论文信息 - Low-Temperature Processed Anode for Solid Oxide Fuel Cells

Low-Temperature Processed Anode for Solid Oxide Fuel Cells

~YSZ! composite was prepared by depositing a 1-50mm thick coating of YSZ particles from acolloidal suspension ~initial YSZ particle size ,100 nm! onto a sapphire substrate followed by impregnation by Ni polymerprecursors into the coating and annealing at 800°C. The electrical conductivity at 700°C of the composite Ni-YSZ was 0.1 S cm

[1] Toshio Suzuki,et al. Defect and Mixed Conductivity in Nanocrystalline Doped Cerium Oxide , 2002 .

[2] B. Steele,et al. Material science and engineering: The enabling technology for the commercialisation of fuel cell systems , 2001 .

[3] B. Steele. Behaviour of porous cathodes in high temperature fuel cells , 1997 .

[4] Piotr Jasinski,et al. Low-Temperature Processing of Thin-Film Electrolyte for Electrochemical Devices , 2004 .

[5] 高橋武彦,et al. Science and technology of ceramic fuel cells , 1995 .

[6] L. A. Chick,et al. Diffusion Limitations in the Porous Anodes of SOFCs , 2003 .

[7] B. Steele. Survey of materials selection for ceramic fuel cells II. Cathodes and anodes , 1996 .

[8] Raymond J. Gorte,et al. Tape Cast Solid-Oxide Fuel Cells for the Direct Oxidation of Hydrocarbons , 2001 .