Constitutive modeling for hot deformation behavior of ZA27 alloy

[1]  W. Li,et al.  Constitutive equations for high temperature flow stress prediction of Al–14Cu–7Ce alloy , 2011 .

[2]  Y. Lin,et al.  A critical review of experimental results and constitutive descriptions for metals and alloys in hot working , 2011 .

[3]  A. Daoud,et al.  Microstructure, thermal behavior and mechanical properties of squeeze cast SiC, ZrO2 or C reinforced ZA27 composites , 2011 .

[4]  Taiying Liu,et al.  Constitutive equations for elevated temperature flow stress of Ti–6Al–4V alloy considering the effect of strain , 2011 .

[5]  H. Celik,et al.  Investigation of the abrasive wear behaviour of ZA-27 alloy and CuSn10 bronze , 2011 .

[6]  S. To,et al.  Effect of Static Electropulsing on Microstructure and Elongation of a Zn-Al Alloy (ZA22) , 2011 .

[7]  A. Najafizadeh,et al.  Flow stress prediction at hot working conditions , 2010 .

[8]  S. To,et al.  Effects of dynamic electropulsing on microstructure and elongation of a Zn–Al alloy , 2009 .

[9]  Y. Lin,et al.  Modeling of flow stress of 42CrMo steel under hot compression , 2009 .

[10]  Xiaoming He,et al.  A method to predict flow stress considering dynamic recrystallization during hot deformation , 2008 .

[11]  Jue Zhong,et al.  Microstructural evolution in 42CrMo steel during compression at elevated temperatures , 2008 .

[12]  L. Katgerman,et al.  Constitutive analysis of wrought magnesium alloy Mg–Al4–Zn1 , 2007 .

[13]  Ali Shokuhfar,et al.  Prediction of hot deformation behaviour of 10Cr–10Ni–5Mo–2Cu steel , 2007 .

[14]  Y. Lu,et al.  Microstructural evolution of a Ti-4.5Al-3Mo-1V alloy during hot working , 2006 .

[15]  Y. Zhu.  General rule of phase decomposition in Zn-Al based alloys. (II): On effects of external stresses on phase transformation , 2004 .

[16]  A. Ismail,et al.  Effect of different Al contents on the microstructure, tensile and wear properties of Zn-based alloy , 2004 .

[17]  S. To,et al.  Tensile deformation-induced phase transformation in cast Zn-Al-based alloy (ZnAl7Cu3) , 2003 .

[18]  W. B. Lee,et al.  Ageing characteristics of furnace cooled eutectoid Zn-Al based alloy , 2003 .

[19]  S. To,et al.  Ageing characteristics of cast Zn-Al based alloy (ZnAl7Cu3) , 2003 .

[20]  S. To,et al.  Ultra-precision machining induced surface structural changes of Zn–Al alloy , 2002 .

[21]  W. Lee,et al.  Exothermic reaction in eutectoid Zn–Al based alloys , 1999 .

[22]  Y. Zhu,et al.  Phase decomposition in extruded Zn-Al based alloy , 1999 .

[23]  C. Sellars,et al.  On the mechanism of hot deformation , 1966 .

[24]  P. Robi,et al.  Prediction of hot deformation behavior of Al–5.9%Cu–0.5%Mg alloys with trace additions of Sn , 2011, Journal of Materials Science.

[25]  Chi Fai Cheung,et al.  Ultra-precision raster milling-induced phase decomposition and plastic deformation at the surface of a Zn-Al-based alloy , 2010 .

[26]  G. L’espérance,et al.  Ageing characteristics of dendritic and non-dendritic (stir-cast) Zn-Al alloy (ZA-27) , 1991 .

[27]  J. H. Hollomon,et al.  Effect of Strain Rate Upon Plastic Flow of Steel , 1944 .