Fabrication and characterisation of PCL and PCL/PLA scaffolds for tissue engineering

Purpose – The main purpose of this research work is to study the effect of poly lactic acid (PLA) addition into poly (e-caprolactone) (PCL) matrices, as well the influence of the mixing process on the morphological, thermal, chemical, mechanical and biological performance of the 3D constructs produced with a novel biomanufacturing device (BioCell Printing). Design/methodology/approach – Two mixing processes are used to prepare PCL/PLA blends, namely melt blending and solvent casting. PCL and PCL/PLA scaffolds are produced via BioCell Printing using a 300-μm nozzle, 0/90° lay down pattern and 350-μm pore size. Several techniques such as scanning electron microscopy (SEM), simultaneous thermal analyzer (STA), nuclear magnetic resonance (NMR), static compression analysis and Alamar BlueTM are used to evaluate scaffold's morphological, thermal, chemical, mechanical and biological properties. Findings – Results show that the addition of PLA to PCL scaffolds strongly improves the biomechanical performance of th...

[1]  P. Bártolo,et al.  Effect of process parameters on the morphological and mechanical properties of 3D Bioextruded poly(ε‐caprolactone) scaffolds , 2012 .

[2]  T. Maekawa,et al.  POLYMERIC SCAFFOLDS IN TISSUE ENGINEERING APPLICATION: A REVIEW , 2011 .

[3]  Dennis E Discher,et al.  Self-porating polymersomes of PEG-PLA and PEG-PCL: hydrolysis-triggered controlled release vesicles. , 2004, Journal of controlled release : official journal of the Controlled Release Society.

[4]  C. Laurencin,et al.  Biodegradable polymers as biomaterials , 2007 .

[5]  D. Hutmacher,et al.  Scaffolds in tissue engineering bone and cartilage. , 2000, Biomaterials.

[6]  L. Ambrosio,et al.  Dynamic Co-Seeding of Osteoblast and Endothelial Cells on 3D Polycaprolactone Scaffolds for Enhanced Bone Tissue Engineering , 2008 .

[7]  I. Zein,et al.  Fused deposition modeling of novel scaffold architectures for tissue engineering applications. , 2002, Biomaterials.

[8]  C. Choong,et al.  Polycaprolactone scaffolds for bone tissue engineering: Effects of a calcium phosphate coating layer on osteogenic cells , 2004 .

[9]  J M Polak,et al.  Scaffolds and biomaterials for tissue engineering: a review of clinical applications. , 2003, Clinical otolaryngology and allied sciences.

[10]  J. Sarasua,et al.  Crystallization, morphology, and mechanical behavior of polylactide/poly(ε‐caprolactone) blends , 2006 .

[11]  J F Orr,et al.  Processing, annealing and sterilisation of poly-L-lactide. , 2004, Biomaterials.

[12]  P. Bártolo,et al.  Additive manufacturing of tissues and organs , 2012 .

[13]  C. G. Pitt.  Poly-ε-caprolactone and its copolymers , 1990 .

[14]  Krzysztof Moraczewski,et al.  Characterisation of multi-extruded poly(lactic acid) , 2009 .

[15]  V. B. Konkimalla,et al.  Poly-є-caprolactone based formulations for drug delivery and tissue engineering: A review. , 2012, Journal of controlled release : official journal of the Controlled Release Society.

[16]  Donald Garlotta,et al.  A Literature Review of Poly(Lactic Acid) , 2001 .

[17]  Chi-Hui Tsou,et al.  Study on the Crystallization, Miscibility, Morphology, Properties of Poly(lactic acid)/Poly(ϵ-caprolactone) Blends , 2009 .

[18]  Joaquim Ciurana,et al.  BioCell Printing: Integrated automated assembly system for tissue engineering constructs , 2011 .

[19]  Youngmee Jung,et al.  Application of an elastic biodegradable poly(L-lactide-co-ε-caprolactone) scaffold for cartilage tissue regeneration , 2008, Journal of biomaterials science. Polymer edition.

[20]  F. Moatamed,et al.  The intracellular degradation of poly(ε-caprolactone) , 1985 .

[21]  Suming Li,et al.  Enzymatic degradation of block copolymers prepared from epsilon-caprolactone and poly(ethylene glycol). , 2002, Biomacromolecules.

[22]  D. Hutmacher,et al.  The return of a forgotten polymer : Polycaprolactone in the 21st century , 2009 .

[23]  Suming Li,et al.  Biodegradable polymers : polyesters , 1999 .

[24]  Sandra Downes,et al.  Physicochemical characterisation of novel ultra-thin biodegradable scaffolds for peripheral nerve repair , 2009, Journal of materials science. Materials in medicine.

[25]  N. Manolova,et al.  NMR Analysis of Low Molecular Weight Poly(lactic acid)s , 1996 .

[26]  F. Kurtis Kasper,et al.  Polymer scaffold fabrication , 2020, Principles of Tissue Engineering.

[27]  A. Atala.  Engineering tissues, organs and cells , 2007, Journal of tissue engineering and regenerative medicine.

[28]  Toshihiro Akaike,et al.  A novel degradable polycaprolactone networks for tissue engineering. , 2003, Biomaterials.

[29]  I Zein,et al.  Mechanical properties and cell cultural response of polycaprolactone scaffolds designed and fabricated via fused deposition modeling. , 2001, Journal of biomedical materials research.