Thermal performance of mechanical seals with textured side-wall

Abstract Experimental measurements and numerical simulations are presented to show the effectiveness of cooling of a mechanical seal's active surface by means of cylindrically shaped dimples engraved circumferentially on the outside diameter of the mating ring. The working fluid is propylene glycol solution (70% in water by volume) and the flush rate is 107 cm 3 /s. A commercially available CFD code (FLUENT) is employed to numerically confirm the experimental measurements, and the numerical and experimental results are in agreement. Results of this study demonstrate the heat augmentation effectiveness of surface texture techniques on the mechanical seals.

[1]  M. Khonsari,et al.  Analysis of conjugate heat transfer and turbulent flow in mechanical seals , 2009 .

[2]  Boris Glezer,et al.  Local Heat Transfer and Flow Structure on and Above a Dimpled Surface in a Channel , 2001 .

[3]  J. E. Beard,et al.  An experimental-computational investigation of the heat transfer in mechanical face seals , 1991 .

[4]  M. Chyu,et al.  Computations of Flow and Heat Transfer in a Channel With Rows of Hemispherical Cavities , 1999 .

[5]  Michael M. Khonsari,et al.  Numerical Simulations of the Flow Field Around the Rings of Mechanical Seals , 2006 .

[6]  Minking K. Chyu,et al.  Concavity Enhanced Heat Transfer in an Internal Cooling Passage , 1997 .

[7]  M. Khonsari,et al.  Heat transfer correlations for laminar flows within a mechanical seal chamber , 2009 .

[8]  Frank P. Incropera,et al.  Fundamentals of Heat and Mass Transfer , 1981 .

[9]  Qiang Zhang,et al.  Thermal performance of dimpled surfaces in laminar flows , 2009 .

[10]  M. Khonsari,et al.  A generalized thermoelastic instability analysis , 2003, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[11]  A. O. Lebeck,et al.  Principles and Design of Mechanical Face Seals , 1991 .

[12]  S. A. Isaev,et al.  Numerical Simulation of Vortex Enhancement of Heat Transfer under Conditions of Turbulent Flow Past a Spherical Dimple on the Wall of a Narrow Channel , 2003 .

[13]  A. I. Leontiev,et al.  Turbulent flow friction and heat transfer characteristics for spherical cavities on a flat plate , 1993 .

[14]  Michael M. Khonsari,et al.  Heat transfer analysis in mechanical seals using fin theory , 2007 .

[15]  S. C. Lau,et al.  Turbulent Heat Transfer Measurements on a Wall With Concave and Cylindrical Dimples in a Square Channel , 2002 .