Thermal aging effects on mechanical and tribological performance of PEEK and short fiber reinforced PEEK composites

Abstract The effects of thermal aging on the properties of unfilled and random oriented short fiber reinforced PEEK and its composites have been studied. After the isothermal aging process, there is a remarkable decrease in degree of crystallinity but more organized crystallize structure achieved. As a result of transcrystalline layer formation, there was a considerable increase in the flexural modulus of materials. Thermal aging affects the impact properties of filled and unfilled PEEK dramatically. F max , E max and E  ·  F max results of both filled and unfilled aged PEEK and its composites are dramatically decreased. Thermal aging makes materials more brittle and there was a significant decrease in toughness. % Crystallinity is not the unique parameters to determine polymer’s performance. The orientation of crystals is another important parameter in microstructure and plays important role in mechanical and tribological properties of PEEK and its composites. There is a close relationship between thermal aging and microstructure. But there is not a linear relationship between microstructure and tribological properties. Microstructural changes after thermal aging serves developed mechanical properties. Increased mechanical properties results in improved tribological properties.

[1]  Susumu Nagai,et al.  Performance of plastic gear made of carbon fiber reinforced poly-ether-ether-ketone: Part 2 , 1999 .

[2]  Klaus Friedrich,et al.  On sliding friction and wear of PEEK and its composites , 1995 .

[3]  B. Bhushan.  Principles and Applications of Tribology , 1999 .

[4]  G. Springer,et al.  The Effects of Crystallinity on the Mechanical Properties of PEEK Polymer and Graphite Fiber Reinforced PEEK , 1987 .

[5]  H. Kilian,et al.  The thermoelastic behaviour of semicrystalline and of glassy poly(ether-ether-ketone) , 1994 .

[6]  B. Hsiao,et al.  Morphological Changes during Secondary Crystallization and Subsequent Melting in Poly(ether ether ketone) as Studied by Real Time Small Angle X-ray Scattering , 1996 .

[7]  M. Buggy,et al.  The effect of thermal ageing on carbon fibre-reinforced polyetheretherketone (PEEK) , 1994 .

[8]  J. Nairn,et al.  Interfacial toughness and its effect on compression strength in polycarbonate/carbon fiber composites , 1994 .

[9]  M. Buggy,et al.  The effect of thermal ageing on carbon fibre-reinforced polyetheretherketone (PEEK) , 1994, Journal of Materials Science.

[10]  B. Stuart.  Tribological studies of poly(ether ether ketone) blends , 1998 .

[11]  A. Wang,et al.  Carbon fiber reinforced polyether ether ketone composite as a bearing surface for total hip replacement , 1998 .

[12]  C. Migliaresi,et al.  Determining the role of interfacial transcrystallinity in composite materials by dynamic mechanical thermal analysis , 1995 .

[13]  A. Ankara,et al.  The effect of heat treatment on the properties of peek and APC2 , 1993 .

[14]  S. Ramachandra,et al.  The effect of controlled surface topographical features on the unlubricated transfer and wear of PEEK , 1997 .

[15]  C. Migliaresi,et al.  The influence of thermal history on the mechanical properties of poly(ether ether ketone) matrix composite materials , 1993 .

[16]  K. Friedrich,et al.  Evaluation of polymer composites for sliding and abrasive wear applications , 1988 .

[17]  G. Marom,et al.  Thermal treatment effects on the crystallinity and the mechanical behaviour of carbon fibre-poly(ether ether ketone) composites , 1994 .

[18]  H. Wagner,et al.  The mechanical role of the fibre/matrix transcrystalline interphase in carbon fibre reinforced J-polymer microcomposites , 1993 .

[19]  M. Furey,et al.  Tribological behavior of unidirectional graphite-epoxy and carbon-PEEK composites , 1993 .

[20]  P. J. Phillips,et al.  Melting behavior of high-temperature polymers , 1996 .