Thermohydrologic behavior at an underground nuclear waste repository

[1] We present a multiscale model that simulates coupled thermal and hydrological behavior driven by radioactive decay heat from a potential nuclear waste repository at Yucca Mountain, Nevada. We use this model to evaluate repository performance for different designs with respect to major thermal design goals (e.g., keeping waste packages dry). A locally boiling or globally boiling design uses rock dry out to create dry (low relative humidity (RH)) conditions around waste packages for a long period of time. A subboiling design eliminates boiling in the host rock (possibly reducing uncertainty) but is less effective at maintaining dry conditions. The addition of backfill increases the duration of RH reduction significantly without added boiling in the host rock but at the cost of higher waste package temperatures. The interaction between engineering design variables and natural system factors that affect thermohydrologic behavior is highly nonlinear. As a consequence, designs that differ by seemingly small details can result in markedly different thermohydrologic behavior and consequently repository performance, whereas with regards to other details, large differences may have little or no effect.

[1]  Jens T. Birkholzer,et al.  Predictions and observations of the thermal-hydrological conditions in the Single Heater Test , 1999 .

[2]  K. Pruess.  On thermohydrologic conditions near high-level nuclear wastes emplaced in partially saturated fractured tuff 1. Simulation studied with explicit consideration of fractures 2. Effective continuum approximation , 1990 .

[3]  Yu-Shu Wu,et al.  Thermal loading studies using the Yucca Mountain unsaturated zone model , 1999 .

[4]  G. Bodvarsson,et al.  Overview of scientific investigations at Yucca Mountain—the potential repository for high-level nuclear waste , 1999 .

[5]  J. T. Birkholzer,et al.  Modeling the thermal‐hydrologic processes in a large‐scale underground heater test in partially saturated fractured tuff , 2000 .

[6]  Gudmundur S. Bodvarsson,et al.  Calibrating hydrogeologic parameters for the 3-D site-scale unsaturated zone model of Yucca Mountain, Nevada , 1999 .

[7]  W. E. Wilson,et al.  Conceptual hydrologic model of flow in the unsaturated zone, Yucca Mountain, Nevada , 1984 .

[8]  Y. Mualem.  A New Model for Predicting the Hydraulic Conductivity , 1976 .

[9]  Gudmundur S. Bodvarsson,et al.  Evolution of the conceptual model of unsaturated zone hydrology at Yucca Mountain, Nevada , 2001 .

[10]  J. Nitao,et al.  Repository-Heat-Driven Hydrothermal Flow at Yucca Mountain, Part I: Modeling and Analysis , 1993 .

[11]  Y. Tsang,et al.  On thermohydrologic conditions near high‐level nuclear wastes emplaced in partially saturated fractured tuff: 1. Simulation studies with explicit consideration of fracture effects , 1990 .

[12]  Y. Tsang,et al.  On thermohydrologic conditions near high-level nuclear wastes emplaced in partially saturated fractured tuff. 2. Effective continuum approximation , 1990 .

[13]  Localized dryout: An approach for managing the thermal hydrologi-cal effects of decay heat at Yucca Mountain , 1995 .

[14]  J. J. Nitao,et al.  The impact of buoyant gas-phase flow and heterogeneity on thermo-hydrological behavior at Yucca Mountain , 1994 .

[15]  Christine Doughty.  Investigation of conceptual and numerical approaches for evaluating moisture, gas, chemical, and heat transport in fractured unsaturated rock , 1999 .

[16]  Van Genuchten,et al.  A closed-form equation for predicting the hydraulic conductivity of unsaturated soils , 1980 .

[17]  Gudmundur S. Bodvarsson,et al.  A site-scale model for fluid and heat flow in the unsaturated zone of Yucca Mountain, Nevada , 1999 .

[18]  Gudmundur S. Bodvarsson,et al.  An active fracture model for unsaturated flow and transport in fractured rocks , 1998 .