Canola meal moisture-resistant fuel pellets: study on the effects of process variables and additives on the pellet quality and compression characteristics.

Abstract This study focuses on pelletization of waste canola meal biomass to increase the bulk density, thereby reducing the transportation and storage costs, thus provide better material feeding in gasification reactors with less dust formation. The effects of feed constituents of canola meal such as protein, fiber, fat, lignin and feed moisture content as well as added binder, lubricant and densification process parameters on the strength and durability of the densified product are investigated. The increased durability (99%) of canola meal pellets was a result of added binder (5 wt%) and the inherent protein (40 wt%) and lignin (12 wt%) content in the feed. From the compression data at different temperature and pressure, Kawakita and Ludde model (1971) was developed to classify the feed material into groups. The R2 value ≥0.999 showed good model fit. It was found that at temperature >70 °C, the particle undergoes rearrangement followed by fragmentation and particle plastic deformation during the compression process. The effects of coating agent on pellet durability, hardness and moisture uptake were studied to produce moisture-resistant pellets. Finally, the pellets were gasified in a fixed bed reactor using different gasifying agents such as steam, oxygen (O2) and carbon dioxide (CO2) and their effects were assessed. Carbon dioxide was found to give maximum carbon efficiency (CE) up to 82.7% and 50.7 MJ/m3 LHV of gas at a temperature of 750 °C and equivalence ratio (ER) of 0.4., whereas O2 gave 66.5% of CE with 44.7 MJ/m3 LHV of gas at 650 °C and 0.4 ER and steam produced gas with LHV 40.8 MJ/m3 with CE 27.4% at 650 °C and 0.2 ER. Thus, by producing moisture-resistant canola meal pellets with reasonable fuel characteristics, pelletization of canola meal provides a promising alternative for the utilization of canola meal waste as an alternative source of renewable energy.

[1]  R. .. Morey,et al.  Densification Characteristics of Corn Stover and Switchgrass , 2009 .

[2]  Lope G. Tabil,et al.  Effect of microwave–chemical pre-treatment on compression characteristics of biomass grinds , 2011 .

[3]  Yadong Li,et al.  High-pressure densification of wood residues to form an upgraded fuel , 2000 .

[4]  S. Sokhansanj,et al.  An Overview of Compaction of Biomass Grinds , 2003 .

[5]  Ken Welch,et al.  On the physical interpretation of the Kawakita and Adams parameters derived from confined compression of granular solids , 2008 .

[6]  A.F.B. van der Poel,et al.  Physical quality of pelleted animal feed. 2. contribution of processes and its conditions , 1997 .

[7]  A.F.B. van der Poel,et al.  Physical quality of pelleted animal feed 1. Criteria for pellet quality , 1996 .

[8]  J. Bowyer,et al.  Agricultural residues: An exciting bio-based raw material for the global panels industry , 2001 .

[9]  J. Finnan,et al.  Physical and chemical properties of pellets from energy crops and cereal straws , 2012 .

[10]  J. Nordström,et al.  A particle rearrangement index based on the Kawakita powder compression equation. , 2009, Journal of pharmaceutical sciences.

[11]  P. J. Denny.  Compaction equations: a comparison of the Heckel and Kawakita equations , 2002 .

[12]  Robert Samuelsson,et al.  Effects of moisture content, torrefaction temperature, and die temperature in pilot scale pelletizing of torrefied Norway spruce , 2013 .

[13]  Changkook Ryu,et al.  Effect of process parameters on pelletisation of herbaceous crops , 2009 .

[14]  Clara Serrano,et al.  Effect of moisture content, particle size and pine addition on quality parameters of barley straw pellets , 2011 .

[15]  Kimio Kawakita,et al.  Some considerations on powder compression equations , 1971 .

[16]  Mohamad I. Al-Widyan,et al.  STRESS–DENSITY RELATIONSHIP AND ENERGY REQUIREMENT OF COMPRESSED OLIVE CAKE , 2001 .

[17]  W. Jones,et al.  Fundamental principles of powder metallurgy , 1960 .

[18]  A. Dalai,et al.  Catalytic Gasification of Sawdust Derived from Various Biomass , 2003 .

[19]  M. Thomas.  Physical quality of pelleted feed : a feed model study , 1998 .

[20]  Shahab Sokhansanj,et al.  Production and distribution of cereal straw on the canadian prairies , 2006 .

[21]  S. Sokhansanj,et al.  Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses , 2006 .

[22]  Phani Adapa,et al.  Pelleting characteristics of selected biomass with and without steam explosion pretreatment , 2010 .

[23]  A. R. Cooper,et al.  Compaction Behavior of Several Ceramic Powders , 1962 .

[24]  X. Bi,et al.  Torrefaction and densification of different species of softwood residues , 2013 .

[25]  J. Nordström,et al.  A statistical approach to evaluate the potential use of compression parameters for classification of pharmaceutical powder materials. , 2010, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[26]  P. D. Jensen,et al.  Comparative study of durability test methods for pellets and briquettes , 2006 .

[27]  J. Nordström,et al.  A protocol for the classification of powder compression characteristics. , 2012, European journal of pharmaceutics and biopharmaceutics : official journal of Arbeitsgemeinschaft fur Pharmazeutische Verfahrenstechnik e.V.

[28]  K. Behnke,et al.  Effect of composition of feed model systems on pellet quality: a mixture experimental approach. II , 2005 .

[29]  Phani Adapa,et al.  Factors affecting the quality of biomass pellet for biofuel and energy analysis of pelleting process , 2013 .

[30]  Christopher T. Wright,et al.  A Technical Review on Biomass Processing: Densification, Preprocessing, Modeling and Optimization , 2010 .

[31]  G. Schoenau,et al.  Compression Characteristics of Selected Ground Agricultural Biomass , 2009 .

[32]  Sudhagar Mani,et al.  Evaluation of compaction equations applied to four biomass species , 2004 .

[33]  E. A. Arinze,et al.  Customized and Value-added High Quality Alfalfa Products: A New Concept , 2007 .

[34]  D. L. Durham,et al.  Effects of moisture change on the physical and thermal properties of sericea lespedeza pellets , 2010 .

[35]  A. Dalai,et al.  Slow Pyrolysis of Deoiled Canola Meal: Product Yields and Characterization , 2013 .

[36]  Timothy G. Rials,et al.  Relaxation behaviour of the amorphous components of wood , 1987 .

[37]  Jesper Ahrenfeldt,et al.  Fuel Pellets from Wheat Straw: The Effect of Lignin Glass Transition and Surface Waxes on Pelletizing Properties , 2012, BioEnergy Research.

[38]  B. Watkins,et al.  Effect of ingredients and processing parameters on pellet quality. , 1999, Poultry Science.

[39]  A. Dalai,et al.  Gasification of Canola Meal and Factors Affecting Gasification Process , 2014, BioEnergy Research.

[40]  A.F.B. van der Poel,et al.  Physical quality of pelleted animal feed 3. Contribution of feedstuff components , 1998 .

[41]  A. Dalai,et al.  Gasification of refuse derived fuel in a fixed bed reactor for syngas production. , 2009, Waste management.

[42]  Kimio Kawakita,et al.  An Empirical Equation of State for Powder Compression , 1965 .