Origin of the Bauschinger effect in a polycrystalline material

[1]  A. Mamun.  Origin of creep-fatigue back stress and its effect on deformation and damage , 2017 .

[2]  D. Smith,et al.  On the evaluation of the Bauschinger effect in an austenitic stainless steel—The role of multi-scale residual stresses , 2016 .

[3]  Shu Yan Zhang,et al.  Role of the misfit stress between grains in the Bauschinger effect for a polycrystalline material , 2015 .

[4]  R. Skelton.  Bauschinger yield in the range 400–1025°C during cyclic deformation of high temperature alloys , 2013 .

[5]  Ahmed A. Saleh,et al.  On the evolution and modelling of lattice strains during the cyclic loading of TWIP steel , 2013 .

[6]  B. Clausen,et al.  A slip system-based kinematic hardening model application to in situ neutron diffraction of cyclic deformation of austenitic stainless steel , 2012 .

[7]  A. Setoodeh,et al.  Nanoscale simulations of Bauschinger effects on a nickel nanowire , 2008 .

[8]  Frédéric Barlat,et al.  Work-hardening model for polycrystalline metals under strain reversal at large strains , 2007 .

[9]  Mark R. Daymond,et al.  ENGIN-X: a third-generation neutron strain scanner , 2006 .

[10]  M. Daymond,et al.  Elastoplastic deformation of 316 stainless steel under tensile loading at elevated temperatures , 2006 .

[11]  Luís Menezes,et al.  Modelling of anisotropic work-hardening behaviour of metallic materials subjected to strain-path changes , 2005 .

[12]  F. Barlat,et al.  A comparison of the mechanical behaviour of an AA1050 and a low carbon steel deformed upon strain reversal , 2005 .

[13]  P. Withers,et al.  Interphase and intergranular stress generation in carbon steels , 2004 .

[14]  S. Bate,et al.  Use of conventional stress-strain data to develop parameters for an advanced constitutive model , 2002 .

[15]  B. Bacroix,et al.  Experimental observation of microstructure evolution under strain-path changes in low-carbon IF steel , 2001 .

[16]  Bart Peeters,et al.  Work-hardening/softening behaviour of b.c.c. polycrystals during changing strain paths: I. An integrated model based on substructure and texture evolution, and its prediction of the stress–strain behaviour of an IF steel during two-stage strain paths , 2001 .

[17]  C. Tomé,et al.  Measured and predicted intergranular strains in textured austenitic steel , 2000 .

[18]  M. E. Kassner,et al.  Microstructure and mechanisms of cyclic deformation in aluminum single crystals at 77 K: Part II. Edge dislocation dipole heights , 1999 .

[19]  E. Rauch.  The stresses and work hardening rates of mild steel with different dislocation patterns , 1997 .

[20]  M. E. Kassner,et al.  Microstructure and mechanisms of cyclic deformation of aluminum single crystals at 77 K , 1997 .

[21]  S. Thuillier,et al.  Development of microbands in mild steel during cross loading , 1994 .

[22]  D. Wilson,et al.  Influences of cell walls and grain boundaries on transient responses of an if steel to changes in strain path , 1994 .

[23]  P. Haasen,et al.  A new mechanism of work hardening in the late stages of large strain plastic flow in F.C.C. and diamond cubic crystals , 1993 .

[24]  H. Margolin,et al.  The Bauschinger effect and the stresses in a strained single crystal , 1992 .

[25]  E. F. Rauch,et al.  Dislocation substructures in mild steel deformed in simple shear , 1989 .

[26]  F. Nabarro.  Work hardening and dynamical recovery of F.C.C. metals in multiple glide , 1989 .

[27]  E. Aernoudt,et al.  Directional strain softening in ferritic steel , 1987 .

[28]  U. F. Kocks,et al.  Forward and reverse rearrangements of dislocations in tangled walls , 1986 .

[29]  M. E. Kassner,et al.  Some trends observed in the elevated-temperature kinematic and isotropic hardening of type 304 stainless steel , 1985 .

[30]  H. Mughrabi,et al.  X-ray line-broadening study of the dislocation cell structure in deformed [001]-orientated copper single crystals , 1984 .

[31]  H. Mughrabi,et al.  Dislocation wall and cell structures and long-range internal stresses in deformed metal crystals , 1983 .

[32]  G. Krauss,et al.  The Bauschinger effect in a nitrogen-strengthened austenitic stainless steel , 1983 .

[33]  U. F. Kocks,et al.  On the origin of cell walls and of lattice misorientations during deformation , 1980 .

[34]  M. James,et al.  Reversible strain in cyclic plastic deformation , 1978 .

[35]  R. Pelloux,et al.  The Bauschinger effect in precipitation strengthened aluminum alloys , 1976 .

[36]  S. Karashima,et al.  Deformation behaviour and dislocation structures upon stress reversal in polycrystalline aluminium , 1975 .

[37]  W. Brown,et al.  Observations on Bauschinger Effect in Copper and Brass , 1951 .

[38]  W. Wood,et al.  Internal Stresses in Metals , 1948, Nature.

[39]  A. Götte,et al.  Metall , 1897 .