Job enlargement and mechanical exposure variability in cyclic assembly work

Cyclic assembly work is known to imply a high risk for musculoskeletal disorders. To have operators rotate between work tasks is believed to be one way of decreasing this risk, since it is expected to increase variation in mechanical and psychological exposures (physical and mental loads). This assumption was investigated by assessing mechanical exposure variability in three assembly tasks in an electronics assembly plant, each on a separate workstation, as well as in a ‘job enlargement’ scenario combining all three stations. Five experienced operators worked for 1 h on each station. Data on upper trapezius and forearm extensor muscle activity were obtained by means of electromyography (EMG), and working postures of the head and upper arms were assessed by inclinometry. The cycle-to-cycle variance of parameters representing the three exposure dimensions: level, frequency and duration was estimated using ANOVA algorithms for each workstation separately as well as for a balanced combination of all three. For a particular station, the variability of trapezius EMG activity levels relative to the mean was higher than for extensor EMG: between-cycles coefficients of variation (CV) about 0.15 and 0.10, respectively. A similar relationship between CV applied to the parameter describing frequency of EMG activity. Except for head inclination levels, the between-cycles CV was larger for posture parameters than for EMG. The between-cycles variance increased up to six fold in the job enlargement scenario, as compared to working at only one station. The difference in mean exposure between workstations was larger for trapezius EMG parameters than for forearm extensor EMG and postures, and hence the effect of job enlargement on exposure variability was more pronounced for the trapezius. For some stations, job enlargement even implied less cycle-to-cycle variability in forearm extensor EMG parameters than working at that station only. Whether the changes in exposure variability associated with job enlargement were sufficient to imply a decreased risk for musculoskeletal disorders is not known.

[1]  R Kadefors,et al.  The effect of light manual precision work on shoulder muscles--an EMG analysis. , 1998, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[2]  P. Neumann,et al.  Assessment of physical work load in epidemiologic studies: common measurement metrics for exposure assessment. , 1997, Ergonomics.

[3]  J P Bonde,et al.  Physical exposure assessment in monotonous repetitive work--the PRIM study. , 2001, Scandinavian journal of work, environment & health.

[4]  Ilkka Kuorinka,et al.  Tools and means of implementing participatory ergonomics , 1997 .

[5]  Svend Erik Mathiassen,et al.  Statistical power and measurement allocation in ergonomic intervention studies assessing upper trapezius EMG amplitude. A case study of assembly work. , 2002, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[6]  Clas-Håkan Nygård,et al.  Physical work load, physical capacity and strain among elderly female aides in home-care service , 2004, European Journal of Applied Physiology and Occupational Physiology.

[7]  M Christmansson,et al.  Task design, psycho-social work climate and upper extremity pain disorders--effects of an organisational redesign on manual repetitive assembly jobs. , 1999, Applied ergonomics.

[8]  Svend Erik Mathiassen,et al.  Variability in mechanical exposure within and between individuals performing a highly constrained industrial work task , 2003, Ergonomics.

[9]  G K Lemasters,et al.  Statistical methods for describing occupational exposure measurements. , 1985, American Industrial Hygiene Association journal.

[10]  Nils Fallentin,et al.  Criteria for classification of posture in repetitive work by observation methods: A review , 1997 .

[11]  Pascal Madeleine,et al.  Shoulder muscle co-ordination during chronic and acute experimental neck-shoulder pain. An occupational pain study , 1999, European Journal of Applied Physiology and Occupational Physiology.

[12]  S. Skerfving,et al.  Quantifying work load in neck, shoulders and wrists in female dentists , 1997, International archives of occupational and environmental health.

[13]  J.-J.J. Chen,et al.  Temporal feature extraction and clustering analysis of electromyographic linear envelopes in gait studies , 1990, IEEE Transactions on Biomedical Engineering.

[14]  K Ohlsson,et al.  Disorders of the neck and upper limbs in women in the fish processing industry. , 1994, Occupational and environmental medicine.

[15]  Leif Sandsjö,et al.  Surface EMG and psychophysiological stress reactions in women during repetitive work , 2000, European Journal of Applied Physiology.

[16]  A Burdorf,et al.  Reducing random measurement error in assessing postural load on the back in epidemiologic surveys. , 1995, Scandinavian journal of work, environment & health.

[17]  Svend Erik Mathiassen,et al.  Interactive effect of ergonomics and production engineering on shoulder-neck exposure — A case study of assembly work in China and Sweden , 1997 .

[18]  Å. Kilbom,et al.  Repetitive work of the upper extremity: Part II — The scientific basis (knowledge base) for the guide , 1994 .

[19]  Jan Ekholm,et al.  Reproducibility of work movements with carpenters' hand tools , 1989 .

[20]  A M Genaidy,et al.  Active microbreak effects on musculoskeletal comfort ratings in meatpacking plants. , 1995, Ergonomics.

[21]  Y. Roquelaure,et al.  Occupational and personal risk factors for carpal tunnel syndrome in industrial workers. , 1997, Scandinavian journal of work, environment & health.

[22]  Anne Punakallio,et al.  Participatory ergonomics for reducing load and strain in home care work , 1998 .

[23]  H. Christensen,et al.  Muscle activity and fatigue in the shoulder muscles of assembly-plant employees. , 1986, Scandinavian journal of work, environment & health.

[24]  D Colombini,et al.  An observational method for classifying exposure to repetitive movements of the upper limbs. , 1998, Ergonomics.

[25]  N. Fallentin,et al.  Evaluation of Physical Workload Standards/Guidelines from a Nordic Perspective , 2000, Scandinavian journal of work, environment & health.

[26]  A J van der Beek,et al.  Assessment of mechanical exposure in ergonomic epidemiology. , 1998, Occupational and environmental medicine.

[27]  Karen Søgaard,et al.  The importance of the work/rest pattern as a risk factor in repetitive monotonous work. , 2000 .

[28]  S E Mathiassen,et al.  Physiological comparison of three interventions in light assembly work: reduced work pace, increased break allowance and shortened working days , 1996, International archives of occupational and environmental health.

[29]  S E Mathiassen,et al.  Assessment of physical work load in epidemiologic studies: concepts, issues and operational considerations. , 1994, Ergonomics.

[30]  H C Kemper,et al.  Job rotation as a factor in reducing physical workload at a refuse collecting department. , 1999, Ergonomics.

[31]  R Wells,et al.  Upper limb musculoskeletal disorders in highly repetitive industries: precise anatomical physical findings. , 1995, Ergonomics.

[32]  U. Hinnen,et al.  Design of check-out systems including laser scanners for sitting work posture. , 1992, Scandinavian journal of work, environment & health.

[33]  P. Buckle,et al.  The nature of work-related neck and upper limb musculoskeletal disorders. , 2002, Applied ergonomics.

[34]  Annika Åström,et al.  Load pattern and pressure pain threshold in the upper trapezius muscle and psychosocial factors in medical secretaries with and without shoulder/neck disorders , 1997, International archives of occupational and environmental health.

[35]  Svend Erik Mathiassen,et al.  A case study evaluating the ergonomic and productivity impacts of partial automation strategies in the electronics industry , 2002 .

[36]  R Kadefors,et al.  A Swedish industrial research program 'Co-operative for Optimization of Industrial Production Systems Regarding Productivity and Ergonomics' (COPE). , 1999, American journal of industrial medicine.

[37]  G M Hägg,et al.  Forearm muscular load and wrist angle among automobile assembly line workers in relation to symptoms. , 1997, Applied ergonomics.

[38]  P. Herberts,et al.  Voluntary redistribution of muscle activity in human shoulder muscles. , 1995, Ergonomics.

[39]  R. H. Westgaard,et al.  Individual and work-related risk factors associated with symptoms of musculoskeletal complaints , 1993, International archives of occupational and environmental health.

[40]  A Kilbom,et al.  Work technique and its consequences for musculoskeletal disorders. , 1987, Ergonomics.

[41]  R H Westgaard,et al.  Pattern of muscle activity during stereotyped work and its relation to muscle pain , 1990, International archives of occupational and environmental health.

[42]  Göran M Hägg,et al.  The impact on musculoskeletal disorders of changing physical and psychosocial work environment conditions in the automobile industry , 2001 .

[43]  K Ohlsson,et al.  Interindividual variation of physical load in a work task. , 1999, Scandinavian journal of work, environment & health.

[44]  E. Asmussen,et al.  A central nervous component in local muscular fatigue , 1978, European Journal of Applied Physiology and Occupational Physiology.

[45]  S. Konz Work/rest: Part II – The scientific basis (knowledge base) for the guide1 , 2000 .

[46]  G-A Hansson,et al.  Modular data logger system for physical workload measurements , 2003, Ergonomics.

[47]  B Jonsson,et al.  Electromyographic studies of job rotation. , 1988, Scandinavian journal of work, environment & health.

[48]  G M Hägg,et al.  Normalization of surface EMG amplitude from the upper trapezius muscle in ergonomic studies - A review. , 1995, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[49]  P Asterland,et al.  A method for evaluation of manual work using synchronised video recordings and physiological measurements. , 2002, Applied ergonomics.

[50]  S E Mathiassen,et al.  Quantifying variation in physical load using exposure-vs-time data. , 1991, Ergonomics.

[51]  Etienne Grandjean,et al.  Fitting the Task to the Man: A Textbook of Occupational Ergonomics , 1988 .

[52]  J Winkel,et al.  Ergonomic effects of a management-based rationalization in assembly work - a case study. , 1996, Applied ergonomics.

[53]  M L Lin,et al.  An analytical method for characterizing repetitive motion and postural stress using spectral analysis. , 1993, Ergonomics.

[54]  Tomas Engström,et al.  Data collection and analysis of manual work using video recording and personal computer techniques , 1997 .

[55]  D. Winter,et al.  EMG profiles during normal human walking: stride-to-stride and inter-subject variability. , 1987, Electroencephalography and clinical neurophysiology.

[56]  L Finsen,et al.  Upper trapezius muscle activity patterns during repetitive manual material handling and work with with a computer mouse. , 1999, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[57]  Svend Erik Mathiassen,et al.  Efficient one-day sampling of mechanical job exposure data--a study based on upper trapezius activity in cleaners and office workers. , 2003, AIHA journal : a journal for the science of occupational and environmental health and safety.

[58]  S. Mathiassen,et al.  Normalizing upper trapezius EMG amplitude: Comparison of different procedures. , 1995, Journal of electromyography and kinesiology : official journal of the International Society of Electrophysiological Kinesiology.

[59]  G. Hansson,et al.  Validity and reliability of triaxial accelerometers for inclinometry in posture analysis , 2001, Medical and Biological Engineering and Computing.

[60]  J. Sluiter,et al.  Criteria document for evaluating the work-relatedness of upper-extremity musculoskeletal disorders. , 2001, Scandinavian journal of work, environment & health.