Research Trends for Mechanical Characterization of MEMS Materials in Korea: Research Needs and New Developments

The mechanical properties of microelectromechanical system (MEMS) materials are the basic parameters for designing MEMS devices and evaluating their reliability. The methods used to measure them, however, are not yet well established, and several unresolved issues require further investigation. In this paper, we introduce recent work on the mechanical characterization of MEMS materials in Korea with an emphasis on research needs and new developments. After a description of the research needs of MEMS industries, research activities on tensile and fatigue tests are introduced. Because of a strong interest in simpler test methods in Korea, their concepts and technical issues are described, especially for indentation, strip-bending, and pillar compression tests. Some techniques based on atomic force microscope (AFM) are also introduced as new research activities. © 2008 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.

[1]  Chung-Seog Oh,et al.  Comparison of the Young’s modulus of polysilicon film by tensile testing and nanoindentation , 2005 .

[2]  H.-J. Lee,et al.  Specimen aligning techniques in tensile and fatigue tests for thin films , 2007 .

[3]  Yun Jae Kim,et al.  Fatigue Test of Al-3%Ti Using Axial Loading Testing Machine for RF MEMS Switch , 2005 .

[4]  Sung-Hoon Choa,et al.  MECHANICAL BEHAVIOR OF FREESTANDING Mo THIN FILMS FOR RF–MEMS DEVICES , 2006 .

[5]  Yong-Kweon Kim,et al.  A Study of Nano-Indentation Test Using Rhombus-Shaped Cantilever in Atomic Force Microscope , 2006 .

[6]  Julia R. Greer,et al.  Size dependence of mechanical properties of gold at the micron scale in the absence of strain gradients , 2005 .

[7]  M. A. Haque,et al.  Mechanical behavior of 30–50 nm thick aluminum films under uniaxial tension , 2002 .

[8]  H.-J. Lee,et al.  Linear analysis of the viscoelastic response of polymer micro-pillars using the open-loop flat punch indentation test , 2006 .

[9]  Lin Huang,et al.  Eliminating Lateral Forces During AFM Indentation , 2007 .

[10]  G. Pharr,et al.  An improved technique for determining hardness and elastic modulus using load and displacement sensing indentation experiments , 1992 .

[11]  Seung Woo Han,et al.  Force-Calibrated AFM for Mechanical Test of Freestanding Thin Films , 2005 .

[12]  Yun-Jae Kim,et al.  Tensile and high cycle fatigue test of copper thin film , 2008 .

[13]  Seung Woo Han,et al.  Measurement of Mechanical Properties for Thin Film Using Visual Image Tracing Method , 2007 .

[14]  Horacio Dante Espinosa,et al.  A methodology for determining mechanical properties of freestanding thin films and MEMS materials , 2003 .