Effect of Pulsed Laser Ablation and Continuous Laser Heating on the Adhesion and Cohesion of Cold Sprayed Ti-6Al-4V Coatings

[1]  J. Legoux,et al.  Gas-Substrate Heat Exchange During Cold-Gas Dynamic Spraying , 2013, Journal of Thermal Spray Technology.

[2]  J. Legoux,et al.  The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats , 2012, Journal of Thermal Spray Technology.

[3]  J. Legoux,et al.  Powder Processing and Coating Heat Treatment on Cold Sprayed Ti-6Al-4V Alloy , 2012 .

[4]  J. Legoux,et al.  Mechanical behavior of Ti cold spray coatings determined by a multi-scale indentation method , 2011 .

[5]  Martin Sparkes,et al.  High speed titanium coatings by supersonic laser deposition , 2011 .

[6]  Laurent Berthe,et al.  State-of-the-art laser adhesion test (LASAT) , 2011 .

[7]  H. Richter,et al.  On Parameter Selection in Cold Spraying , 2011 .

[8]  J. Legoux,et al.  Mechanical Property Mapping of Cold Sprayed Ti Splats and Coatings , 2011 .

[9]  Jean-Pierre Monchalin,et al.  Adhesive bond testing of carbon–epoxy composites by laser shockwave , 2011 .

[10]  H. Liao,et al.  Ablation laser and heating laser combined to cold spraying , 2010 .

[11]  J. Legoux,et al.  Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings , 2010, International Thermal Spray Conference.

[12]  C. Moreau,et al.  Cold-Spraying Coupled to Nano-Pulsed Nd-YaG Laser Surface Pre-treatment , 2010 .

[13]  J. Legoux,et al.  Cold Spray Characteristics of Commercially Pure Ti and Ti-6Al-4V , 2010 .

[14]  W. Ludwig,et al.  Lasers and Thermal Spray , 2010 .

[15]  J. Legoux,et al.  Dynamic recrystallization in the particle/particle interfacial region of cold-sprayed nickel coating: Electron backscatter diffraction characterization , 2009 .

[16]  Thomas Klassen,et al.  From Particle Acceleration to Impact and Bonding in Cold Spraying , 2009 .

[17]  P. Shipway,et al.  Bonding Mechanisms in Cold Spraying: The Contributions of Metallurgical and Mechanical Components , 2009 .

[18]  T. Eden,et al.  Cold-Sprayed Aluminum Coatings for Magnesium Aircraft Components , 2009 .

[19]  M. Jahedi,et al.  Elimination of porosity in directly fabricated titanium via cold gas dynamic spraying , 2009 .

[20]  Eric Irissou,et al.  Review on Cold Spray Process and Technology: Part I—Intellectual Property , 2008 .

[21]  M. Boustie,et al.  Influence of Particle Velocity on Adhesion of Cold-Sprayed Splats , 2008, International Thermal Spray Conference.

[22]  H. Liao,et al.  Surface preparation by using laser cleaning in thermal spray , 2008 .

[23]  Roman Gr. Maev,et al.  Introduction to Low Pressure Gas Dynamic Spray , 2007 .

[24]  C. Zhang,et al.  Study on impact fusion at particle interfaces and its effect on coating microstructure in cold spraying , 2007 .

[25]  E. Yamaguchi,et al.  Effect of Substrate Temperature on Deposition Behavior of Copper Particles on Substrate Surfaces in the Cold Spray Process , 2007 .

[26]  Victor K. Champagne,et al.  The Cold Spray Materials Deposition Process : Fundamentals and Applications , 2007 .

[27]  P. Shipway,et al.  A Method for Characterizing the Degree of Inter-particle Bond Formation in Cold Sprayed Coatings , 2007 .

[28]  M. Boustie,et al.  Physical approach to adhesion testing using laser-driven shock waves , 2007 .

[29]  Eric Irissou,et al.  Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc and Tin Coatings , 2007, International Thermal Spray Conference.

[30]  C. Moreau,et al.  Investigation of Al-Al2O3 Cold Spray Coating Formation and Properties , 2007, International Thermal Spray Conference.

[31]  C. Zhang,et al.  Ti and Ti‐6Al‐4V Coatings by Cold Spraying and Microstructure Modification by Heat Treatment , 2007 .

[32]  William O’Neill,et al.  Cold gas dynamic manufacturing: A non-thermal approach to freeform fabrication , 2007 .

[33]  C. Zhang,et al.  Significant influences of metal reactivity and oxide films at particle surfaces on coating microstructure in cold spraying , 2007 .

[34]  P. Shipway,et al.  Effect of cold spray deposition of a titanium coating on fatigue behavior of a titanium alloy , 2006 .

[35]  M. Vardelle,et al.  Critical particle velocity under cold spray conditions , 2006 .

[36]  C. Coddet,et al.  Surface modifications induced by nanosecond pulsed Nd:YAG laser irradiation of metallic substrates , 2006 .

[37]  Anatolii Papyrin,et al.  Cold Spray Technology , 2006 .

[38]  P. Withers,et al.  Dynamic Analysis of Residual Stress Introduced by Laser Peening , 2006 .

[39]  S. Kuroda,et al.  Simulation of Solid Particle Impact Behavior for Spray Processes , 2006 .

[40]  L. Ajdelsztajn,et al.  Substrate roughness and thickness effects on cold spray nanocrystalline Al−Mg coatings , 2006 .

[41]  R. Oltra,et al.  XPS and SIMS study of aluminium native oxide modifications induced by Q‐switched Nd:YAG laser treatment , 2006 .

[42]  Tobias Schmidt,et al.  Development of a generalized parameter window for cold spray deposition , 2006 .

[43]  D. Duquesnay,et al.  ALUMINUM PROTECTIVE COATINGS - FATIGUE AND BOND STRENGTH PROPERTIES WITH RESPECT TO SURFACE PREPARATION TECHNIQUES: LASER ABLATION, SHOT PEENING AND GRIT BLASTING , 2006 .

[44]  Laurent Berthe,et al.  Application of laser shock adhesion testing to the study of the interlamellar strength and coating–substrate adhesion in cold-sprayed copper coating of aluminum , 2005 .

[45]  H. Liao,et al.  Role of the laser surface preparation on the adhesion of Ni−5%Al coatings deposited using the PROTAL process , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.

[46]  P. Shipway,et al.  Production of titanium deposits by cold-gas dynamic spray: Numerical modeling and experimental characterization , 2005, Thermal Spray 2005: Proceedings from the International Thermal Spray Conference.

[47]  P. Shipway,et al.  Cold gas dynamic spraying of aluminum: The role of substrate characteristics in deposit formation , 2005 .

[48]  M. Grujicic,et al.  Adiabatic shear instability based mechanism for particles/substrate bonding in the cold-gas dynamic-spray process , 2004 .

[49]  M. Boustie,et al.  Study of adhesion of PROTAL® copper coating of Al 2017 using the laser shock adhesion test (LASAT) , 2004 .

[50]  Christopher J. Sutcliffe,et al.  Analysis of cold gas dynamically sprayed aluminium deposits , 2004 .

[51]  Mica Grujicic,et al.  Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process , 2003 .

[52]  Hamid Assadi,et al.  Bonding mechanism in cold gas spraying , 2003 .

[53]  H. Liao,et al.  Influence of surface laser cleaning combined with substrate preheating on the splat morphology , 2003, Thermal Spray 2003: Proceedings from the International Thermal Spray Conference.

[54]  B. Jodoin.  Cold spray nozzle mach number limitation , 2002 .

[55]  M. Boustie,et al.  Application of the laser spallation technique to the measurement of the adhesion strength of tungsten carbide coatings on superalloy substrates , 2000 .

[56]  R. Dykhuizen,et al.  Particle velocity and deposition efficiency in the cold spray process , 1999 .

[57]  S. Sampath,et al.  Impact of high velocity cold spray particles , 1999 .

[58]  G. Montavon,et al.  Surface preparation and thermal spray in a single step: The PROTAL process—Example of application for an aluminum-base substrate , 1999 .

[59]  M. F. Smith,et al.  Gas dynamic principles of cold spray , 1998 .

[60]  V. Gupta,et al.  Measurement of interface strength by the modified laser spallation technique. II. Applications to metal/ceramic interfaces , 1993 .

[61]  G. Zambelli,et al.  Fracture toughness measurement of plasma sprayed ceramic coatings , 1989 .

[62]  M. Guagliano,et al.  Influence of Pre-Heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray , 2011 .

[63]  Changhee Lee,et al.  Deposition characteristics of copper particles on roughened substrates through kinetic spraying , 2009 .

[64]  A. Blouin,et al.  Laser Doppler interferometer based on a solid Fabry–Perot etalon for measurement of surface velocity in shock experiments , 2008 .

[65]  Victor K. Champagne,et al.  The cold spray materials deposition process , 2007 .

[66]  J. Karthikeyan.  COLD SPRAY TECHNOLOGY: INTERNATIONAL STATUS AND USA EFFORTS , 2004 .

[67]  M. Grujicica,et al.  Computational analysis of the interfacial bonding between feed-powder particles and the substrate in the cold-gas dynamic-spray process , 2003 .