Compression deformation of a biaxial stitched glass fibre reinforcement: Visualisation and image analysis using X-ray micro-CT

Abstract The compression deformation response of glass fibre reinforcements is generally assumed to be non-linear elastic for the purposes of modelling. In some cases viscoelastic behaviour is also taken into account, while it is only more recently that permanent deformation is being considered. In a previous publication, the authors have showed that significant permanent deformation occurs, and is of comparable magnitude to elastic deformation. It is hypothesised here that permanent (and elastic) deformations in biaxial stitched fabric glass fibre reinforcement occur mainly by means of change of fibre bundle cross-sectional shape and size. Time-dependent deformation is thought to relate to fibre bundle displacement in the direction of compaction loading. Composite laminates were manufactured from a 820 g/m 2 biaxial stitched reinforcement material, using different processing parameters. Specimen pieces were cut from the laminates, and the deformation of fibre bundles in these specimens was studied employing X-ray micro-CT technology and image analysis software. The results demonstrate that fibre bundle cross-sections became thinner and elongated, more so under repeated compaction. Fibre bundles were also less undulated in the direction of loading with repeated compaction.

[1]  Joël Bréard,et al.  Analysis of dynamic flows through porous media. Part II: Deformation of a double-scale fibrous reinforcement , 2003 .

[2]  Piaras Kelly,et al.  Viscoelastic response of dry and wet fibrous materials during infusion processes , 2006 .

[3]  François Robitaille,et al.  Compaction of textile reinforcements for composites manufacturing. III: Reorganization of the fiber network , 1999 .

[4]  D. Bhattacharyya,et al.  Exploring the Non-Elastic Compression Deformation of Dry Glass Fibre Reinforcements , 2007 .

[5]  Constantina Lekakou,et al.  Compression and microstructure of fibre plain woven cloths in the processing of polymer composites , 1998 .

[6]  Constantina Lekakou,et al.  Compressibility and flow permeability of two-dimensional woven reinforcements in the processing of composites , 1996 .

[7]  C. Binetruy,et al.  Unidirectional compression of fibre reinforcements. Part 1: A non-linear elastic-plastic behaviour , 2007 .

[8]  L. Ye,et al.  A micromechanical compaction model for woven fabric preforms. Part I: Single layer , 2006 .

[9]  Ignace Verpoest,et al.  Micro-CT characterization of variability in 3D textile architecture , 2005 .

[10]  J. I. Dunlop.  On the Compression Characteristics of Fibre Masses , 1983 .

[11]  Tsu-Wei Chou,et al.  Experimental and theoretical studies of fabric compaction behavior in resin transfer molding , 2001 .

[12]  Z. Cai.  A Nonlinear Viscoelastic Model for Describing the Deformation Behavior of Braided Fiber Seals , 1995 .

[13]  Paolo Ermanni,et al.  Micro-computed tomography determination of glass fibre reinforced polymer meso structure , 2006 .

[14]  D. Bhattacharyya,et al.  An Experimental Investigation of Non-Elastic Deformation of Fibrous Reinforcements in Composites Manufacturing , 2006 .

[15]  Tsu-Wei Chou,et al.  A nonlinear compaction model for fibrous preforms , 2001 .

[16]  S. J. Wineman,et al.  Consolidation Experiments for Laminate Composites , 1987 .

[17]  M. Wevers,et al.  Using textile topography to analyze X‐ray CT data of composite microstructure , 2001 .

[18]  Vistasp M. Karbhari,et al.  Notes on the Modeling of Preform Compaction: I -Micromechanics at the Fiber Bundle Level , 1996 .

[19]  Steven Nutt,et al.  Direct observation and measurement of fiber architecture in short fiber-polymer composite foam through micro-CT imaging , 2004 .

[20]  K. Jayaraman,et al.  Consolidation and relaxation behavior of continuous strand random glass mats with thermoplastic binders , 1996 .

[21]  C. L. Tucker,et al.  Numerical simulation of injection/compression liquid composite molding. Part 2: preform compression , 2001 .