Tensile properties and hardness of two types of 11Cr-ferritic/martensitic steel after aging up to 45,000 h

[1]  S. Ohtsuka,et al.  Weldability of dissimilar joint between PNC-FMS and Type 316 steel under electron beam welding , 2014 .

[2]  Masahiro Ito,et al.  Resistance spot weldability of 11Cr–ferritic/martensitic steel sheets , 2012 .

[3]  Y. Murata,et al.  Dislocation Density of Lath Martensite in 10Cr-5W Heat-Resistant Steels , 2011 .

[4]  Kouichi Maruyama,et al.  Premature creep failure in strength enhanced high Cr ferritic steels caused by static recovery of tempered martensite lath structures , 2010 .

[5]  Seiichi Watanabe,et al.  Mechanical properties and microstructural stability of 11Cr-ferritic/martensitic steel cladding under irradiation , 2010 .

[6]  Y. Yano,et al.  Tensile and transient burst properties of advanced ferritic/martensitic steel claddings after neutron irradiation , 2007 .

[7]  T. Koyama,et al.  Estimation of the System Free Energy of Martensite Phase in an Fe-Cr-C Ternary Alloy , 2005 .

[8]  Gary S. Was,et al.  The relationship between hardness and yield stress in irradiated austenitic and ferritic steels , 2005 .

[9]  M. E. Kassner.  Taylor hardening in five-power-law creep of metals and Class M alloys , 2004 .

[10]  T. Hanamura,et al.  Phosphorus-induced dislocation structure variation in the warm-rolled ultrafine-grained low-carbon steels , 2003 .

[11]  S. Zinkle,et al.  On the relationship between uniaxial yield strength and resolved shear stress in polycrystalline materials , 2000 .

[12]  T. Mizuno,et al.  Tensile Properties of llCr-0.5Mo-2W, V, Nb Stainless Steel in LMFBR Environment , 2000 .

[13]  A. Borbely,et al.  The contrast factors of dislocations in cubic crystals: the dislocation model of strain anisotropy in practice , 1999 .

[14]  Tamás Ungár,et al.  The effect of dislocation contrast on x‐ray line broadening: A new approach to line profile analysis , 1996 .

[15]  F. Garner,et al.  Irradiation creep and void swelling of two LMR heats of HT9 at ∼ 400°C and 165 dpa , 1996 .

[16]  J. E. Bailey,et al.  The dislocation distribution, flow stress, and stored energy in cold-worked polycrystalline silver , 1960 .

[17]  D. Tabor.  The physical meaning of indentation and scratch hardness , 1956 .