Electrostatic forces and micromanipulator design: on the importance of surface topography parameters

Micro manipulations of objects between 10 mum and 1 mm by contact are often disturbed by the surface forces appearing between the handled object and the gripper. They may overcome gravity and prevent the release of the object. Capillary, electrostatic and van der Waals forces are the main surface forces responsible for this adhesive phenomenon. Several factors may influence these forces such as the materials in contact, the fabrication process, the surface treatments or the surface contaminations. All of these contribute to shape the topography of the surface. In this paper is investigated in which way surface roughness could be used to overcome the problem of adhesive electrostatic forces. Simulations are performed for smooth surfaces and for rough surfaces in order to study the influence of surface topography. The simulation tool is validated using analytical models for the smooth case and shows a good correlation. Roughness is modeled using a fractal representation (Weierstrass-Mandelbrot function). The simulations using fractal representation show a significant influence of the surface topography at small separation distances and correlate experimental benchmarks from literature. Topography of the surface should not be neglected in micromanipulator design.

[1]  Stephane Regnier,et al.  Analysis of forces for micromanipulations in dry and liquid media , 2006 .

[2]  David J. Whitehouse,et al.  Fractal or fiction , 2001 .

[3]  Margaritis Kostoglou,et al.  Effect of Roughness on Energy of Repulsion between Colloidal Surfaces , 1995 .

[4]  K. Komvopoulos.  Surface engineering and microtribology for microelectromechanical systems , 1996 .

[5]  Bharat Bhushan,et al.  Generalized fractal analysis and its applications to engineering surfaces , 1995 .

[6]  Anne Gelb,et al.  Roughness models for particle adhesion. , 2004, Journal of colloid and interface science.

[7]  Bharat Bhushan,et al.  Adhesion and stiction: Mechanisms, measurement techniques, and methods for reduction , 2003 .

[8]  K. Papadopoulos,et al.  Effects of asperities on the van der Waals and electric double-layer interactions of two parallel flat plates , 1990 .

[9]  Jacob N. Israelachvili,et al.  The nature of van der waals forces , 1974 .

[10]  A. Majumdar,et al.  Fractal characterization and simulation of rough surfaces , 1990 .

[11]  Lakkapragada Suresh,et al.  Effect of Surface Roughness on the Interaction Energy between a Colloidal Sphere and a Flat Plate , 1996 .

[12]  J. J. Sáenz,et al.  Effective tip radius in electrostatic force microscopy , 2005 .

[13]  Brij M Moudgil,et al.  Capillary forces between surfaces with nanoscale roughness. , 2002, Advances in colloid and interface science.

[14]  A. M. Baró,et al.  Electrostatic and contact forces in force microscopy , 1991 .

[15]  Alain Delchambre,et al.  A study of capillary forces as a gripping principle , 2004 .

[16]  K. Komvopoulos,et al.  A Fractal Analysis of Stiction in Microelectromechanical Systems , 1997 .

[17]  G. Dietler,et al.  Force-distance curves by atomic force microscopy , 1999 .

[18]  H. von Känel,et al.  AFM-study of sticking effects for microparts handling , 2000 .

[19]  M. Berry,et al.  On the Weierstrass-Mandelbrot fractal function , 1980, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[20]  R. A. Bowling,et al.  A Theoretical Review of Particle Adhesion , 1988 .

[21]  Ronald S. Fearing,et al.  Survey of sticking effects for micro parts handling , 1995, Proceedings 1995 IEEE/RSJ International Conference on Intelligent Robots and Systems. Human Robot Interaction and Cooperative Robots.

[22]  S. Hudlet,et al.  Evaluation of the capacitive force between an atomic force microscopy tip and a metallic surface , 1998 .

[23]  Shirong Ge,et al.  Experimental study on the characterization of worn surface topography with characteristic roughness parameter , 2003 .

[24]  D. Ando,et al.  Micro Manipulation Based on Micro Physics , 2001 .

[25]  Stephane Regnier,et al.  Simulation of micro-manipulations: Adhesion forces and specific dynamic models , 1999 .

[26]  L. He,et al.  The fractal character of processed metal surfaces , 1997 .

[27]  B. Bhushan,et al.  Role of Fractal Geometry in Roughness Characterization and Contact Mechanics of Surfaces , 1990 .

[28]  Stephane Regnier,et al.  Surface and contact forces models within the framework of microassembly , 2006 .

[29]  P. Girard,et al.  ELECTROSTATIC FORCES ACTING ON THE TIP IN ATOMIC FORCE MICROSCOPY : MODELIZATION AND COMPARISON WITH ANALYTIC EXPRESSIONS , 1997 .

[30]  H. Butt,et al.  Force measurements with the atomic force microscope: Technique, interpretation and applications , 2005 .