface micromachined multi-layer moving gate field effect transistor (MOGFET) pressure switch with integrated vacuum sealed cavity , 1999, Technical Digest. IEEE International MEMS 99 Conference. Twelfth IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.99CH36291).

[41]  Y. W. Yi,et al.  Magnetic actuation of hinged microstructures , 1999 .

[42]  H. Camon,et al.  Fabrication, simulation and experiment of a rotating electrostatic silicon mirror with large angular deflection , 2000, Proceedings IEEE Thirteenth Annual International Conference on Micro Electro Mechanical Systems (Cat. No.00CH36308).

[43]  R.W. Dutton,et al.  Electrostatic micromechanical actuator with extended range of travel , 2000, Journal of Microelectromechanical Systems.

[44]  Hiroyuki Fujita,et al.  Magnetic actuation of bending and torsional vibrations for 2D optical-scanner application , 2000 .

[45]  M. Capanu,et al.  Design, fabrication, and testing of a bistable electromagnetically actuated microvalve , 2000, Journal of Microelectromechanical Systems.

[46]  K. R. Farmer,et al.  Extending the travel range of electrostatic micro-mirrors using insulator coated electrodes , 2000, 2000 IEEE/LEOS International Conference on Optical MEMS (Cat. No.00EX399).

[47]  A Latching, Bistable Optical Fiber Switch Combining LIGA Technology with Micromachined Permanent Magnets , 2001 .

[48]  Hiroyuki Fujita,et al.  Self-aligned vertical mirror and V-grooves applied to an optical-switch: modeling and optimization of bi-stable operation by electromagnetic actuation , 2001 .

[49]  D. Piguet,et al.  The MicroReed, an ultra-small passive MEMS magnetic proximity sensor designed for portable applications , 2001, Technical Digest. MEMS 2001. 14th IEEE International Conference on Micro Electro Mechanical Systems (Cat. No.01CH37090).

[50]  Ole Hansen,et al.  Magnetic Flux Generator for Balanced Membrane Loudspeaker , 2002 .

[51]  C. Ahn,et al.  A bidirectional magnetic microactuator using electroplated permanent magnet arrays , 2002 .